@@ -298,6 +298,48 @@ struct phy_device *of_phy_connect(struct net_device *dev,
}
EXPORT_SYMBOL(of_phy_connect);
+/**
+ * of_phy_connect_with_host_params
+ * - Connect to the phy described in the device tree with host parameters
+ * @dev: pointer to net_device claiming the phy
+ * @phy_np: Pointer to device tree node for the PHY
+ * @hndlr: Link state callback for the network device
+ * @flags: flags to pass to the PHY
+ * @iface: PHY data interface type
+ * @host_interfaces: PHY data interface type by host
+ * @host_speed: PHY data interface speed by host
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure. The
+ * refcount must be dropped by calling phy_disconnect() or phy_detach().
+ */
+struct phy_device *
+of_phy_connect_with_host_params(struct net_device *dev,
+ struct device_node *phy_np,
+ void (*hndlr)(struct net_device *), u32 flags,
+ phy_interface_t iface,
+ unsigned long *host_interfaces,
+ int host_speed)
+{
+ struct phy_device *phy = of_phy_find_device(phy_np);
+ int ret;
+
+ if (!phy)
+ return NULL;
+
+ phy->dev_flags |= flags;
+ phy_interface_copy(phy->host_interfaces, host_interfaces);
+ phy->host_speed = host_speed;
+
+ ret = phy_connect_direct(dev, phy, hndlr, iface);
+
+ /* refcount is held by phy_connect_direct() on success */
+ put_device(&phy->mdio.dev);
+
+ return ret ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect_with_host_params);
+
/**
* of_phy_get_and_connect
* - Get phy node and connect to the phy described in the device tree
@@ -24,6 +24,13 @@ of_phy_connect(struct net_device *dev, struct device_node *phy_np,
void (*hndlr)(struct net_device *), u32 flags,
phy_interface_t iface);
struct phy_device *
+of_phy_connect_with_host_params(struct net_device *dev,
+ struct device_node *phy_np,
+ void (*hndlr)(struct net_device *), u32 flags,
+ phy_interface_t iface,
+ unsigned long *host_interfaces,
+ int host_speed);
+struct phy_device *
of_phy_get_and_connect(struct net_device *dev, struct device_node *np,
void (*hndlr)(struct net_device *));
@@ -185,6 +185,12 @@ static inline void phy_interface_or(unsigned long *dst, const unsigned long *a,
bitmap_or(dst, a, b, PHY_INTERFACE_MODE_MAX);
}
+static inline void phy_interface_copy(unsigned long *dst,
+ const unsigned long *src)
+{
+ bitmap_copy(dst, src, PHY_INTERFACE_MODE_MAX);
+}
+
static inline void phy_interface_set_rgmii(unsigned long *intf)
{
__set_bit(PHY_INTERFACE_MODE_RGMII, intf);
@@ -675,6 +681,8 @@ struct phy_device {
/* Host supported PHY interface types. Should be ignored if empty. */
DECLARE_PHY_INTERFACE_MASK(host_interfaces);
+ int host_speed;
+
/* Energy efficient ethernet modes which should be prohibited */
u32 eee_broken_modes;
To set host parameters from an ethernet driver, add a new function of_phy_connect_with_host_param(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/net/mdio/of_mdio.c | 42 ++++++++++++++++++++++++++++++++++++++ include/linux/of_mdio.h | 7 +++++++ include/linux/phy.h | 8 ++++++++ 3 files changed, 57 insertions(+)