diff mbox series

[v4,2/2] i2c: Add Renesas RZ/V2M controller

Message ID 20220708100350.12523-3-phil.edworthy@renesas.com (mailing list archive)
State Mainlined
Delegated to: Geert Uytterhoeven
Headers show
Series i2c: Add new driver for Renesas RZ/V2M controller | expand

Commit Message

Phil Edworthy July 8, 2022, 10:03 a.m. UTC 
Yet another i2c controller from Renesas that is found on the RZ/V2M
(r9a09g011) SoC. It can support only 100kHz and 400KHz operation.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v4:
 - Multiline comment fix
 - Use GENMASK
 - Fix too many parentheses
 - Better use of sizeof()
 - Move MODULE_DEVICE_TABLE close to use
 - Use pm_runtime_resume_and_get() and check return val
 - Replace NOIRQ_SYSTEM_SLEEP_PM_OPS with SYSTEM_SLEEP_PM_OPS
   so we can use runtime PM in suspend and resume.
v3:
 - Lots of small fixes base don Andy Shevchenko's review
 - Use devm_reset_control_get_shared() instead of devm_reset_control_get()
v2:
 - Use the new NOIRQ_SYSTEM_SLEEP_PM_OPS() as suggested by Arnd
 - Lots of small fixes based on Geert's review
---
 drivers/i2c/busses/Kconfig     |  10 +
 drivers/i2c/busses/Makefile    |   1 +
 drivers/i2c/busses/i2c-rzv2m.c | 533 +++++++++++++++++++++++++++++++++
 3 files changed, 544 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-rzv2m.c

Comments

Andy Shevchenko July 8, 2022, 11:07 a.m. UTC | #1 
On Fri, Jul 08, 2022 at 11:03:50AM +0100, Phil Edworthy wrote:
> Yet another i2c controller from Renesas that is found on the RZ/V2M
> (r9a09g011) SoC. It can support only 100kHz and 400KHz operation.

LGTM!

FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v4:
>  - Multiline comment fix
>  - Use GENMASK
>  - Fix too many parentheses
>  - Better use of sizeof()
>  - Move MODULE_DEVICE_TABLE close to use
>  - Use pm_runtime_resume_and_get() and check return val
>  - Replace NOIRQ_SYSTEM_SLEEP_PM_OPS with SYSTEM_SLEEP_PM_OPS
>    so we can use runtime PM in suspend and resume.
> v3:
>  - Lots of small fixes base don Andy Shevchenko's review
>  - Use devm_reset_control_get_shared() instead of devm_reset_control_get()
> v2:
>  - Use the new NOIRQ_SYSTEM_SLEEP_PM_OPS() as suggested by Arnd
>  - Lots of small fixes based on Geert's review
> ---
>  drivers/i2c/busses/Kconfig     |  10 +
>  drivers/i2c/busses/Makefile    |   1 +
>  drivers/i2c/busses/i2c-rzv2m.c | 533 +++++++++++++++++++++++++++++++++
>  3 files changed, 544 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-rzv2m.c
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index b1d7069dd377..9e3f9eb1ea3c 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -984,6 +984,16 @@ config I2C_RK3X
>  	  This driver can also be built as a module. If so, the module will
>  	  be called i2c-rk3x.
>  
> +config I2C_RZV2M
> +	tristate "Renesas RZ/V2M adapter"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  Renesas RZ/V2M  I2C interface.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called i2c-rzv2m.
> +
>  config I2C_S3C2410
>  	tristate "S3C/Exynos I2C Driver"
>  	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index b0a10e5d9ee9..7792ffc591f0 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-geni.o
>  obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
>  obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
>  obj-$(CONFIG_I2C_RK3X)		+= i2c-rk3x.o
> +obj-$(CONFIG_I2C_RZV2M)		+= i2c-rzv2m.o
>  obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
>  obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
>  obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
> diff --git a/drivers/i2c/busses/i2c-rzv2m.c b/drivers/i2c/busses/i2c-rzv2m.c
> new file mode 100644
> index 000000000000..156bfef0dcd0
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-rzv2m.c
> @@ -0,0 +1,533 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the Renesas RZ/V2M I2C unit
> + *
> + * Copyright (C) 2016-2022 Renesas Electronics Corporation
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/i2c.h>
> +#include <linux/jiffies.h>
> +#include <linux/kernel.h>
> +#include <linux/math64.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +
> +/* Register offsets */
> +#define IICB0DAT	0x00		/* Data Register */
> +#define IICB0CTL0	0x08		/* Control Register 0 */
> +#define IICB0TRG	0x0C		/* Trigger Register */
> +#define IICB0STR0	0x10		/* Status Register 0 */
> +#define IICB0CTL1	0x20		/* Control Register 1 */
> +#define IICB0WL		0x24		/* Low Level Width Setting Reg */
> +#define IICB0WH		0x28		/* How Level Width Setting Reg */
> +
> +/* IICB0CTL0 */
> +#define IICB0IICE	BIT(7)		/* I2C Enable */
> +#define IICB0SLWT	BIT(1)		/* Interrupt Request Timing */
> +#define IICB0SLAC	BIT(0)		/* Acknowledge */
> +
> +/* IICB0TRG */
> +#define IICB0WRET	BIT(2)		/* Quit Wait Trigger */
> +#define IICB0STT	BIT(1)		/* Create Start Condition Trigger */
> +#define IICB0SPT	BIT(0)		/* Create Stop Condition Trigger */
> +
> +/* IICB0STR0 */
> +#define IICB0SSAC	BIT(8)		/* Ack Flag */
> +#define IICB0SSBS	BIT(6)		/* Bus Flag */
> +#define IICB0SSSP	BIT(4)		/* Stop Condition Flag */
> +
> +/* IICB0CTL1 */
> +#define IICB0MDSC	BIT(7)		/* Bus Mode */
> +#define IICB0SLSE	BIT(1)		/* Start condition output */
> +
> +#define bit_setl(addr, val)		writel(readl(addr) | (val), (addr))
> +#define bit_clrl(addr, val)		writel(readl(addr) & ~(val), (addr))
> +
> +struct rzv2m_i2c_priv {
> +	void __iomem *base;
> +	struct i2c_adapter adap;
> +	struct clk *clk;
> +	int bus_mode;
> +	struct completion msg_tia_done;
> +	u32 iicb0wl;
> +	u32 iicb0wh;
> +};
> +
> +enum bcr_index {
> +	RZV2M_I2C_100K = 0,
> +	RZV2M_I2C_400K,
> +};
> +
> +struct bitrate_config {
> +	unsigned int percent_low;
> +	unsigned int min_hold_time_ns;
> +};
> +
> +static const struct bitrate_config bitrate_configs[] = {
> +	[RZV2M_I2C_100K] = { 47, 3450 },
> +	[RZV2M_I2C_400K] = { 52, 900 },
> +};
> +
> +static irqreturn_t rzv2m_i2c_tia_irq_handler(int this_irq, void *dev_id)
> +{
> +	struct rzv2m_i2c_priv *priv = dev_id;
> +
> +	complete(&priv->msg_tia_done);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/* Calculate IICB0WL and IICB0WH */
> +static int rzv2m_i2c_clock_calculate(struct device *dev,
> +				     struct rzv2m_i2c_priv *priv)
> +{
> +	const struct bitrate_config *config;
> +	unsigned int hold_time_ns;
> +	unsigned int total_pclks;
> +	unsigned int trf_pclks;
> +	unsigned long pclk_hz;
> +	struct i2c_timings t;
> +	u32 trf_ns;
> +
> +	i2c_parse_fw_timings(dev, &t, true);
> +
> +	pclk_hz = clk_get_rate(priv->clk);
> +	total_pclks = pclk_hz / t.bus_freq_hz;
> +
> +	trf_ns = t.scl_rise_ns + t.scl_fall_ns;
> +	trf_pclks = mul_u64_u32_div(pclk_hz, trf_ns, NSEC_PER_SEC);
> +
> +	/* Config setting */
> +	switch (t.bus_freq_hz) {
> +	case I2C_MAX_FAST_MODE_FREQ:
> +		priv->bus_mode = RZV2M_I2C_400K;
> +		break;
> +	case I2C_MAX_STANDARD_MODE_FREQ:
> +		priv->bus_mode = RZV2M_I2C_100K;
> +		break;
> +	default:
> +		dev_err(dev, "transfer speed is invalid\n");
> +		return -EINVAL;
> +	}
> +	config = &bitrate_configs[priv->bus_mode];
> +
> +	/* IICB0WL = (percent_low / Transfer clock) x PCLK */
> +	priv->iicb0wl = total_pclks * config->percent_low / 100;
> +	if (priv->iicb0wl > (BIT(10) - 1))
> +		return -EINVAL;
> +
> +	/* IICB0WH = ((percent_high / Transfer clock) x PCLK) - (tR + tF) */
> +	priv->iicb0wh = total_pclks - priv->iicb0wl - trf_pclks;
> +	if (priv->iicb0wh > (BIT(10) - 1))
> +		return -EINVAL;
> +
> +	/*
> +	 * Data hold time must be less than 0.9us in fast mode and
> +	 * 3.45us in standard mode.
> +	 * Data hold time = IICB0WL[9:2] / PCLK
> +	 */
> +	hold_time_ns = div64_ul((u64)(priv->iicb0wl >> 2) * NSEC_PER_SEC, pclk_hz);
> +	if (hold_time_ns > config->min_hold_time_ns) {
> +		dev_err(dev, "data hold time %dns is over %dns\n",
> +			hold_time_ns, config->min_hold_time_ns);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static void rzv2m_i2c_init(struct rzv2m_i2c_priv *priv)
> +{
> +	u32 i2c_ctl0;
> +	u32 i2c_ctl1;
> +
> +	/* i2c disable */
> +	writel(0, priv->base + IICB0CTL0);
> +
> +	/* IICB0CTL1 setting */
> +	i2c_ctl1 = IICB0SLSE;
> +	if (priv->bus_mode == RZV2M_I2C_400K)
> +		i2c_ctl1 |= IICB0MDSC;
> +	writel(i2c_ctl1, priv->base + IICB0CTL1);
> +
> +	/* IICB0WL IICB0WH setting */
> +	writel(priv->iicb0wl, priv->base + IICB0WL);
> +	writel(priv->iicb0wh, priv->base + IICB0WH);
> +
> +	/* i2c enable after setting */
> +	i2c_ctl0 = IICB0SLWT | IICB0SLAC | IICB0IICE;
> +	writel(i2c_ctl0, priv->base + IICB0CTL0);
> +}
> +
> +static int rzv2m_i2c_write_with_ack(struct rzv2m_i2c_priv *priv, u32 data)
> +{
> +	unsigned long time_left;
> +
> +	reinit_completion(&priv->msg_tia_done);
> +
> +	writel(data, priv->base + IICB0DAT);
> +
> +	time_left = wait_for_completion_timeout(&priv->msg_tia_done,
> +						priv->adap.timeout);
> +	if (!time_left)
> +		return -ETIMEDOUT;
> +
> +	/* Confirm ACK */
> +	if ((readl(priv->base + IICB0STR0) & IICB0SSAC) != IICB0SSAC)
> +		return -ENXIO;
> +
> +	return 0;
> +}
> +
> +static int rzv2m_i2c_read_with_ack(struct rzv2m_i2c_priv *priv, u8 *data,
> +				   bool last)
> +{
> +	unsigned long time_left;
> +	u32 data_tmp;
> +
> +	reinit_completion(&priv->msg_tia_done);
> +
> +	/* Interrupt request timing : 8th clock */
> +	bit_clrl(priv->base + IICB0CTL0, IICB0SLWT);
> +
> +	/* Exit the wait state */
> +	writel(IICB0WRET, priv->base + IICB0TRG);
> +
> +	/* Wait for transaction */
> +	time_left = wait_for_completion_timeout(&priv->msg_tia_done,
> +						priv->adap.timeout);
> +	if (!time_left)
> +		return -ETIMEDOUT;
> +
> +	if (last) {
> +		/* Disable ACK */
> +		bit_clrl(priv->base + IICB0CTL0, IICB0SLAC);
> +
> +		/* Read data*/
> +		data_tmp = readl(priv->base + IICB0DAT);
> +
> +		/* Interrupt request timing : 9th clock */
> +		bit_setl(priv->base + IICB0CTL0, IICB0SLWT);
> +
> +		/* Exit the wait state */
> +		writel(IICB0WRET, priv->base + IICB0TRG);
> +
> +		/* Wait for transaction */
> +		time_left = wait_for_completion_timeout(&priv->msg_tia_done,
> +							priv->adap.timeout);
> +		if (!time_left)
> +			return -ETIMEDOUT;
> +
> +		/* Enable ACK */
> +		bit_setl(priv->base + IICB0CTL0, IICB0SLAC);
> +	} else {
> +		/* Read data */
> +		data_tmp = readl(priv->base + IICB0DAT);
> +	}
> +
> +	*data = data_tmp;
> +
> +	return 0;
> +}
> +
> +static int rzv2m_i2c_send(struct rzv2m_i2c_priv *priv, struct i2c_msg *msg,
> +			  unsigned int *count)
> +{
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < msg->len; i++) {
> +		ret = rzv2m_i2c_write_with_ack(priv, msg->buf[i]);
> +		if (ret < 0)
> +			return ret;
> +	}
> +	*count = i;
> +
> +	return 0;
> +}
> +
> +static int rzv2m_i2c_receive(struct rzv2m_i2c_priv *priv, struct i2c_msg *msg,
> +			     unsigned int *count)
> +{
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < msg->len; i++) {
> +		ret = rzv2m_i2c_read_with_ack(priv, &msg->buf[i],
> +					      (msg->len - 1) == i);
> +		if (ret < 0)
> +			return ret;
> +	}
> +	*count = i;
> +
> +	return 0;
> +}
> +
> +static int rzv2m_i2c_send_address(struct rzv2m_i2c_priv *priv,
> +				  struct i2c_msg *msg)
> +{
> +	u32 addr;
> +	int ret;
> +
> +	if (msg->flags & I2C_M_TEN) {
> +		/*
> +		 * 10-bit address
> +		 *   addr_1: 5'b11110 | addr[9:8] | (R/nW)
> +		 *   addr_2: addr[7:0]
> +		 */
> +		addr = 0xf0 | ((msg->addr & GENMASK(9, 8)) >> 7);
> +		addr |= !!(msg->flags & I2C_M_RD);
> +		/* Send 1st address(extend code) */
> +		ret = rzv2m_i2c_write_with_ack(priv, addr);
> +		if (ret)
> +			return ret;
> +
> +		/* Send 2nd address */
> +		ret = rzv2m_i2c_write_with_ack(priv, msg->addr & 0xff);
> +	} else {
> +		/* 7-bit address */
> +		addr = i2c_8bit_addr_from_msg(msg);
> +		ret = rzv2m_i2c_write_with_ack(priv, addr);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rzv2m_i2c_stop_condition(struct rzv2m_i2c_priv *priv)
> +{
> +	u32 value;
> +
> +	/* Send stop condition */
> +	writel(IICB0SPT, priv->base + IICB0TRG);
> +	return readl_poll_timeout(priv->base + IICB0STR0,
> +				  value, value & IICB0SSSP,
> +				  100, jiffies_to_usecs(priv->adap.timeout));
> +}
> +
> +static int rzv2m_i2c_master_xfer1(struct rzv2m_i2c_priv *priv,
> +				  struct i2c_msg *msg, int stop)
> +{
> +	unsigned int count = 0;
> +	int ret, read = !!(msg->flags & I2C_M_RD);
> +
> +	/* Send start condition */
> +	writel(IICB0STT, priv->base + IICB0TRG);
> +
> +	ret = rzv2m_i2c_send_address(priv, msg);
> +	if (!ret) {
> +		if (read)
> +			ret = rzv2m_i2c_receive(priv, msg, &count);
> +		else
> +			ret = rzv2m_i2c_send(priv, msg, &count);
> +
> +		if (!ret && stop)
> +			ret = rzv2m_i2c_stop_condition(priv);
> +	}
> +
> +	if (ret == -ENXIO)
> +		rzv2m_i2c_stop_condition(priv);
> +	else if (ret < 0)
> +		rzv2m_i2c_init(priv);
> +	else
> +		ret = count;
> +
> +	return ret;
> +}
> +
> +static int rzv2m_i2c_master_xfer(struct i2c_adapter *adap,
> +				 struct i2c_msg *msgs, int num)
> +{
> +	struct rzv2m_i2c_priv *priv = i2c_get_adapdata(adap);
> +	struct device *dev = priv->adap.dev.parent;
> +	unsigned int i;
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (readl(priv->base + IICB0STR0) & IICB0SSBS) {
> +		ret = -EAGAIN;
> +		goto out;
> +	}
> +
> +	/* I2C main transfer */
> +	for (i = 0; i < num; i++) {
> +		ret = rzv2m_i2c_master_xfer1(priv, &msgs[i], i == (num - 1));
> +		if (ret < 0)
> +			goto out;
> +	}
> +	ret = num;
> +
> +out:
> +	pm_runtime_mark_last_busy(dev);
> +	pm_runtime_put_autosuspend(dev);
> +
> +	return ret;
> +}
> +
> +static u32 rzv2m_i2c_func(struct i2c_adapter *adap)
> +{
> +	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
> +	       I2C_FUNC_10BIT_ADDR;
> +}
> +
> +static const struct i2c_adapter_quirks rzv2m_i2c_quirks = {
> +	.flags = I2C_AQ_NO_ZERO_LEN,
> +};
> +
> +static struct i2c_algorithm rzv2m_i2c_algo = {
> +	.master_xfer = rzv2m_i2c_master_xfer,
> +	.functionality = rzv2m_i2c_func,
> +};
> +
> +static int rzv2m_i2c_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct rzv2m_i2c_priv *priv;
> +	struct reset_control *rstc;
> +	struct i2c_adapter *adap;
> +	struct resource *res;
> +	int irq, ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	priv->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(priv->clk))
> +		return dev_err_probe(dev, PTR_ERR(priv->clk), "Can't get clock\n");
> +
> +	rstc = devm_reset_control_get_shared(dev, NULL);
> +	if (IS_ERR(rstc))
> +		return dev_err_probe(dev, PTR_ERR(rstc), "Missing reset ctrl\n");
> +	/*
> +	 * The reset also affects other HW that is not under the control
> +	 * of Linux. Therefore, all we can do is deassert the reset.
> +	 */
> +	reset_control_deassert(rstc);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return irq;
> +
> +	ret = devm_request_irq(dev, irq, rzv2m_i2c_tia_irq_handler, 0,
> +			       dev_name(dev), priv);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "Unable to request irq %d\n", irq);
> +
> +	adap = &priv->adap;
> +	adap->nr = pdev->id;
> +	adap->algo = &rzv2m_i2c_algo;
> +	adap->quirks = &rzv2m_i2c_quirks;
> +	adap->class = I2C_CLASS_DEPRECATED;
> +	adap->dev.parent = dev;
> +	adap->owner = THIS_MODULE;
> +	device_set_node(&adap->dev, dev_fwnode(dev));
> +	i2c_set_adapdata(adap, priv);
> +	strscpy(adap->name, pdev->name, sizeof(adap->name));
> +	init_completion(&priv->msg_tia_done);
> +
> +	ret = rzv2m_i2c_clock_calculate(dev, priv);
> +	if (ret < 0)
> +		return ret;
> +
> +	pm_runtime_enable(dev);
> +
> +	pm_runtime_get_sync(dev);
> +	rzv2m_i2c_init(priv);
> +	pm_runtime_put(dev);
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	ret = i2c_add_numbered_adapter(adap);
> +	if (ret < 0)
> +		pm_runtime_disable(dev);
> +
> +	return ret;
> +}
> +
> +static int rzv2m_i2c_remove(struct platform_device *pdev)
> +{
> +	struct rzv2m_i2c_priv *priv = platform_get_drvdata(pdev);
> +	struct device *dev = priv->adap.dev.parent;
> +
> +	i2c_del_adapter(&priv->adap);
> +	bit_clrl(priv->base + IICB0CTL0, IICB0IICE);
> +	pm_runtime_disable(dev);
> +
> +	return 0;
> +}
> +
> +static int rzv2m_i2c_suspend(struct device *dev)
> +{
> +	struct rzv2m_i2c_priv *priv = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	bit_clrl(priv->base + IICB0CTL0, IICB0IICE);
> +	pm_runtime_put(dev);
> +
> +	return 0;
> +}
> +
> +static int rzv2m_i2c_resume(struct device *dev)
> +{
> +	struct rzv2m_i2c_priv *priv = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = rzv2m_i2c_clock_calculate(dev, priv);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	rzv2m_i2c_init(priv);
> +	pm_runtime_put(dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id rzv2m_i2c_ids[] = {
> +	{ .compatible = "renesas,rzv2m-i2c" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, rzv2m_i2c_ids);
> +
> +static const struct dev_pm_ops rzv2m_i2c_pm_ops = {
> +	SYSTEM_SLEEP_PM_OPS(rzv2m_i2c_suspend, rzv2m_i2c_resume)
> +};
> +
> +static struct platform_driver rzv2m_i2c_driver = {
> +	.driver = {
> +		.name = "rzv2m-i2c",
> +		.of_match_table = rzv2m_i2c_ids,
> +		.pm = pm_sleep_ptr(&rzv2m_i2c_pm_ops),
> +	},
> +	.probe	= rzv2m_i2c_probe,
> +	.remove	= rzv2m_i2c_remove,
> +};
> +module_platform_driver(rzv2m_i2c_driver);
> +
> +MODULE_DESCRIPTION("RZ/V2M I2C bus driver");
> +MODULE_AUTHOR("Renesas Electronics Corporation");
> +MODULE_LICENSE("GPL");
> -- 
> 2.34.1
>
Philipp Zabel July 8, 2022, 11:56 a.m. UTC | #2 
On Fr, 2022-07-08 at 11:03 +0100, Phil Edworthy wrote:
> Yet another i2c controller from Renesas that is found on the RZ/V2M
> (r9a09g011) SoC. It can support only 100kHz and 400KHz operation.
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>


Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

for the reset handling.

regards
Philipp
Wolfram Sang July 22, 2022, 4:07 p.m. UTC | #3 
Hi Phil,

> Yet another i2c controller from Renesas that is found on the RZ/V2M
> (r9a09g011) SoC. It can support only 100kHz and 400KHz operation.

Geez, you are right with "yet another". One wonders why the 5 others are
not enough?

> +static int rzv2m_i2c_master_xfer1(struct rzv2m_i2c_priv *priv,
> +				  struct i2c_msg *msg, int stop)

I'd prefer "rzv2m_i2c_master_xfer_msg" for this function.s

> +	adap->class = I2C_CLASS_DEPRECATED;

You don't need to set the class to deprecated because there can't be a
previous version which now loses this functionality and needs to inform
userspace about it. .class can be 0 here.

Reset looks looks, good thanks!

I can fix up these minor things when applying if you don't mind.

Happy hacking,

   Wolfram
Wolfram Sang July 22, 2022, 4:45 p.m. UTC | #4 
On Fri, Jul 08, 2022 at 11:03:50AM +0100, Phil Edworthy wrote:
> Yet another i2c controller from Renesas that is found on the RZ/V2M
> (r9a09g011) SoC. It can support only 100kHz and 400KHz operation.
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>

Applied to for-next with the minor fixes I mentioned, thanks!

If you want to maintain the driver further, could you send an addition
to the MAINTAINES file, too?
Phil Edworthy Aug. 1, 2022, 6:46 a.m. UTC | #5 
Hi Wolfram,

On 22 July 2022 17:07 Wolfram Sang wrote
> > Yet another i2c controller from Renesas that is found on the RZ/V2M
> > (r9a09g011) SoC. It can support only 100kHz and 400KHz operation.
> 
> Geez, you are right with "yet another". One wonders why the 5 others are
> not enough?
Quite...

> > +static int rzv2m_i2c_master_xfer1(struct rzv2m_i2c_priv *priv,
> > +				  struct i2c_msg *msg, int stop)
> 
> I'd prefer "rzv2m_i2c_master_xfer_msg" for this function.s
> 
> > +	adap->class = I2C_CLASS_DEPRECATED;
> 
> You don't need to set the class to deprecated because there can't be a
> previous version which now loses this functionality and needs to inform
> userspace about it. .class can be 0 here.
Ok
 
> Reset looks looks, good thanks!
> 
> I can fix up these minor things when applying if you don't mind.
Thanks!

Phil
diff mbox series

Patch

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b1d7069dd377..9e3f9eb1ea3c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -984,6 +984,16 @@  config I2C_RK3X
 	  This driver can also be built as a module. If so, the module will
 	  be called i2c-rk3x.
 
+config I2C_RZV2M
+	tristate "Renesas RZ/V2M adapter"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  Renesas RZ/V2M  I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-rzv2m.
+
 config I2C_S3C2410
 	tristate "S3C/Exynos I2C Driver"
 	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index b0a10e5d9ee9..7792ffc591f0 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -101,6 +101,7 @@  obj-$(CONFIG_I2C_QCOM_GENI)	+= i2c-qcom-geni.o
 obj-$(CONFIG_I2C_QUP)		+= i2c-qup.o
 obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
 obj-$(CONFIG_I2C_RK3X)		+= i2c-rk3x.o
+obj-$(CONFIG_I2C_RZV2M)		+= i2c-rzv2m.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
 obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
diff --git a/drivers/i2c/busses/i2c-rzv2m.c b/drivers/i2c/busses/i2c-rzv2m.c
new file mode 100644
index 000000000000..156bfef0dcd0
--- /dev/null
+++ b/drivers/i2c/busses/i2c-rzv2m.c
@@ -0,0 +1,533 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Renesas RZ/V2M I2C unit
+ *
+ * Copyright (C) 2016-2022 Renesas Electronics Corporation
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+/* Register offsets */
+#define IICB0DAT	0x00		/* Data Register */
+#define IICB0CTL0	0x08		/* Control Register 0 */
+#define IICB0TRG	0x0C		/* Trigger Register */
+#define IICB0STR0	0x10		/* Status Register 0 */
+#define IICB0CTL1	0x20		/* Control Register 1 */
+#define IICB0WL		0x24		/* Low Level Width Setting Reg */
+#define IICB0WH		0x28		/* How Level Width Setting Reg */
+
+/* IICB0CTL0 */
+#define IICB0IICE	BIT(7)		/* I2C Enable */
+#define IICB0SLWT	BIT(1)		/* Interrupt Request Timing */
+#define IICB0SLAC	BIT(0)		/* Acknowledge */
+
+/* IICB0TRG */
+#define IICB0WRET	BIT(2)		/* Quit Wait Trigger */
+#define IICB0STT	BIT(1)		/* Create Start Condition Trigger */
+#define IICB0SPT	BIT(0)		/* Create Stop Condition Trigger */
+
+/* IICB0STR0 */
+#define IICB0SSAC	BIT(8)		/* Ack Flag */
+#define IICB0SSBS	BIT(6)		/* Bus Flag */
+#define IICB0SSSP	BIT(4)		/* Stop Condition Flag */
+
+/* IICB0CTL1 */
+#define IICB0MDSC	BIT(7)		/* Bus Mode */
+#define IICB0SLSE	BIT(1)		/* Start condition output */
+
+#define bit_setl(addr, val)		writel(readl(addr) | (val), (addr))
+#define bit_clrl(addr, val)		writel(readl(addr) & ~(val), (addr))
+
+struct rzv2m_i2c_priv {
+	void __iomem *base;
+	struct i2c_adapter adap;
+	struct clk *clk;
+	int bus_mode;
+	struct completion msg_tia_done;
+	u32 iicb0wl;
+	u32 iicb0wh;
+};
+
+enum bcr_index {
+	RZV2M_I2C_100K = 0,
+	RZV2M_I2C_400K,
+};
+
+struct bitrate_config {
+	unsigned int percent_low;
+	unsigned int min_hold_time_ns;
+};
+
+static const struct bitrate_config bitrate_configs[] = {
+	[RZV2M_I2C_100K] = { 47, 3450 },
+	[RZV2M_I2C_400K] = { 52, 900 },
+};
+
+static irqreturn_t rzv2m_i2c_tia_irq_handler(int this_irq, void *dev_id)
+{
+	struct rzv2m_i2c_priv *priv = dev_id;
+
+	complete(&priv->msg_tia_done);
+
+	return IRQ_HANDLED;
+}
+
+/* Calculate IICB0WL and IICB0WH */
+static int rzv2m_i2c_clock_calculate(struct device *dev,
+				     struct rzv2m_i2c_priv *priv)
+{
+	const struct bitrate_config *config;
+	unsigned int hold_time_ns;
+	unsigned int total_pclks;
+	unsigned int trf_pclks;
+	unsigned long pclk_hz;
+	struct i2c_timings t;
+	u32 trf_ns;
+
+	i2c_parse_fw_timings(dev, &t, true);
+
+	pclk_hz = clk_get_rate(priv->clk);
+	total_pclks = pclk_hz / t.bus_freq_hz;
+
+	trf_ns = t.scl_rise_ns + t.scl_fall_ns;
+	trf_pclks = mul_u64_u32_div(pclk_hz, trf_ns, NSEC_PER_SEC);
+
+	/* Config setting */
+	switch (t.bus_freq_hz) {
+	case I2C_MAX_FAST_MODE_FREQ:
+		priv->bus_mode = RZV2M_I2C_400K;
+		break;
+	case I2C_MAX_STANDARD_MODE_FREQ:
+		priv->bus_mode = RZV2M_I2C_100K;
+		break;
+	default:
+		dev_err(dev, "transfer speed is invalid\n");
+		return -EINVAL;
+	}
+	config = &bitrate_configs[priv->bus_mode];
+
+	/* IICB0WL = (percent_low / Transfer clock) x PCLK */
+	priv->iicb0wl = total_pclks * config->percent_low / 100;
+	if (priv->iicb0wl > (BIT(10) - 1))
+		return -EINVAL;
+
+	/* IICB0WH = ((percent_high / Transfer clock) x PCLK) - (tR + tF) */
+	priv->iicb0wh = total_pclks - priv->iicb0wl - trf_pclks;
+	if (priv->iicb0wh > (BIT(10) - 1))
+		return -EINVAL;
+
+	/*
+	 * Data hold time must be less than 0.9us in fast mode and
+	 * 3.45us in standard mode.
+	 * Data hold time = IICB0WL[9:2] / PCLK
+	 */
+	hold_time_ns = div64_ul((u64)(priv->iicb0wl >> 2) * NSEC_PER_SEC, pclk_hz);
+	if (hold_time_ns > config->min_hold_time_ns) {
+		dev_err(dev, "data hold time %dns is over %dns\n",
+			hold_time_ns, config->min_hold_time_ns);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void rzv2m_i2c_init(struct rzv2m_i2c_priv *priv)
+{
+	u32 i2c_ctl0;
+	u32 i2c_ctl1;
+
+	/* i2c disable */
+	writel(0, priv->base + IICB0CTL0);
+
+	/* IICB0CTL1 setting */
+	i2c_ctl1 = IICB0SLSE;
+	if (priv->bus_mode == RZV2M_I2C_400K)
+		i2c_ctl1 |= IICB0MDSC;
+	writel(i2c_ctl1, priv->base + IICB0CTL1);
+
+	/* IICB0WL IICB0WH setting */
+	writel(priv->iicb0wl, priv->base + IICB0WL);
+	writel(priv->iicb0wh, priv->base + IICB0WH);
+
+	/* i2c enable after setting */
+	i2c_ctl0 = IICB0SLWT | IICB0SLAC | IICB0IICE;
+	writel(i2c_ctl0, priv->base + IICB0CTL0);
+}
+
+static int rzv2m_i2c_write_with_ack(struct rzv2m_i2c_priv *priv, u32 data)
+{
+	unsigned long time_left;
+
+	reinit_completion(&priv->msg_tia_done);
+
+	writel(data, priv->base + IICB0DAT);
+
+	time_left = wait_for_completion_timeout(&priv->msg_tia_done,
+						priv->adap.timeout);
+	if (!time_left)
+		return -ETIMEDOUT;
+
+	/* Confirm ACK */
+	if ((readl(priv->base + IICB0STR0) & IICB0SSAC) != IICB0SSAC)
+		return -ENXIO;
+
+	return 0;
+}
+
+static int rzv2m_i2c_read_with_ack(struct rzv2m_i2c_priv *priv, u8 *data,
+				   bool last)
+{
+	unsigned long time_left;
+	u32 data_tmp;
+
+	reinit_completion(&priv->msg_tia_done);
+
+	/* Interrupt request timing : 8th clock */
+	bit_clrl(priv->base + IICB0CTL0, IICB0SLWT);
+
+	/* Exit the wait state */
+	writel(IICB0WRET, priv->base + IICB0TRG);
+
+	/* Wait for transaction */
+	time_left = wait_for_completion_timeout(&priv->msg_tia_done,
+						priv->adap.timeout);
+	if (!time_left)
+		return -ETIMEDOUT;
+
+	if (last) {
+		/* Disable ACK */
+		bit_clrl(priv->base + IICB0CTL0, IICB0SLAC);
+
+		/* Read data*/
+		data_tmp = readl(priv->base + IICB0DAT);
+
+		/* Interrupt request timing : 9th clock */
+		bit_setl(priv->base + IICB0CTL0, IICB0SLWT);
+
+		/* Exit the wait state */
+		writel(IICB0WRET, priv->base + IICB0TRG);
+
+		/* Wait for transaction */
+		time_left = wait_for_completion_timeout(&priv->msg_tia_done,
+							priv->adap.timeout);
+		if (!time_left)
+			return -ETIMEDOUT;
+
+		/* Enable ACK */
+		bit_setl(priv->base + IICB0CTL0, IICB0SLAC);
+	} else {
+		/* Read data */
+		data_tmp = readl(priv->base + IICB0DAT);
+	}
+
+	*data = data_tmp;
+
+	return 0;
+}
+
+static int rzv2m_i2c_send(struct rzv2m_i2c_priv *priv, struct i2c_msg *msg,
+			  unsigned int *count)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < msg->len; i++) {
+		ret = rzv2m_i2c_write_with_ack(priv, msg->buf[i]);
+		if (ret < 0)
+			return ret;
+	}
+	*count = i;
+
+	return 0;
+}
+
+static int rzv2m_i2c_receive(struct rzv2m_i2c_priv *priv, struct i2c_msg *msg,
+			     unsigned int *count)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < msg->len; i++) {
+		ret = rzv2m_i2c_read_with_ack(priv, &msg->buf[i],
+					      (msg->len - 1) == i);
+		if (ret < 0)
+			return ret;
+	}
+	*count = i;
+
+	return 0;
+}
+
+static int rzv2m_i2c_send_address(struct rzv2m_i2c_priv *priv,
+				  struct i2c_msg *msg)
+{
+	u32 addr;
+	int ret;
+
+	if (msg->flags & I2C_M_TEN) {
+		/*
+		 * 10-bit address
+		 *   addr_1: 5'b11110 | addr[9:8] | (R/nW)
+		 *   addr_2: addr[7:0]
+		 */
+		addr = 0xf0 | ((msg->addr & GENMASK(9, 8)) >> 7);
+		addr |= !!(msg->flags & I2C_M_RD);
+		/* Send 1st address(extend code) */
+		ret = rzv2m_i2c_write_with_ack(priv, addr);
+		if (ret)
+			return ret;
+
+		/* Send 2nd address */
+		ret = rzv2m_i2c_write_with_ack(priv, msg->addr & 0xff);
+	} else {
+		/* 7-bit address */
+		addr = i2c_8bit_addr_from_msg(msg);
+		ret = rzv2m_i2c_write_with_ack(priv, addr);
+	}
+
+	return ret;
+}
+
+static int rzv2m_i2c_stop_condition(struct rzv2m_i2c_priv *priv)
+{
+	u32 value;
+
+	/* Send stop condition */
+	writel(IICB0SPT, priv->base + IICB0TRG);
+	return readl_poll_timeout(priv->base + IICB0STR0,
+				  value, value & IICB0SSSP,
+				  100, jiffies_to_usecs(priv->adap.timeout));
+}
+
+static int rzv2m_i2c_master_xfer1(struct rzv2m_i2c_priv *priv,
+				  struct i2c_msg *msg, int stop)
+{
+	unsigned int count = 0;
+	int ret, read = !!(msg->flags & I2C_M_RD);
+
+	/* Send start condition */
+	writel(IICB0STT, priv->base + IICB0TRG);
+
+	ret = rzv2m_i2c_send_address(priv, msg);
+	if (!ret) {
+		if (read)
+			ret = rzv2m_i2c_receive(priv, msg, &count);
+		else
+			ret = rzv2m_i2c_send(priv, msg, &count);
+
+		if (!ret && stop)
+			ret = rzv2m_i2c_stop_condition(priv);
+	}
+
+	if (ret == -ENXIO)
+		rzv2m_i2c_stop_condition(priv);
+	else if (ret < 0)
+		rzv2m_i2c_init(priv);
+	else
+		ret = count;
+
+	return ret;
+}
+
+static int rzv2m_i2c_master_xfer(struct i2c_adapter *adap,
+				 struct i2c_msg *msgs, int num)
+{
+	struct rzv2m_i2c_priv *priv = i2c_get_adapdata(adap);
+	struct device *dev = priv->adap.dev.parent;
+	unsigned int i;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	if (readl(priv->base + IICB0STR0) & IICB0SSBS) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	/* I2C main transfer */
+	for (i = 0; i < num; i++) {
+		ret = rzv2m_i2c_master_xfer1(priv, &msgs[i], i == (num - 1));
+		if (ret < 0)
+			goto out;
+	}
+	ret = num;
+
+out:
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static u32 rzv2m_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+	       I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_adapter_quirks rzv2m_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
+};
+
+static struct i2c_algorithm rzv2m_i2c_algo = {
+	.master_xfer = rzv2m_i2c_master_xfer,
+	.functionality = rzv2m_i2c_func,
+};
+
+static int rzv2m_i2c_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rzv2m_i2c_priv *priv;
+	struct reset_control *rstc;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Can't get clock\n");
+
+	rstc = devm_reset_control_get_shared(dev, NULL);
+	if (IS_ERR(rstc))
+		return dev_err_probe(dev, PTR_ERR(rstc), "Missing reset ctrl\n");
+	/*
+	 * The reset also affects other HW that is not under the control
+	 * of Linux. Therefore, all we can do is deassert the reset.
+	 */
+	reset_control_deassert(rstc);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, rzv2m_i2c_tia_irq_handler, 0,
+			       dev_name(dev), priv);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Unable to request irq %d\n", irq);
+
+	adap = &priv->adap;
+	adap->nr = pdev->id;
+	adap->algo = &rzv2m_i2c_algo;
+	adap->quirks = &rzv2m_i2c_quirks;
+	adap->class = I2C_CLASS_DEPRECATED;
+	adap->dev.parent = dev;
+	adap->owner = THIS_MODULE;
+	device_set_node(&adap->dev, dev_fwnode(dev));
+	i2c_set_adapdata(adap, priv);
+	strscpy(adap->name, pdev->name, sizeof(adap->name));
+	init_completion(&priv->msg_tia_done);
+
+	ret = rzv2m_i2c_clock_calculate(dev, priv);
+	if (ret < 0)
+		return ret;
+
+	pm_runtime_enable(dev);
+
+	pm_runtime_get_sync(dev);
+	rzv2m_i2c_init(priv);
+	pm_runtime_put(dev);
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret < 0)
+		pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int rzv2m_i2c_remove(struct platform_device *pdev)
+{
+	struct rzv2m_i2c_priv *priv = platform_get_drvdata(pdev);
+	struct device *dev = priv->adap.dev.parent;
+
+	i2c_del_adapter(&priv->adap);
+	bit_clrl(priv->base + IICB0CTL0, IICB0IICE);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static int rzv2m_i2c_suspend(struct device *dev)
+{
+	struct rzv2m_i2c_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	bit_clrl(priv->base + IICB0CTL0, IICB0IICE);
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int rzv2m_i2c_resume(struct device *dev)
+{
+	struct rzv2m_i2c_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = rzv2m_i2c_clock_calculate(dev, priv);
+	if (ret < 0)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	rzv2m_i2c_init(priv);
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static const struct of_device_id rzv2m_i2c_ids[] = {
+	{ .compatible = "renesas,rzv2m-i2c" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rzv2m_i2c_ids);
+
+static const struct dev_pm_ops rzv2m_i2c_pm_ops = {
+	SYSTEM_SLEEP_PM_OPS(rzv2m_i2c_suspend, rzv2m_i2c_resume)
+};
+
+static struct platform_driver rzv2m_i2c_driver = {
+	.driver = {
+		.name = "rzv2m-i2c",
+		.of_match_table = rzv2m_i2c_ids,
+		.pm = pm_sleep_ptr(&rzv2m_i2c_pm_ops),
+	},
+	.probe	= rzv2m_i2c_probe,
+	.remove	= rzv2m_i2c_remove,
+};
+module_platform_driver(rzv2m_i2c_driver);
+
+MODULE_DESCRIPTION("RZ/V2M I2C bus driver");
+MODULE_AUTHOR("Renesas Electronics Corporation");
+MODULE_LICENSE("GPL");