diff mbox series

[v2] Input: gpio-keys - Cancel delayed work only in case of GPIO

Message ID 20220524135822.14764-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Mainlined
Commit cee409bbba0d1bd3fb73064fb480ff365f453b5d
Delegated to: Geert Uytterhoeven
Headers show
Series [v2] Input: gpio-keys - Cancel delayed work only in case of GPIO | expand

Commit Message

Prabhakar May 24, 2022, 1:58 p.m. UTC
gpio_keys module can either accept gpios or interrupts. The module
initializes delayed work in case of gpios only and is only used if
debounce timer is not used, so make sure cancel_delayed_work_sync()
is called only when its gpio-backed and debounce_use_hrtimer is false.

This fixes the issue seen below when the gpio_keys module is unloaded and
an interrupt pin is used instead of GPIO:

[  360.297569] ------------[ cut here ]------------
[  360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470
[  360.310531] Modules linked in: gpio_keys(-)
[  360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166
[  360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT)
[  360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  360.338318] pc : __flush_work+0x414/0x470
[  360.342385] lr : __cancel_work_timer+0x140/0x1b0
[  360.347065] sp : ffff80000a7fba00
[  360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000
[  360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001
[  360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000
[  360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48
[  360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40
[  360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c
[  360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008
[  360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080
[  360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458
[  360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000
[  360.422818] Call trace:
[  360.425299]  __flush_work+0x414/0x470
[  360.429012]  __cancel_work_timer+0x140/0x1b0
[  360.433340]  cancel_delayed_work_sync+0x10/0x18
[  360.437931]  gpio_keys_quiesce_key+0x28/0x58 [gpio_keys]
[  360.443327]  devm_action_release+0x10/0x18
[  360.447481]  release_nodes+0x8c/0x1a0
[  360.451194]  devres_release_all+0x90/0x100
[  360.455346]  device_unbind_cleanup+0x14/0x60
[  360.459677]  device_release_driver_internal+0xe8/0x168
[  360.464883]  driver_detach+0x4c/0x90
[  360.468509]  bus_remove_driver+0x54/0xb0
[  360.472485]  driver_unregister+0x2c/0x58
[  360.476462]  platform_driver_unregister+0x10/0x18
[  360.481230]  gpio_keys_exit+0x14/0x828 [gpio_keys]
[  360.486088]  __arm64_sys_delete_module+0x1e0/0x270
[  360.490945]  invoke_syscall+0x40/0xf8
[  360.494661]  el0_svc_common.constprop.3+0xf0/0x110
[  360.499515]  do_el0_svc+0x20/0x78
[  360.502877]  el0_svc+0x48/0xf8
[  360.505977]  el0t_64_sync_handler+0x88/0xb0
[  360.510216]  el0t_64_sync+0x148/0x14c
[  360.513930] irq event stamp: 4306
[  360.517288] hardirqs last  enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0
[  360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88
[  360.534204] softirqs last  enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0
[  360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0
[  360.550591] ---[ end trace 0000000000000000 ]---

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
* Fixed review comment suggested by Dmitry.
---
 drivers/input/keyboard/gpio_keys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Dmitry Torokhov May 28, 2022, 8:46 p.m. UTC | #1
On Tue, May 24, 2022 at 02:58:22PM +0100, Lad Prabhakar wrote:
> gpio_keys module can either accept gpios or interrupts. The module
> initializes delayed work in case of gpios only and is only used if
> debounce timer is not used, so make sure cancel_delayed_work_sync()
> is called only when its gpio-backed and debounce_use_hrtimer is false.
> 
> This fixes the issue seen below when the gpio_keys module is unloaded and
> an interrupt pin is used instead of GPIO:
> 
> [  360.297569] ------------[ cut here ]------------
> [  360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470
> [  360.310531] Modules linked in: gpio_keys(-)
> [  360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166
> [  360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT)
> [  360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [  360.338318] pc : __flush_work+0x414/0x470
> [  360.342385] lr : __cancel_work_timer+0x140/0x1b0
> [  360.347065] sp : ffff80000a7fba00
> [  360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000
> [  360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001
> [  360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000
> [  360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48
> [  360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40
> [  360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c
> [  360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008
> [  360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080
> [  360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458
> [  360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000
> [  360.422818] Call trace:
> [  360.425299]  __flush_work+0x414/0x470
> [  360.429012]  __cancel_work_timer+0x140/0x1b0
> [  360.433340]  cancel_delayed_work_sync+0x10/0x18
> [  360.437931]  gpio_keys_quiesce_key+0x28/0x58 [gpio_keys]
> [  360.443327]  devm_action_release+0x10/0x18
> [  360.447481]  release_nodes+0x8c/0x1a0
> [  360.451194]  devres_release_all+0x90/0x100
> [  360.455346]  device_unbind_cleanup+0x14/0x60
> [  360.459677]  device_release_driver_internal+0xe8/0x168
> [  360.464883]  driver_detach+0x4c/0x90
> [  360.468509]  bus_remove_driver+0x54/0xb0
> [  360.472485]  driver_unregister+0x2c/0x58
> [  360.476462]  platform_driver_unregister+0x10/0x18
> [  360.481230]  gpio_keys_exit+0x14/0x828 [gpio_keys]
> [  360.486088]  __arm64_sys_delete_module+0x1e0/0x270
> [  360.490945]  invoke_syscall+0x40/0xf8
> [  360.494661]  el0_svc_common.constprop.3+0xf0/0x110
> [  360.499515]  do_el0_svc+0x20/0x78
> [  360.502877]  el0_svc+0x48/0xf8
> [  360.505977]  el0t_64_sync_handler+0x88/0xb0
> [  360.510216]  el0t_64_sync+0x148/0x14c
> [  360.513930] irq event stamp: 4306
> [  360.517288] hardirqs last  enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0
> [  360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88
> [  360.534204] softirqs last  enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0
> [  360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0
> [  360.550591] ---[ end trace 0000000000000000 ]---
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Applied, thank you.
diff mbox series

Patch

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index d75a8b179a8a..a5dc4ab87fa1 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -131,7 +131,7 @@  static void gpio_keys_quiesce_key(void *data)
 
 	if (!bdata->gpiod)
 		hrtimer_cancel(&bdata->release_timer);
-	if (bdata->debounce_use_hrtimer)
+	else if (bdata->debounce_use_hrtimer)
 		hrtimer_cancel(&bdata->debounce_timer);
 	else
 		cancel_delayed_work_sync(&bdata->work);