| Message ID | 20220609234031.14803-8-laurent.pinchart@ideasonboard.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | Test plane alpha and zpos control | expand |
Quoting Laurent Pinchart (2022-06-10 00:40:28) > Add a test that enables multiple planes with different alpha values. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > tests/kms-test-plane-alpha.py | 97 +++++++++++++++++++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100755 tests/kms-test-plane-alpha.py > > diff --git a/tests/kms-test-plane-alpha.py b/tests/kms-test-plane-alpha.py > new file mode 100755 > index 000000000000..8802bfeae40c > --- /dev/null > +++ b/tests/kms-test-plane-alpha.py > @@ -0,0 +1,97 @@ > +#!/usr/bin/python3 > +# SPDX-License-Identifier: GPL-2.0-or-later > +# SPDX-FileCopyrightText: 2022 Renesas Electronics Corporation > + > +import kmstest > +import pykms > + > +class PlaneAlphaTest(kmstest.KMSTest): > + """Test composition with multiple planes and alpha channels.""" > + > + def handle_page_flip(self, frame, time): > + self.logger.log('Page flip complete') > + > + def find_pipeline(self): > + # Find a CRTC that has multiple planes with a connected connector > + for connector in self.output_connectors(): > + # Skip disconnected connectors > + if not connector.connected(): > + continue > + > + # Add the connector to the map > + for crtc in connector.get_possible_crtcs(): > + planes = [] > + for plane in self.card.planes: > + if plane.supports_crtc(crtc) and plane != crtc.primary_plane: > + planes.append(plane) > + > + if len(planes): > + return crtc, connector, planes > + > + return None, None, None > + > + def main(self): > + self.start('composition with alpha control') > + > + crtc, connector, planes = self.find_pipeline() > + if crtc is None: > + self.skip('no suitable pipeline') > + return > + > + # Get the default mode > + try: > + mode = connector.get_default_mode() > + except KeyError: > + self.skip('no mode available') > + return > + > + self.logger.log(f'Testing connector {connector.fullname}, CRTC {crtc.id}, ' > + f'mode {mode.name} with {len(planes)} planes ' > + f'(P: {crtc.primary_plane.id}, O: {[plane.id for plane in planes]})') > + > + # Create a frame buffer > + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') > + pykms.draw_test_pattern(fb) > + > + # Set the mode with a primary plane > + ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) > + if ret < 0: > + self.fail(f'atomic mode set failed with {ret}') > + return > + > + req = kmstest.AtomicRequest(self) > + req.add(crtc.primary_plane, 'alpha', '50%') Nice. That's better than having to identify the range and set it explicitly. > + ret = req.commit_sync(True) > + if ret < 0: > + self.fail(f'failed to set alpha for primary plane: {ret}') > + return > + > + self.run(3) > + > + # Add all other planes one by one > + alpha = 20 > + offset = 100 > + for plane in planes: > + source = kmstest.Rect(0, 0, fb.width, fb.height) > + destination = kmstest.Rect(offset, offset, fb.width, fb.height) > + ret = self.atomic_plane_set(plane, crtc, source, destination, fb, alpha=f'{alpha}%') > + if ret < 0: > + self.fail(f'atomic plane set failed with {ret}') > + break > + > + self.logger.log(f'Adding plane {plane.id}') > + self.run(1) > + > + if self.flips == 0: > + self.fail('No page flip registered') > + break > + > + alpha = min(alpha + 20, 100) Curious to see this. I'll have to spin up a board and display. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > + offset += 50 > + > + else: > + self.success() > + > + self.atomic_crtc_disable(crtc) > + > +PlaneAlphaTest().execute() > -- > Regards, > > Laurent Pinchart >
diff --git a/tests/kms-test-plane-alpha.py b/tests/kms-test-plane-alpha.py new file mode 100755 index 000000000000..8802bfeae40c --- /dev/null +++ b/tests/kms-test-plane-alpha.py @@ -0,0 +1,97 @@ +#!/usr/bin/python3 +# SPDX-License-Identifier: GPL-2.0-or-later +# SPDX-FileCopyrightText: 2022 Renesas Electronics Corporation + +import kmstest +import pykms + +class PlaneAlphaTest(kmstest.KMSTest): + """Test composition with multiple planes and alpha channels.""" + + def handle_page_flip(self, frame, time): + self.logger.log('Page flip complete') + + def find_pipeline(self): + # Find a CRTC that has multiple planes with a connected connector + for connector in self.output_connectors(): + # Skip disconnected connectors + if not connector.connected(): + continue + + # Add the connector to the map + for crtc in connector.get_possible_crtcs(): + planes = [] + for plane in self.card.planes: + if plane.supports_crtc(crtc) and plane != crtc.primary_plane: + planes.append(plane) + + if len(planes): + return crtc, connector, planes + + return None, None, None + + def main(self): + self.start('composition with alpha control') + + crtc, connector, planes = self.find_pipeline() + if crtc is None: + self.skip('no suitable pipeline') + return + + # Get the default mode + try: + mode = connector.get_default_mode() + except KeyError: + self.skip('no mode available') + return + + self.logger.log(f'Testing connector {connector.fullname}, CRTC {crtc.id}, ' + f'mode {mode.name} with {len(planes)} planes ' + f'(P: {crtc.primary_plane.id}, O: {[plane.id for plane in planes]})') + + # Create a frame buffer + fb = pykms.DumbFramebuffer(self.card, mode.hdisplay, mode.vdisplay, 'XR24') + pykms.draw_test_pattern(fb) + + # Set the mode with a primary plane + ret = self.atomic_crtc_mode_set(crtc, connector, mode, fb) + if ret < 0: + self.fail(f'atomic mode set failed with {ret}') + return + + req = kmstest.AtomicRequest(self) + req.add(crtc.primary_plane, 'alpha', '50%') + ret = req.commit_sync(True) + if ret < 0: + self.fail(f'failed to set alpha for primary plane: {ret}') + return + + self.run(3) + + # Add all other planes one by one + alpha = 20 + offset = 100 + for plane in planes: + source = kmstest.Rect(0, 0, fb.width, fb.height) + destination = kmstest.Rect(offset, offset, fb.width, fb.height) + ret = self.atomic_plane_set(plane, crtc, source, destination, fb, alpha=f'{alpha}%') + if ret < 0: + self.fail(f'atomic plane set failed with {ret}') + break + + self.logger.log(f'Adding plane {plane.id}') + self.run(1) + + if self.flips == 0: + self.fail('No page flip registered') + break + + alpha = min(alpha + 20, 100) + offset += 50 + + else: + self.success() + + self.atomic_crtc_disable(crtc) + +PlaneAlphaTest().execute()
Add a test that enables multiple planes with different alpha values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- tests/kms-test-plane-alpha.py | 97 +++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100755 tests/kms-test-plane-alpha.py