@@ -204,6 +204,17 @@ config USB_RENESAS_USB3
dynamically linked module called "renesas_usb3" and force all
gadget drivers to also be dynamically linked.
+config USB_RENESAS_USBF
+ tristate 'Renesas USB Function controller'
+ depends on ARCH_RENESAS || COMPILE_TEST
+ help
+ Renesas USB Function controller is a USB peripheral controller
+ available on RZ/N1 Renesas SoCs.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "renesas_usbf" and force all
+ gadget drivers to also be dynamically linked.
+
config USB_PXA27X
tristate "PXA 27x"
depends on HAS_IOMEM
@@ -27,6 +27,7 @@ obj-$(CONFIG_USB_TEGRA_XUDC) += tegra-xudc.o
obj-$(CONFIG_USB_M66592) += m66592-udc.o
obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o
obj-$(CONFIG_USB_RENESAS_USB3) += renesas_usb3.o
+obj-$(CONFIG_USB_RENESAS_USBF) += renesas_usbf.o
obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o
obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o
obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o
new file mode 100644
@@ -0,0 +1,3420 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas USBF USB Function driver
+ *
+ * Copyright 2022 Schneider Electric
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/kfifo.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/role.h>
+
+#ifdef DEBUG
+#define TRACE(_fmt, ...) trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__)
+#define USBF_TRACE_EP_MASK 0x0ffff /* All the 16 endpoints */
+#define TRACEEP(_ep, _fmt, ...) \
+ do { \
+ if ((1 << (_ep)->id) & USBF_TRACE_EP_MASK) \
+ trace_printk("%s: " _fmt, __func__, ##__VA_ARGS__); \
+ } while (0)
+#else
+#define TRACE(_fmt, ...) do { } while (0)
+#define TRACEEP(_ep, _fmt, ...) do { } while (0)
+#endif
+
+#define USBF_NUM_ENDPOINTS 16
+#define USBF_EP0_MAX_PCKT_SIZE 64
+
+/* EPC registers */
+#define USBF_REG_USB_CONTROL 0x000
+#define USBF_USB_PUE2 BIT(2)
+#define USBF_USB_CONNECTB BIT(3)
+#define USBF_USB_DEFAULT BIT(4)
+#define USBF_USB_CONF BIT(5)
+#define USBF_USB_SUSPEND BIT(6)
+#define USBF_USB_RSUM_IN BIT(7)
+#define USBF_USB_SOF_RCV BIT(8)
+#define USBF_USB_FORCEFS BIT(9)
+#define USBF_USB_INT_SEL BIT(10)
+#define USBF_USB_SOF_CLK_MODE BIT(11)
+
+#define USBF_REG_USB_STATUS 0x004
+#define USBF_USB_RSUM_OUT BIT(1)
+#define USBF_USB_SPND_OUT BIT(2)
+#define USBF_USB_USB_RST BIT(3)
+#define USBF_USB_DEFAULT_ST BIT(4)
+#define USBF_USB_CONF_ST BIT(5)
+#define USBF_USB_SPEED_MODE BIT(6)
+#define USBF_USB_SOF_DELAY_STATUS BIT(31)
+
+#define USBF_REG_USB_ADDRESS 0x008
+#define USBF_USB_SOF_STATUS BIT(15)
+#define USBF_USB_SET_USB_ADDR(_a) ((_a) << 16)
+#define USBF_USB_GET_FRAME(_r) ((_r) & 0x7FF)
+
+#define USBF_REG_SETUP_DATA0 0x018
+#define USBF_REG_SETUP_DATA1 0x01C
+#define USBF_REG_USB_INT_STA 0x020
+#define USBF_USB_RSUM_INT BIT(1)
+#define USBF_USB_SPND_INT BIT(2)
+#define USBF_USB_USB_RST_INT BIT(3)
+#define USBF_USB_SOF_INT BIT(4)
+#define USBF_USB_SOF_ERROR_INT BIT(5)
+#define USBF_USB_SPEED_MODE_INT BIT(6)
+#define USBF_USB_EPN_INT(_n) (BIT(8) << (_n)) /* n=0..15 */
+
+#define USBF_REG_USB_INT_ENA 0x024
+#define USBF_USB_RSUM_EN BIT(1)
+#define USBF_USB_SPND_EN BIT(2)
+#define USBF_USB_USB_RST_EN BIT(3)
+#define USBF_USB_SOF_EN BIT(4)
+#define USBF_USB_SOF_ERROR_EN BIT(5)
+#define USBF_USB_SPEED_MODE_EN BIT(6)
+#define USBF_USB_EPN_EN(_n) (BIT(8) << (_n)) /* n=0..15 */
+
+#define USBF_BASE_EP0 0x028
+/* EP0 registers offsets from Base + USBF_BASE_EP0 (EP0 regs area) */
+#define USBF_REG_EP0_CONTROL 0x00
+#define USBF_EP0_ONAK BIT(0)
+#define USBF_EP0_INAK BIT(1)
+#define USBF_EP0_STL BIT(2)
+#define USBF_EP0_PERR_NAK_CLR BIT(3)
+#define USBF_EP0_INAK_EN BIT(4)
+#define USBF_EP0_DW_MASK (0x3 << 5)
+#define USBF_EP0_DW(_s) ((_s) << 5)
+#define USBF_EP0_DEND BIT(7)
+#define USBF_EP0_BCLR BIT(8)
+#define USBF_EP0_PIDCLR BIT(9)
+#define USBF_EP0_AUTO BIT(16)
+#define USBF_EP0_OVERSEL BIT(17)
+#define USBF_EP0_STGSEL BIT(18)
+
+#define USBF_REG_EP0_STATUS 0x04
+#define USBF_EP0_SETUP_INT BIT(0)
+#define USBF_EP0_STG_START_INT BIT(1)
+#define USBF_EP0_STG_END_INT BIT(2)
+#define USBF_EP0_STALL_INT BIT(3)
+#define USBF_EP0_IN_INT BIT(4)
+#define USBF_EP0_OUT_INT BIT(5)
+#define USBF_EP0_OUT_OR_INT BIT(6)
+#define USBF_EP0_OUT_NULL_INT BIT(7)
+#define USBF_EP0_IN_EMPTY BIT(8)
+#define USBF_EP0_IN_FULL BIT(9)
+#define USBF_EP0_IN_DATA BIT(10)
+#define USBF_EP0_IN_NAK_INT BIT(11)
+#define USBF_EP0_OUT_EMPTY BIT(12)
+#define USBF_EP0_OUT_FULL BIT(13)
+#define USBF_EP0_OUT_NULL BIT(14)
+#define USBF_EP0_OUT_NAK_INT BIT(15)
+#define USBF_EP0_PERR_NAK_INT BIT(16)
+#define USBF_EP0_PERR_NAK BIT(17)
+#define USBF_EP0_PID BIT(18)
+
+#define USBF_REG_EP0_INT_ENA 0x08
+#define USBF_EP0_SETUP_EN BIT(0)
+#define USBF_EP0_STG_START_EN BIT(1)
+#define USBF_EP0_STG_END_EN BIT(2)
+#define USBF_EP0_STALL_EN BIT(3)
+#define USBF_EP0_IN_EN BIT(4)
+#define USBF_EP0_OUT_EN BIT(5)
+#define USBF_EP0_OUT_OR_EN BIT(6)
+#define USBF_EP0_OUT_NULL_EN BIT(7)
+#define USBF_EP0_IN_NAK_EN BIT(11)
+#define USBF_EP0_OUT_NAK_EN BIT(15)
+#define USBF_EP0_PERR_NAK_EN BIT(16)
+
+#define USBF_REG_EP0_LENGTH 0x0C
+#define USBF_EP0_LDATA (0x7FF << 0)
+#define USBF_REG_EP0_READ 0x10
+#define USBF_REG_EP0_WRITE 0x14
+
+#define USBF_BASE_EPN(_n) (0x040 + (_n) * 0x020)
+/* EPn registers offsets from Base + USBF_BASE_EPN(n-1). n=1..15 */
+#define USBF_REG_EPN_CONTROL 0x000
+#define USBF_EPN_ONAK BIT(0)
+#define USBF_EPN_OSTL BIT(2)
+#define USBF_EPN_ISTL BIT(3)
+#define USBF_EPN_OSTL_EN BIT(4)
+#define USBF_EPN_DW_MASK (0x3 << 5)
+#define USBF_EPN_DW(_s) ((_s) << 5)
+#define USBF_EPN_DEND BIT(7)
+#define USBF_EPN_CBCLR BIT(8)
+#define USBF_EPN_BCLR BIT(9)
+#define USBF_EPN_OPIDCLR BIT(10)
+#define USBF_EPN_IPIDCLR BIT(11)
+#define USBF_EPN_AUTO BIT(16)
+#define USBF_EPN_OVERSEL BIT(17)
+#define USBF_EPN_MODE_MASK (0x3 << 24)
+#define USBF_EPN_MODE_BULK (0x0 << 24)
+#define USBF_EPN_MODE_INTR (0x1 << 24)
+#define USBF_EPN_MODE_ISO (0x2 << 24)
+#define USBF_EPN_DIR0 BIT(26)
+#define USBF_EPN_BUF_TYPE_DOUBLE BIT(30)
+#define USBF_EPN_EN BIT(31)
+
+#define USBF_REG_EPN_STATUS 0x004
+#define USBF_EPN_IN_EMPTY BIT(0)
+#define USBF_EPN_IN_FULL BIT(1)
+#define USBF_EPN_IN_DATA BIT(2)
+#define USBF_EPN_IN_INT BIT(3)
+#define USBF_EPN_IN_STALL_INT BIT(4)
+#define USBF_EPN_IN_NAK_ERR_INT BIT(5)
+#define USBF_EPN_IN_END_INT BIT(7)
+#define USBF_EPN_IPID BIT(10)
+#define USBF_EPN_OUT_EMPTY BIT(16)
+#define USBF_EPN_OUT_FULL BIT(17)
+#define USBF_EPN_OUT_NULL_INT BIT(18)
+#define USBF_EPN_OUT_INT BIT(19)
+#define USBF_EPN_OUT_STALL_INT BIT(20)
+#define USBF_EPN_OUT_NAK_ERR_INT BIT(21)
+#define USBF_EPN_OUT_OR_INT BIT(22)
+#define USBF_EPN_OUT_END_INT BIT(23)
+#define USBF_EPN_ISO_CRC BIT(24)
+#define USBF_EPN_ISO_OR BIT(26)
+#define USBF_EPN_OUT_NOTKN BIT(27)
+#define USBF_EPN_ISO_OPID BIT(28)
+#define USBF_EPN_ISO_PIDERR BIT(29)
+
+#define USBF_REG_EPN_INT_ENA 0x008
+#define USBF_EPN_IN_EN BIT(3)
+#define USBF_EPN_IN_STALL_EN BIT(4)
+#define USBF_EPN_IN_NAK_ERR_EN BIT(5)
+#define USBF_EPN_IN_END_EN BIT(7)
+#define USBF_EPN_OUT_NULL_EN BIT(18)
+#define USBF_EPN_OUT_EN BIT(19)
+#define USBF_EPN_OUT_STALL_EN BIT(20)
+#define USBF_EPN_OUT_NAK_ERR_EN BIT(21)
+#define USBF_EPN_OUT_OR_EN BIT(22)
+#define USBF_EPN_OUT_END_EN BIT(23)
+
+#define USBF_REG_EPN_DMA_CTRL 0x00C
+#define USBF_EPN_DMAMODE0 BIT(0)
+#define USBF_EPN_DMA_EN BIT(4)
+#define USBF_EPN_STOP_SET BIT(8)
+#define USBF_EPN_BURST_SET BIT(9)
+#define USBF_EPN_DEND_SET BIT(10)
+#define USBF_EPN_STOP_MODE BIT(11)
+
+#define USBF_REG_EPN_PCKT_ADRS 0x010
+#define USBF_EPN_MPKT(_l) ((_l) << 0)
+#define USBF_EPN_BASEAD(_a) ((_a) << 16)
+
+#define USBF_REG_EPN_LEN_DCNT 0x014
+#define USBF_EPN_GET_LDATA(_r) ((_r) & 0x7FF)
+#define USBF_EPN_SET_DMACNT(_c) ((_c) << 16)
+#define USBF_EPN_GET_DMACNT(_r) (((_r) >> 16) & 0x1ff)
+
+#define USBF_REG_EPN_READ 0x018
+#define USBF_REG_EPN_WRITE 0x01C
+
+/* AHB-EPC Bridge registers */
+#define USBF_REG_AHBSCTR 0x1000
+#define USBF_REG_AHBMCTR 0x1004
+#define USBF_SYS_WBURST_TYPE BIT(2)
+#define USBF_SYS_ARBITER_CTR BIT(31)
+
+#define USBF_REG_AHBBINT 0x1008
+#define USBF_SYS_ERR_MASTER (0x0F << 0)
+#define USBF_SYS_SBUS_ERRINT0 BIT(4)
+#define USBF_SYS_SBUS_ERRINT1 BIT(5)
+#define USBF_SYS_MBUS_ERRINT BIT(6)
+#define USBF_SYS_VBUS_INT BIT(13)
+#define USBF_SYS_DMA_ENDINT_EPN(_n) (BIT(16) << (_n)) /* _n=1..15 */
+
+#define USBF_REG_AHBBINTEN 0x100C
+#define USBF_SYS_SBUS_ERRINT0EN BIT(4)
+#define USBF_SYS_SBUS_ERRINT1EN BIT(5)
+#define USBF_SYS_MBUS_ERRINTEN BIT(6)
+#define USBF_SYS_VBUS_INTEN BIT(13)
+#define USBF_SYS_DMA_ENDINTEN_EPN(_n) (BIT(16) << (_n)) /* _n=1..15 */
+
+#define USBF_REG_EPCTR 0x1010
+#define USBF_SYS_EPC_RST BIT(0)
+#define USBF_SYS_PLL_RST BIT(2)
+#define USBF_SYS_PLL_LOCK BIT(4)
+#define USBF_SYS_PLL_RESUME BIT(5)
+#define USBF_SYS_VBUS_LEVEL BIT(8)
+#define USBF_SYS_DIRPD BIT(12)
+
+#define USBF_REG_USBSSVER 0x1020
+#define USBF_REG_USBSSCONF 0x1024
+#define USBF_SYS_DMA_AVAILABLE(_n) (BIT(0) << (_n)) /* _n=0..15 */
+#define USBF_SYS_EP_AVAILABLE(_n) (BIT(16) << (_n)) /* _n=0..15 */
+
+#define USBF_BASE_DMA_EPN(_n) (0x1110 + (_n) * 0x010)
+/* EPn DMA registers offsets from Base USBF_BASE_DMA_EPN(n-1). n=1..15*/
+#define USBF_REG_DMA_EPN_DCR1 0x00
+#define USBF_SYS_EPN_REQEN BIT(0)
+#define USBF_SYS_EPN_DIR0 BIT(1)
+#define USBF_SYS_EPN_SET_DMACNT(_c) ((_c) << 16)
+#define USBF_SYS_EPN_GET_DMACNT(_r) (((_r) >> 16) & 0x0FF)
+
+#define USBF_REG_DMA_EPN_DCR2 0x04
+#define USBF_SYS_EPN_MPKT(_s) ((_s) << 0)
+#define USBF_SYS_EPN_LMPKT(_l) ((_l) << 16)
+
+#define USBF_REG_DMA_EPN_TADR 0x08
+
+/* USB request */
+struct usbf_req {
+ struct usb_request req;
+ struct list_head queue;
+ unsigned int is_zero_sent : 1;
+ unsigned int is_mapped : 1;
+ enum {
+ USBF_XFER_START,
+ USBF_XFER_WAIT_DMA,
+ USBF_XFER_SEND_NULL,
+ USBF_XFER_WAIT_END,
+ USBF_XFER_WAIT_DMA_SHORT,
+ USBF_XFER_WAIT_BRIDGE,
+ } xfer_step;
+ size_t dma_size;
+};
+
+/* USB Endpoint */
+struct usbf_ep {
+ struct usb_ep ep;
+ char name[32];
+ struct list_head queue;
+ unsigned int is_processing : 1;
+ unsigned int is_in : 1;
+ struct usbf_udc *udc;
+ void __iomem *regs;
+ void __iomem *dma_regs;
+ unsigned int id : 8;
+ unsigned int disabled : 1;
+ unsigned int is_wedged : 1;
+ unsigned int delayed_status : 1;
+ u32 status;
+ void (*bridge_on_dma_end)(struct usbf_ep *ep);
+};
+
+enum usbf_ep0state {
+ EP0_IDLE,
+ EP0_IN_DATA_PHASE,
+ EP0_OUT_DATA_PHASE,
+ EP0_OUT_STATUS_START_PHASE,
+ EP0_OUT_STATUS_PHASE,
+ EP0_OUT_STATUS_END_PHASE,
+ EP0_IN_STATUS_START_PHASE,
+ EP0_IN_STATUS_PHASE,
+ EP0_IN_STATUS_END_PHASE,
+};
+
+struct usbf_udc {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct device *dev;
+ void __iomem *regs;
+ spinlock_t lock;
+ bool is_remote_wakeup;
+ bool is_usb_suspended;
+ struct usbf_ep ep[USBF_NUM_ENDPOINTS];
+ /* for EP0 control messages */
+ enum usbf_ep0state ep0state;
+ struct usbf_req setup_reply;
+ u8 ep0_buf[USBF_EP0_MAX_PCKT_SIZE];
+};
+
+struct usbf_ep_info {
+ const char *name;
+ struct usb_ep_caps caps;
+ u16 base_addr;
+ unsigned int is_double : 1;
+ u16 maxpacket_limit;
+};
+
+#define USBF_SINGLE_BUFFER 0
+#define USBF_DOUBLE_BUFFER 1
+#define USBF_EP_INFO(_name, _caps, _base_addr, _is_double, _maxpacket_limit) \
+ { \
+ .name = _name, \
+ .caps = _caps, \
+ .base_addr = _base_addr, \
+ .is_double = _is_double, \
+ .maxpacket_limit = _maxpacket_limit, \
+ }
+
+/* This table is computed from the recommended values provided in the SOC
+ * datasheet. The buffer type (single/double) and the endpoint type cannot
+ * be changed. The mapping in internal RAM (base_addr and number of words)
+ * for each endpoints depends on the max packet size and the buffer type.
+ */
+static const struct usbf_ep_info usbf_ep_info[USBF_NUM_ENDPOINTS] = {
+ /* ep0: buf @0x0000 64 bytes, fixed 32 words */
+ [0] = USBF_EP_INFO("ep0-ctrl",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0000, USBF_SINGLE_BUFFER, USBF_EP0_MAX_PCKT_SIZE),
+ /* ep1: buf @0x0020, 2 buffers 512 bytes -> (512 * 2 / 4) words */
+ [1] = USBF_EP_INFO("ep1-bulk",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0020, USBF_DOUBLE_BUFFER, 512),
+ /* ep2: buf @0x0120, 2 buffers 512 bytes -> (512 * 2 / 4) words */
+ [2] = USBF_EP_INFO("ep2-bulk",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0120, USBF_DOUBLE_BUFFER, 512),
+ /* ep3: buf @0x0220, 1 buffer 512 bytes -> (512 * 2 / 4) words */
+ [3] = USBF_EP_INFO("ep3-bulk",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0220, USBF_SINGLE_BUFFER, 512),
+ /* ep4: buf @0x02A0, 1 buffer 512 bytes -> (512 * 1 / 4) words */
+ [4] = USBF_EP_INFO("ep4-bulk",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
+ 0x02A0, USBF_SINGLE_BUFFER, 512),
+ /* ep5: buf @0x0320, 1 buffer 512 bytes -> (512 * 2 / 4) words */
+ [5] = USBF_EP_INFO("ep5-bulk",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0320, USBF_SINGLE_BUFFER, 512),
+ /* ep6: buf @0x03A0, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+ [6] = USBF_EP_INFO("ep6-int",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
+ 0x03A0, USBF_SINGLE_BUFFER, 1024),
+ /* ep7: buf @0x04A0, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+ [7] = USBF_EP_INFO("ep7-int",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
+ 0x04A0, USBF_SINGLE_BUFFER, 1024),
+ /* ep8: buf @0x0520, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+ [8] = USBF_EP_INFO("ep8-int",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0520, USBF_SINGLE_BUFFER, 1024),
+ /* ep9: buf @0x0620, 1 buffer 1024 bytes -> (1024 * 1 / 4) words */
+ [9] = USBF_EP_INFO("ep9-int",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_INT,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0620, USBF_SINGLE_BUFFER, 1024),
+ /* ep10: buf @0x0720, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+ [10] = USBF_EP_INFO("ep10-iso",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0720, USBF_DOUBLE_BUFFER, 1024),
+ /* ep11: buf @0x0920, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+ [11] = USBF_EP_INFO("ep11-iso",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0920, USBF_DOUBLE_BUFFER, 1024),
+ /* ep12: buf @0x0B20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+ [12] = USBF_EP_INFO("ep12-iso",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0B20, USBF_DOUBLE_BUFFER, 1024),
+ /* ep13: buf @0x0D20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+ [13] = USBF_EP_INFO("ep13-iso",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0D20, USBF_DOUBLE_BUFFER, 1024),
+ /* ep14: buf @0x0F20, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+ [14] = USBF_EP_INFO("ep14-iso",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
+ 0x0F20, USBF_DOUBLE_BUFFER, 1024),
+ /* ep15: buf @0x1120, 2 buffers 1024 bytes -> (1024 * 2 / 4) words */
+ [15] = USBF_EP_INFO("ep15-iso",
+ USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO,
+ USB_EP_CAPS_DIR_ALL),
+ 0x1120, USBF_DOUBLE_BUFFER, 1024),
+};
+
+static inline u32 usbf_reg_readl(struct usbf_udc *udc, uint offset)
+{
+ return readl(udc->regs + offset);
+}
+
+static inline void usbf_reg_writel(struct usbf_udc *udc, uint offset, u32 val)
+{
+ writel(val, udc->regs + offset);
+}
+
+static inline void usbf_reg_bitset(struct usbf_udc *udc, uint offset, u32 set)
+{
+ u32 tmp;
+
+ tmp = usbf_reg_readl(udc, offset);
+ tmp |= set;
+ usbf_reg_writel(udc, offset, tmp);
+}
+
+static inline void usbf_reg_bitclr(struct usbf_udc *udc, uint offset, u32 clr)
+{
+ u32 tmp;
+
+ tmp = usbf_reg_readl(udc, offset);
+ tmp &= ~clr;
+ usbf_reg_writel(udc, offset, tmp);
+}
+
+static inline void usbf_reg_clrset(struct usbf_udc *udc, uint offset,
+ u32 clr, u32 set)
+{
+ u32 tmp;
+
+ tmp = usbf_reg_readl(udc, offset);
+ tmp &= ~clr;
+ tmp |= set;
+ usbf_reg_writel(udc, offset, tmp);
+}
+
+static inline u32 usbf_ep_reg_readl(struct usbf_ep *ep, uint offset)
+{
+ return readl(ep->regs + offset);
+}
+
+static inline void usbf_ep_reg_read_rep(struct usbf_ep *ep, uint offset,
+ void *dst, uint count)
+{
+ readsl(ep->regs + offset, dst, count);
+}
+
+static inline void usbf_ep_reg_writel(struct usbf_ep *ep, uint offset, u32 val)
+{
+ writel(val, ep->regs + offset);
+}
+
+static inline void usbf_ep_reg_write_rep(struct usbf_ep *ep, uint offset,
+ const void *src, uint count)
+{
+ writesl(ep->regs + offset, src, count);
+}
+
+static inline void usbf_ep_reg_bitset(struct usbf_ep *ep, uint offset, u32 set)
+{
+ u32 tmp;
+
+ tmp = usbf_ep_reg_readl(ep, offset);
+ tmp |= set;
+ usbf_ep_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_reg_bitclr(struct usbf_ep *ep, uint offset, u32 clr)
+{
+ u32 tmp;
+
+ tmp = usbf_ep_reg_readl(ep, offset);
+ tmp &= ~clr;
+ usbf_ep_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_reg_clrset(struct usbf_ep *ep, uint offset,
+ u32 clr, u32 set)
+{
+ u32 tmp;
+
+ tmp = usbf_ep_reg_readl(ep, offset);
+ tmp &= ~clr;
+ tmp |= set;
+ usbf_ep_reg_writel(ep, offset, tmp);
+}
+
+static inline u32 usbf_ep_dma_reg_readl(struct usbf_ep *ep, uint offset)
+{
+ return readl(ep->dma_regs + offset);
+}
+
+static inline void usbf_ep_dma_reg_writel(struct usbf_ep *ep, uint offset,
+ u32 val)
+{
+ writel(val, ep->dma_regs + offset);
+}
+
+static inline void usbf_ep_dma_reg_bitset(struct usbf_ep *ep, uint offset,
+ u32 set)
+{
+ u32 tmp;
+
+ tmp = usbf_ep_dma_reg_readl(ep, offset);
+ tmp |= set;
+ usbf_ep_dma_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_dma_reg_bitclr(struct usbf_ep *ep, uint offset,
+ u32 clr)
+{
+ u32 tmp;
+
+ tmp = usbf_ep_dma_reg_readl(ep, offset);
+ tmp &= ~clr;
+ usbf_ep_dma_reg_writel(ep, offset, tmp);
+}
+
+static inline void usbf_ep_dma_reg_clrset(struct usbf_ep *ep, uint offset,
+ u32 clr, u32 set)
+{
+ u32 tmp;
+
+ tmp = usbf_ep_dma_reg_readl(ep, offset);
+ tmp &= ~clr;
+ tmp |= set;
+ usbf_ep_dma_reg_writel(ep, offset, tmp);
+}
+
+static void usbf_ep0_send_null(struct usbf_ep *ep0, bool is_data1)
+{
+ u32 set;
+
+ set = USBF_EP0_DEND;
+ if (is_data1)
+ set |= USBF_EP0_PIDCLR;
+
+ usbf_ep_reg_bitset(ep0, USBF_REG_EP0_CONTROL, set);
+}
+
+static int usbf_ep0_pio_in(struct usbf_ep *ep0, struct usbf_req *req)
+{
+ unsigned int left;
+ unsigned int nb;
+ const void *buf;
+ u32 ctrl;
+ u32 last;
+
+ left = req->req.length - req->req.actual;
+
+ if (left == 0) {
+ if (!req->is_zero_sent) {
+ if (req->req.length == 0) {
+ TRACEEP(ep0, "send null\n");
+ usbf_ep0_send_null(ep0, false);
+ req->is_zero_sent = 1;
+ return -EINPROGRESS;
+ }
+ if ((req->req.actual % ep0->ep.maxpacket) == 0) {
+ if (req->req.zero) {
+ TRACEEP(ep0, "send null\n");
+ usbf_ep0_send_null(ep0, false);
+ req->is_zero_sent = 1;
+ return -EINPROGRESS;
+ }
+ }
+ }
+ return 0;
+ }
+
+ if (left > ep0->ep.maxpacket)
+ left = ep0->ep.maxpacket;
+
+ buf = req->req.buf;
+ buf += req->req.actual;
+
+ nb = left / sizeof(u32);
+ if (nb) {
+ usbf_ep_reg_write_rep(ep0, USBF_REG_EP0_WRITE, buf, nb);
+ buf += (nb * sizeof(u32));
+ req->req.actual += (nb * sizeof(u32));
+ left -= (nb * sizeof(u32));
+ }
+ ctrl = usbf_ep_reg_readl(ep0, USBF_REG_EP0_CONTROL);
+ ctrl &= ~USBF_EP0_DW_MASK;
+ if (left) {
+ memcpy(&last, buf, left);
+ usbf_ep_reg_writel(ep0, USBF_REG_EP0_WRITE, last);
+ ctrl |= USBF_EP0_DW(left);
+ req->req.actual += left;
+ }
+ usbf_ep_reg_writel(ep0, USBF_REG_EP0_CONTROL, ctrl | USBF_EP0_DEND);
+
+ TRACEEP(ep0, "send %u/%u\n", req->req.actual, req->req.length);
+
+ return -EINPROGRESS;
+}
+
+static int usbf_ep0_pio_out(struct usbf_ep *ep0, struct usbf_req *req)
+{
+ int req_status = 0;
+ unsigned int count;
+ unsigned int recv;
+ unsigned int left;
+ unsigned int nb;
+ void *buf;
+ u32 last;
+
+ if (ep0->status & USBF_EP0_OUT_INT) {
+ recv = usbf_ep_reg_readl(ep0, USBF_REG_EP0_LENGTH) & USBF_EP0_LDATA;
+ count = recv;
+
+ buf = req->req.buf;
+ buf += req->req.actual;
+
+ left = req->req.length - req->req.actual;
+
+ TRACEEP(ep0, "recv %u, left %u\n", count, left);
+
+ if (left > ep0->ep.maxpacket)
+ left = ep0->ep.maxpacket;
+
+ if (count > left) {
+ req_status = -EOVERFLOW;
+ count = left;
+ }
+
+ if (count) {
+ nb = count / sizeof(u32);
+ if (nb) {
+ usbf_ep_reg_read_rep(ep0, USBF_REG_EP0_READ,
+ buf, nb);
+ buf += (nb * sizeof(u32));
+ req->req.actual += (nb * sizeof(u32));
+ count -= (nb * sizeof(u32));
+ }
+ if (count) {
+ last = usbf_ep_reg_readl(ep0, USBF_REG_EP0_READ);
+ memcpy(buf, &last, count);
+ req->req.actual += count;
+ }
+ }
+ TRACEEP(ep0, "recv %u/%u\n", req->req.actual, req->req.length);
+
+ if (req_status) {
+ TRACEEP(ep0, "req.status=%d\n", req_status);
+ req->req.status = req_status;
+ return 0;
+ }
+
+ if (recv < ep0->ep.maxpacket) {
+ TRACEEP(ep0, "short packet\n");
+ /* This is a short packet -> It is the end */
+ req->req.status = 0;
+ return 0;
+ }
+
+ /* The Data stage of a control transfer from an endpoint to the
+ * host is complete when the endpoint does one of the following:
+ * - Has transferred exactly the expected amount of data
+ * - Transfers a packet with a payload size less than
+ * wMaxPacketSize or transfers a zero-length packet
+ */
+ if (req->req.actual == req->req.length) {
+ req->req.status = 0;
+ return 0;
+ }
+ }
+
+ if (ep0->status & USBF_EP0_OUT_NULL_INT) {
+ /* NULL packet received */
+ TRACEEP(ep0, "null packet\n");
+ if (req->req.actual != req->req.length) {
+ req->req.status = req->req.short_not_ok ?
+ -EREMOTEIO : 0;
+ } else {
+ req->req.status = 0;
+ }
+ return 0;
+ }
+
+ return -EINPROGRESS;
+}
+
+static void usbf_ep0_fifo_flush(struct usbf_ep *ep0)
+{
+ u32 sts;
+ int ret;
+
+ usbf_ep_reg_bitset(ep0, USBF_REG_EP0_CONTROL, USBF_EP0_BCLR);
+
+ ret = readl_poll_timeout_atomic(ep0->regs + USBF_REG_EP0_STATUS, sts,
+ (sts & (USBF_EP0_IN_DATA | USBF_EP0_IN_EMPTY)) == USBF_EP0_IN_EMPTY,
+ 0, 10000);
+ if (ret)
+ dev_err(ep0->udc->dev, "ep0 flush fifo timed out\n");
+
+}
+
+static void usbf_epn_send_null(struct usbf_ep *epn)
+{
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_DEND);
+}
+
+static void usbf_epn_send_residue(struct usbf_ep *epn, const void *buf,
+ unsigned int size)
+{
+ u32 tmp;
+
+ memcpy(&tmp, buf, size);
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_WRITE, tmp);
+
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_CONTROL,
+ USBF_EPN_DW_MASK,
+ USBF_EPN_DW(size) | USBF_EPN_DEND);
+}
+
+static int usbf_epn_pio_in(struct usbf_ep *epn, struct usbf_req *req)
+{
+ unsigned int left;
+ unsigned int nb;
+ const void *buf;
+
+ left = req->req.length - req->req.actual;
+
+ if (left == 0) {
+ if (!req->is_zero_sent) {
+ if (req->req.length == 0) {
+ TRACEEP(epn, "ep%u send_null\n", epn->id);
+ usbf_epn_send_null(epn);
+ req->is_zero_sent = 1;
+ return -EINPROGRESS;
+ }
+ if ((req->req.actual % epn->ep.maxpacket) == 0) {
+ if (req->req.zero) {
+ TRACEEP(epn, "ep%u send_null\n",
+ epn->id);
+ usbf_epn_send_null(epn);
+ req->is_zero_sent = 1;
+ return -EINPROGRESS;
+ }
+ }
+ }
+ return 0;
+ }
+
+ if (left > epn->ep.maxpacket)
+ left = epn->ep.maxpacket;
+
+ buf = req->req.buf;
+ buf += req->req.actual;
+
+ nb = left / sizeof(u32);
+ if (nb) {
+ usbf_ep_reg_write_rep(epn, USBF_REG_EPN_WRITE, buf, nb);
+ buf += (nb * sizeof(u32));
+ req->req.actual += (nb * sizeof(u32));
+ left -= (nb * sizeof(u32));
+ }
+
+ if (left) {
+ usbf_epn_send_residue(epn, buf, left);
+ req->req.actual += left;
+ } else {
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_CONTROL,
+ USBF_EPN_DW_MASK,
+ USBF_EPN_DEND);
+ }
+
+ TRACEEP(epn, "ep%u send %u/%u\n", epn->id, req->req.actual,
+ req->req.length);
+
+ return -EINPROGRESS;
+}
+
+static void usbf_epn_enable_in_end_int(struct usbf_ep *epn)
+{
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_IN_END_EN);
+}
+
+static int usbf_epn_dma_in(struct usbf_ep *epn, struct usbf_req *req)
+{
+ unsigned int left;
+ u32 npkt;
+ u32 lastpkt;
+ int ret;
+
+ if (!IS_ALIGNED((uintptr_t)req->req.buf, 4)) {
+ TRACEEP(epn, "ep%u buf unaligned -> fallback pio\n", epn->id);
+ return usbf_epn_pio_in(epn, req);
+ }
+
+ left = req->req.length - req->req.actual;
+
+ switch (req->xfer_step) {
+ default:
+ case USBF_XFER_START:
+ if (left == 0) {
+ TRACEEP(epn, "ep%u send null\n", epn->id);
+ usbf_epn_send_null(epn);
+ req->xfer_step = USBF_XFER_WAIT_END;
+ break;
+ }
+ if (left < 4) {
+ TRACEEP(epn, "ep%u send residue %u\n", epn->id, left);
+ usbf_epn_send_residue(epn,
+ req->req.buf + req->req.actual, left);
+ req->req.actual += left;
+ req->xfer_step = USBF_XFER_WAIT_END;
+ break;
+ }
+
+ ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 1);
+ if (ret < 0) {
+ dev_err(epn->udc->dev, "usb_gadget_map_request failed (%d)\n",
+ ret);
+ return ret;
+ }
+ req->is_mapped = 1;
+
+ npkt = DIV_ROUND_UP(left, epn->ep.maxpacket);
+ lastpkt = (left % epn->ep.maxpacket);
+ if (lastpkt == 0)
+ lastpkt = epn->ep.maxpacket;
+ lastpkt &= ~0x3; /* DMA is done on 32bit units */
+
+ usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR2,
+ USBF_SYS_EPN_MPKT(epn->ep.maxpacket) | USBF_SYS_EPN_LMPKT(lastpkt));
+ usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_TADR,
+ req->req.dma);
+ usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1,
+ USBF_SYS_EPN_SET_DMACNT(npkt));
+ usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1,
+ USBF_SYS_EPN_REQEN);
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT, USBF_EPN_SET_DMACNT(npkt));
+
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
+
+ /* The end of DMA transfer at the USBF level needs to be handle
+ * after the detection of the end of DMA transfer at the brige
+ * level.
+ * To force this sequence, EPN_IN_END_EN will be set by the
+ * detection of the end of transfer at bridge level (ie. bridge
+ * interrupt).
+ */
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_IN_EN | USBF_EPN_IN_END_EN);
+ epn->bridge_on_dma_end = usbf_epn_enable_in_end_int;
+
+ /* Clear any pending IN_END interrupt */
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(u32)USBF_EPN_IN_END_INT);
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL,
+ USBF_EPN_BURST_SET | USBF_EPN_DMAMODE0);
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL,
+ USBF_EPN_DMA_EN);
+
+ req->dma_size = (npkt - 1) * epn->ep.maxpacket + lastpkt;
+
+ TRACEEP(epn, "ep%u dma xfer %zu\n", epn->id, req->dma_size);
+
+ req->xfer_step = USBF_XFER_WAIT_DMA;
+ break;
+
+ case USBF_XFER_WAIT_DMA:
+ if (!(epn->status & USBF_EPN_IN_END_INT)) {
+ TRACEEP(epn, "ep%u dma not done\n", epn->id);
+ break;
+ }
+ TRACEEP(epn, "ep%u dma done\n", epn->id);
+
+ usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 1);
+ req->is_mapped = 0;
+
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
+
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_IN_END_EN,
+ USBF_EPN_IN_EN);
+
+ req->req.actual += req->dma_size;
+
+ left = req->req.length - req->req.actual;
+ if (left) {
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(u32)USBF_EPN_IN_INT);
+
+ TRACEEP(epn, "ep%u send residue %u\n", epn->id, left);
+ usbf_epn_send_residue(epn,
+ req->req.buf + req->req.actual, left);
+ req->req.actual += left;
+ req->xfer_step = USBF_XFER_WAIT_END;
+ break;
+ }
+
+ if (req->req.actual % epn->ep.maxpacket) {
+ /* last packet was a short packet. Tell the hardware to
+ * send it right now.
+ */
+ TRACEEP(epn, "ep%u send short\n", epn->id);
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+ ~(u32)USBF_EPN_IN_INT);
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL,
+ USBF_EPN_DEND);
+
+ req->xfer_step = USBF_XFER_WAIT_END;
+ break;
+ }
+
+ /* Last packet size was a maxpacket size
+ * Send null packet if needed
+ */
+ if (req->req.zero) {
+ req->xfer_step = USBF_XFER_SEND_NULL;
+ break;
+ }
+
+ /* No more action to do. Wait for the end of the USB transfer */
+ req->xfer_step = USBF_XFER_WAIT_END;
+ break;
+
+ case USBF_XFER_SEND_NULL:
+ TRACEEP(epn, "ep%u send null\n", epn->id);
+ usbf_epn_send_null(epn);
+ req->xfer_step = USBF_XFER_WAIT_END;
+ break;
+
+ case USBF_XFER_WAIT_END:
+ if (!(epn->status & USBF_EPN_IN_INT)) {
+ TRACEEP(epn, "ep%u end not done\n", epn->id);
+ break;
+ }
+ TRACEEP(epn, "ep%u send done %u/%u\n", epn->id,
+ req->req.actual, req->req.length);
+ req->xfer_step = USBF_XFER_START;
+ return 0;
+ }
+
+ return -EINPROGRESS;
+}
+
+static void usbf_epn_recv_residue(struct usbf_ep *epn, void *buf,
+ unsigned int size)
+{
+ u32 last;
+
+ last = usbf_ep_reg_readl(epn, USBF_REG_EPN_READ);
+ memcpy(buf, &last, size);
+}
+
+static int usbf_epn_pio_out(struct usbf_ep *epn, struct usbf_req *req)
+{
+ int req_status = 0;
+ unsigned int count;
+ unsigned int recv;
+ unsigned int left;
+ unsigned int nb;
+ void *buf;
+
+ if (epn->status & USBF_EPN_OUT_INT) {
+ recv = USBF_EPN_GET_LDATA(
+ usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+ count = recv;
+
+ buf = req->req.buf;
+ buf += req->req.actual;
+
+ left = req->req.length - req->req.actual;
+
+ TRACEEP(epn, "ep%u recv %u, left %u, mpkt %u\n", epn->id,
+ recv, left, epn->ep.maxpacket);
+
+ if (left > epn->ep.maxpacket)
+ left = epn->ep.maxpacket;
+
+ if (count > left) {
+ req_status = -EOVERFLOW;
+ count = left;
+ }
+
+ if (count) {
+ nb = count / sizeof(u32);
+ if (nb) {
+ usbf_ep_reg_read_rep(epn, USBF_REG_EPN_READ,
+ buf, nb);
+ buf += (nb * sizeof(u32));
+ req->req.actual += (nb * sizeof(u32));
+ count -= (nb * sizeof(u32));
+ }
+ if (count) {
+ usbf_epn_recv_residue(epn, buf, count);
+ req->req.actual += count;
+ }
+ }
+ TRACEEP(epn, "ep%u recv %u/%u\n", epn->id,
+ req->req.actual, req->req.length);
+
+ if (req_status) {
+ TRACEEP(epn, "ep%u req.status=%d\n", epn->id,
+ req_status);
+ req->req.status = req_status;
+ return 0;
+ }
+
+ if (recv < epn->ep.maxpacket) {
+ TRACEEP(epn, "ep%u short packet\n", epn->id);
+ /* This is a short packet -> It is the end */
+ req->req.status = 0;
+ return 0;
+ }
+
+ /* Request full -> complete */
+ if (req->req.actual == req->req.length) {
+ req->req.status = 0;
+ return 0;
+ }
+ }
+
+ if (epn->status & USBF_EPN_OUT_NULL_INT) {
+ /* NULL packet received */
+ TRACEEP(epn, "ep%u null packet\n", epn->id);
+ if (req->req.actual != req->req.length) {
+ req->req.status = req->req.short_not_ok ?
+ -EREMOTEIO : 0;
+ } else {
+ req->req.status = 0;
+ }
+ return 0;
+ }
+
+ return -EINPROGRESS;
+}
+
+static void usbf_epn_enable_out_end_int(struct usbf_ep *epn)
+{
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_OUT_END_EN);
+}
+
+static void usbf_epn_process_queue(struct usbf_ep *epn);
+
+static void usbf_epn_dma_out_send_dma(struct usbf_ep *epn, dma_addr_t addr, u32 npkt, bool is_short)
+{
+ usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR2, USBF_SYS_EPN_MPKT(epn->ep.maxpacket));
+ usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_TADR, addr);
+
+ if (is_short) {
+ usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1,
+ USBF_SYS_EPN_SET_DMACNT(1) | USBF_SYS_EPN_DIR0);
+ usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1,
+ USBF_SYS_EPN_REQEN);
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT,
+ USBF_EPN_SET_DMACNT(0));
+
+ /* The end of DMA transfer at the USBF level needs to be handled
+ * after the detection of the end of DMA transfer at the brige
+ * level.
+ * To force this sequence, enabling the OUT_END interrupt will
+ * be donee by the detection of the end of transfer at bridge
+ * level (ie. bridge interrupt).
+ */
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN | USBF_EPN_OUT_END_EN);
+ epn->bridge_on_dma_end = usbf_epn_enable_out_end_int;
+
+ /* Clear any pending OUT_END interrupt */
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+ ~(u32)USBF_EPN_OUT_END_INT);
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL,
+ USBF_EPN_STOP_MODE | USBF_EPN_STOP_SET | USBF_EPN_DMAMODE0);
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL,
+ USBF_EPN_DMA_EN);
+ return;
+ }
+
+ usbf_ep_dma_reg_writel(epn, USBF_REG_DMA_EPN_DCR1,
+ USBF_SYS_EPN_SET_DMACNT(npkt) | USBF_SYS_EPN_DIR0);
+ usbf_ep_dma_reg_bitset(epn, USBF_REG_DMA_EPN_DCR1,
+ USBF_SYS_EPN_REQEN);
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_LEN_DCNT,
+ USBF_EPN_SET_DMACNT(npkt));
+
+ /* Here, the bridge may or may not generate an interrupt to signal the
+ * end of DMA transfer.
+ * Keep only OUT_END interrupt and let handle the bridge later during
+ * the OUT_END processing.
+ */
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN,
+ USBF_EPN_OUT_END_EN);
+
+ /* Disable bridge interrupt. It will be renabled later */
+ usbf_reg_bitclr(epn->udc, USBF_REG_AHBBINTEN,
+ USBF_SYS_DMA_ENDINTEN_EPN(epn->id));
+
+ /* Clear any pending DMA_END interrupt at bridge level */
+ usbf_reg_writel(epn->udc, USBF_REG_AHBBINT,
+ USBF_SYS_DMA_ENDINT_EPN(epn->id));
+
+ /* Clear any pending OUT_END interrupt */
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+ ~(u32)USBF_EPN_OUT_END_INT);
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_DMA_CTRL,
+ USBF_EPN_STOP_MODE | USBF_EPN_STOP_SET | USBF_EPN_DMAMODE0 | USBF_EPN_BURST_SET);
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_DMA_CTRL,
+ USBF_EPN_DMA_EN);
+}
+
+static size_t usbf_epn_dma_out_complete_dma(struct usbf_ep *epn, bool is_short)
+{
+ u32 dmacnt;
+ u32 tmp;
+ int ret;
+
+ /* Restore interrupt mask */
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_END_EN,
+ USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+
+ if (is_short) {
+ /* Nothing more to do when the DMA was for a short packet */
+ return 0;
+ }
+
+ /* Enable the bridge interrupt */
+ usbf_reg_bitset(epn->udc, USBF_REG_AHBBINTEN,
+ USBF_SYS_DMA_ENDINTEN_EPN(epn->id));
+
+ tmp = usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT);
+ dmacnt = USBF_EPN_GET_DMACNT(tmp);
+
+ if (dmacnt) {
+ /* Some packet were not received (halted by a short or a null
+ * packet.
+ * The bridge never raises an interrupt in this case.
+ * Wait for the end of transfer at bridge level
+ */
+ ret = readl_poll_timeout_atomic(
+ epn->dma_regs + USBF_REG_DMA_EPN_DCR1,
+ tmp, (USBF_SYS_EPN_GET_DMACNT(tmp) == dmacnt),
+ 0, 10000);
+ if (ret) {
+ dev_err(epn->udc->dev, "ep%u wait bridge timed out\n",
+ epn->id);
+ }
+
+ usbf_ep_dma_reg_bitclr(epn, USBF_REG_DMA_EPN_DCR1,
+ USBF_SYS_EPN_REQEN);
+
+ /* The dmacnt value tells how many packet were not transferred
+ * from the maximum number of packet we set for the DMA transfer.
+ * Compute the left DMA size based on this value.
+ */
+ return dmacnt * epn->ep.maxpacket;
+ }
+
+ return 0;
+}
+
+static int usbf_epn_dma_out(struct usbf_ep *epn, struct usbf_req *req)
+{
+ unsigned int dma_left;
+ unsigned int count;
+ unsigned int recv;
+ unsigned int left;
+ u32 npkt;
+ int ret;
+
+ if (!IS_ALIGNED((uintptr_t)req->req.buf, 4)) {
+ TRACEEP(epn, "ep%u buf unaligned -> fallback pio\n", epn->id);
+ return usbf_epn_pio_out(epn, req);
+ }
+
+ switch (req->xfer_step) {
+ default:
+ case USBF_XFER_START:
+ if (epn->status & USBF_EPN_OUT_NULL_INT) {
+ TRACEEP(epn, "ep%u null packet\n", epn->id);
+ if (req->req.actual != req->req.length) {
+ req->req.status = req->req.short_not_ok ?
+ -EREMOTEIO : 0;
+ } else {
+ req->req.status = 0;
+ }
+ return 0;
+ }
+
+ if (!(epn->status & USBF_EPN_OUT_INT)) {
+ TRACEEP(epn, "ep%u OUT_INT not set -> spurious\n",
+ epn->id);
+ break;
+ }
+
+ recv = USBF_EPN_GET_LDATA(
+ usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+ if (!recv) {
+ TRACEEP(epn, "ep%u recv = 0 -> spurious\n",
+ epn->id);
+ break;
+ }
+
+ left = req->req.length - req->req.actual;
+
+ TRACEEP(epn, "ep%u recv %u, left %u, mpkt %u\n", epn->id,
+ recv, left, epn->ep.maxpacket);
+
+ if (recv > left) {
+ dev_err(epn->udc->dev, "ep%u overflow (%u/%u)\n",
+ epn->id, recv, left);
+ req->req.status = -EOVERFLOW;
+ return -EOVERFLOW;
+ }
+
+ if (recv < epn->ep.maxpacket) {
+ /* Short packet received */
+ TRACEEP(epn, "ep%u short packet\n", epn->id);
+ if (recv <= 3) {
+ usbf_epn_recv_residue(epn,
+ req->req.buf + req->req.actual, recv);
+ req->req.actual += recv;
+
+ TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+ req->req.actual, req->req.length);
+
+ req->xfer_step = USBF_XFER_START;
+ return 0;
+ }
+
+ ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 0);
+ if (ret < 0) {
+ dev_err(epn->udc->dev, "map request failed (%d)\n",
+ ret);
+ return ret;
+ }
+ req->is_mapped = 1;
+
+ usbf_epn_dma_out_send_dma(epn,
+ req->req.dma + req->req.actual,
+ 1, true);
+ req->dma_size = recv & ~0x3;
+
+ TRACEEP(epn, "ep%u dma short xfer %zu\n", epn->id,
+ req->dma_size);
+
+ req->xfer_step = USBF_XFER_WAIT_DMA_SHORT;
+ break;
+ }
+
+ ret = usb_gadget_map_request(&epn->udc->gadget, &req->req, 0);
+ if (ret < 0) {
+ dev_err(epn->udc->dev, "map request failed (%d)\n",
+ ret);
+ return ret;
+ }
+ req->is_mapped = 1;
+
+ /* Use the maximum DMA size according to the request buffer.
+ * We will adjust the received size later at the end of the DMA
+ * transfer with the left size computed from
+ * usbf_epn_dma_out_complete_dma().
+ */
+ npkt = left / epn->ep.maxpacket;
+ usbf_epn_dma_out_send_dma(epn,
+ req->req.dma + req->req.actual,
+ npkt, false);
+ req->dma_size = npkt * epn->ep.maxpacket;
+
+ TRACEEP(epn, "ep%u dma xfer %zu (%u)\n", epn->id,
+ req->dma_size, npkt);
+
+ req->xfer_step = USBF_XFER_WAIT_DMA;
+ break;
+
+ case USBF_XFER_WAIT_DMA_SHORT:
+ if (!(epn->status & USBF_EPN_OUT_END_INT)) {
+ TRACEEP(epn, "ep%u dma short not done\n", epn->id);
+ break;
+ }
+ TRACEEP(epn, "ep%u dma short done\n", epn->id);
+
+ usbf_epn_dma_out_complete_dma(epn, true);
+
+ usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0);
+ req->is_mapped = 0;
+
+ req->req.actual += req->dma_size;
+
+ recv = USBF_EPN_GET_LDATA(
+ usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+
+ count = recv & 0x3;
+ if (count) {
+ TRACEEP(epn, "ep%u recv residue %u\n", epn->id,
+ count);
+ usbf_epn_recv_residue(epn,
+ req->req.buf + req->req.actual, count);
+ req->req.actual += count;
+ }
+
+ TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+ req->req.actual, req->req.length);
+
+ req->xfer_step = USBF_XFER_START;
+ return 0;
+
+ case USBF_XFER_WAIT_DMA:
+ if (!(epn->status & USBF_EPN_OUT_END_INT)) {
+ TRACEEP(epn, "ep%u dma not done\n", epn->id);
+ break;
+ }
+ TRACEEP(epn, "ep%u dma done\n", epn->id);
+
+ dma_left = usbf_epn_dma_out_complete_dma(epn, false);
+ if (dma_left) {
+ /* Adjust the final DMA size with */
+ count = req->dma_size - dma_left;
+
+ TRACEEP(epn, "ep%u dma xfer done %u\n", epn->id, count);
+
+ req->req.actual += count;
+
+ if (epn->status & USBF_EPN_OUT_NULL_INT) {
+ /* DMA was stopped by a null packet reception */
+ TRACEEP(epn, "ep%u dma stopped by null pckt\n",
+ epn->id);
+ usb_gadget_unmap_request(&epn->udc->gadget,
+ &req->req, 0);
+ req->is_mapped = 0;
+
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+ ~(u32)USBF_EPN_OUT_NULL_INT);
+
+ if (req->req.actual != req->req.length) {
+ req->req.status = req->req.short_not_ok ?
+ -EREMOTEIO : 0;
+ } else {
+ req->req.status = 0;
+ }
+ TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+ req->req.actual, req->req.length);
+ req->xfer_step = USBF_XFER_START;
+ return 0;
+ }
+
+ recv = USBF_EPN_GET_LDATA(
+ usbf_ep_reg_readl(epn, USBF_REG_EPN_LEN_DCNT));
+ left = req->req.length - req->req.actual;
+ if (recv > left) {
+ dev_err(epn->udc->dev,
+ "ep%u overflow (%u/%u)\n", epn->id,
+ recv, left);
+ req->req.status = -EOVERFLOW;
+ usb_gadget_unmap_request(&epn->udc->gadget,
+ &req->req, 0);
+ req->is_mapped = 0;
+
+ req->xfer_step = USBF_XFER_START;
+ return -EOVERFLOW;
+ }
+
+ if (recv > 3) {
+ usbf_epn_dma_out_send_dma(epn,
+ req->req.dma + req->req.actual,
+ 1, true);
+ req->dma_size = recv & ~0x3;
+
+ TRACEEP(epn, "ep%u dma short xfer %zu\n", epn->id,
+ req->dma_size);
+
+ req->xfer_step = USBF_XFER_WAIT_DMA_SHORT;
+ break;
+ }
+
+ usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0);
+ req->is_mapped = 0;
+
+ count = recv & 0x3;
+ if (count) {
+ TRACEEP(epn, "ep%u recv residue %u\n", epn->id,
+ count);
+ usbf_epn_recv_residue(epn,
+ req->req.buf + req->req.actual, count);
+ req->req.actual += count;
+ }
+
+ TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+ req->req.actual, req->req.length);
+
+ req->xfer_step = USBF_XFER_START;
+ return 0;
+ }
+
+ /* Process queue at bridge interrupt only */
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_END_EN | USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+ epn->status = 0;
+ epn->bridge_on_dma_end = usbf_epn_process_queue;
+
+ req->xfer_step = USBF_XFER_WAIT_BRIDGE;
+ break;
+
+ case USBF_XFER_WAIT_BRIDGE:
+ TRACEEP(epn, "ep%u bridge transfers done\n", epn->id);
+
+ /* Restore interrupt mask */
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_END_EN,
+ USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+
+ usb_gadget_unmap_request(&epn->udc->gadget, &req->req, 0);
+ req->is_mapped = 0;
+
+ req->req.actual += req->dma_size;
+
+ req->xfer_step = USBF_XFER_START;
+ left = req->req.length - req->req.actual;
+ if (!left) {
+ /* No more data can be added to the buffer */
+ TRACEEP(epn, "ep%u recv done %u/%u\n", epn->id,
+ req->req.actual, req->req.length);
+ return 0;
+ }
+ TRACEEP(epn, "ep%u recv done %u/%u, wait more data\n", epn->id,
+ req->req.actual, req->req.length);
+ break;
+ }
+
+ return -EINPROGRESS;
+}
+
+static void usbf_epn_dma_stop(struct usbf_ep *epn)
+{
+ usbf_ep_dma_reg_bitclr(epn, USBF_REG_DMA_EPN_DCR1, USBF_SYS_EPN_REQEN);
+
+ /* In the datasheet:
+ * If EP[m]_REQEN = 0b is set during DMA transfer, AHB-EPC stops DMA
+ * after 1 packet transfer completed.
+ * Therefore, wait sufficient time for ensuring DMA transfer
+ * completion. The WAIT time depends on the system, especially AHB
+ * bus activity
+ * So arbitrary 10ms would be sufficient.
+ */
+ mdelay(10);
+
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_DMA_CTRL, USBF_EPN_DMA_EN);
+}
+
+static void usbf_epn_dma_abort(struct usbf_ep *epn, struct usbf_req *req)
+{
+ TRACEEP(epn, "ep%u %s dma abort\n", epn->id, epn->is_in ? "in" : "out");
+
+ epn->bridge_on_dma_end = NULL;
+
+ usbf_epn_dma_stop(epn);
+
+ usb_gadget_unmap_request(&epn->udc->gadget, &req->req,
+ epn->is_in ? 1 : 0);
+ req->is_mapped = 0;
+
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
+
+ if (epn->is_in) {
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_IN_END_EN,
+ USBF_EPN_IN_EN);
+ } else {
+ usbf_ep_reg_clrset(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_END_EN,
+ USBF_EPN_OUT_EN | USBF_EPN_OUT_NULL_EN);
+ }
+
+ /* As dma is stopped, be sure that no DMA interrupt are pending */
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS,
+ USBF_EPN_IN_END_INT | USBF_EPN_OUT_END_INT);
+
+ usbf_reg_writel(epn->udc, USBF_REG_AHBBINT, USBF_SYS_DMA_ENDINT_EPN(epn->id));
+
+ /* Enable DMA interrupt the bridge level */
+ usbf_reg_bitset(epn->udc, USBF_REG_AHBBINTEN,
+ USBF_SYS_DMA_ENDINTEN_EPN(epn->id));
+
+ /* Reset transfer step */
+ req->xfer_step = USBF_XFER_START;
+}
+
+static void usbf_epn_fifo_flush(struct usbf_ep *epn)
+{
+ u32 ctrl;
+ u32 sts;
+ int ret;
+
+ TRACEEP(epn, "ep%u %s fifo flush\n", epn->id, epn->is_in ? "in" : "out");
+
+ ctrl = usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL);
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_CONTROL, ctrl | USBF_EPN_BCLR);
+
+ if (ctrl & USBF_EPN_DIR0)
+ return;
+
+ ret = readl_poll_timeout_atomic(epn->regs + USBF_REG_EPN_STATUS, sts,
+ (sts & (USBF_EPN_IN_DATA | USBF_EPN_IN_EMPTY)) == USBF_EPN_IN_EMPTY,
+ 0, 10000);
+ if (ret)
+ dev_err(epn->udc->dev, "ep%u flush fifo timed out\n", epn->id);
+}
+
+static void usbf_ep_req_done(struct usbf_ep *ep, struct usbf_req *req,
+ int status)
+{
+ list_del_init(&req->queue);
+
+ if (status) {
+ req->req.status = status;
+ } else {
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ }
+
+ TRACEEP(ep, "ep%u %s req done length %u/%u, status=%d\n", ep->id,
+ ep->is_in ? "in" : "out",
+ req->req.actual, req->req.length, req->req.status);
+
+ if (req->is_mapped)
+ usbf_epn_dma_abort(ep, req);
+
+ spin_unlock(&ep->udc->lock);
+ usb_gadget_giveback_request(&ep->ep, &req->req);
+ spin_lock(&ep->udc->lock);
+}
+
+static void usbf_ep_nuke(struct usbf_ep *ep, int status)
+{
+ struct usbf_req *req;
+
+ TRACEEP(ep, "ep%u %s nuke status %d\n", ep->id,
+ ep->is_in ? "in" : "out",
+ status);
+
+ while (!list_empty(&ep->queue)) {
+ req = list_first_entry(&ep->queue, struct usbf_req, queue);
+ usbf_ep_req_done(ep, req, status);
+ }
+
+ if (ep->id == 0)
+ usbf_ep0_fifo_flush(ep);
+ else
+ usbf_epn_fifo_flush(ep);
+}
+
+static bool usbf_ep_is_stalled(struct usbf_ep *ep)
+{
+ u32 ctrl;
+
+ if (ep->id == 0) {
+ ctrl = usbf_ep_reg_readl(ep, USBF_REG_EP0_CONTROL);
+ return (ctrl & USBF_EP0_STL) ? true : false;
+ }
+
+ ctrl = usbf_ep_reg_readl(ep, USBF_REG_EPN_CONTROL);
+ if (ep->is_in)
+ return (ctrl & USBF_EPN_ISTL) ? true : false;
+
+ return (ctrl & USBF_EPN_OSTL) ? true : false;
+}
+
+static int usbf_epn_start_queue(struct usbf_ep *epn)
+{
+ struct usbf_req *req;
+ int ret;
+
+ if (usbf_ep_is_stalled(epn))
+ return 0;
+
+ req = list_first_entry_or_null(&epn->queue, struct usbf_req, queue);
+
+ if (epn->is_in) {
+ if (req && !epn->is_processing) {
+ ret = epn->dma_regs ?
+ usbf_epn_dma_in(epn, req) :
+ usbf_epn_pio_in(epn, req);
+ if (ret != -EINPROGRESS) {
+ dev_err(epn->udc->dev,
+ "queued next request not in progress\n");
+ /* The request cannot be completed (ie
+ * ret == 0) on the first call.
+ * stall and nuke the endpoint
+ */
+ return ret ? ret : -EIO;
+ }
+ }
+ } else {
+ if (req) {
+ /* Clear ONAK to accept OUT tokens */
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL,
+ USBF_EPN_ONAK);
+
+ /* Enable interrupts */
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+ } else {
+ /* Disable incoming data and interrupt.
+ * They will be enable on next usb_eb_queue call
+ */
+ usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL,
+ USBF_EPN_ONAK);
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+ }
+ }
+ return 0;
+}
+
+static int usbf_ep_process_queue(struct usbf_ep *ep)
+{
+ int (*usbf_ep_xfer)(struct usbf_ep *ep, struct usbf_req *req);
+ struct usbf_req *req;
+ int is_processing;
+ int ret;
+
+ if (ep->is_in) {
+ usbf_ep_xfer = usbf_ep0_pio_in;
+ if (ep->id) {
+ usbf_ep_xfer = ep->dma_regs ?
+ usbf_epn_dma_in : usbf_epn_pio_in;
+ }
+ } else {
+ usbf_ep_xfer = usbf_ep0_pio_out;
+ if (ep->id) {
+ usbf_ep_xfer = ep->dma_regs ?
+ usbf_epn_dma_out : usbf_epn_pio_out;
+ }
+ }
+
+ req = list_first_entry_or_null(&ep->queue, struct usbf_req, queue);
+ if (!req) {
+ dev_err(ep->udc->dev,
+ "no request available for ep%u %s process\n", ep->id,
+ ep->is_in ? "in" : "out");
+ return -ENOENT;
+ }
+
+ do {
+ /* Were going to read the FIFO for this current request.
+ * NAK any other incoming data to avoid a race condition if no
+ * more request are available.
+ */
+ if (!ep->is_in && ep->id != 0) {
+ usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL,
+ USBF_EPN_ONAK);
+ }
+
+ ret = usbf_ep_xfer(ep, req);
+ if (ret == -EINPROGRESS) {
+ if (!ep->is_in && ep->id != 0) {
+ /* The current request needs more data.
+ * Allow incoming data
+ */
+ usbf_ep_reg_bitclr(ep, USBF_REG_EPN_CONTROL,
+ USBF_EPN_ONAK);
+ }
+ return ret;
+ }
+
+ is_processing = ep->is_processing;
+ ep->is_processing = 1;
+ usbf_ep_req_done(ep, req, ret);
+ ep->is_processing = is_processing;
+
+ if (ret) {
+ /* An error was detected during the request transfer.
+ * Any pending DMA transfers were aborted by the
+ * usbf_ep_req_done() call.
+ * It's time to flush the fifo
+ */
+ if (ep->id == 0)
+ usbf_ep0_fifo_flush(ep);
+ else
+ usbf_epn_fifo_flush(ep);
+ }
+
+ req = list_first_entry_or_null(&ep->queue, struct usbf_req,
+ queue);
+
+ if (ep->is_in)
+ continue;
+
+ if (ep->id != 0) {
+ if (req) {
+ /* An other request is available.
+ * Allow incoming data
+ */
+ usbf_ep_reg_bitclr(ep, USBF_REG_EPN_CONTROL,
+ USBF_EPN_ONAK);
+ } else {
+ /* No request queued. Disable interrupts.
+ * They will be enabled on usb_ep_queue
+ */
+ usbf_ep_reg_bitclr(ep, USBF_REG_EPN_INT_ENA,
+ USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+ }
+ }
+ /* Do not recall usbf_ep_xfer() */
+ return req ? -EINPROGRESS : 0;
+
+ } while (req);
+
+ return 0;
+}
+
+static void usbf_ep_stall(struct usbf_ep *ep, bool stall)
+{
+ struct usbf_req *first;
+
+ TRACEEP(ep, "ep%u %s %s\n", ep->id,
+ ep->is_in ? "in" : "out",
+ stall ? "stall" : "unstall");
+
+ if (ep->id == 0) {
+ if (stall)
+ usbf_ep_reg_bitset(ep, USBF_REG_EP0_CONTROL, USBF_EP0_STL);
+ else
+ usbf_ep_reg_bitclr(ep, USBF_REG_EP0_CONTROL, USBF_EP0_STL);
+ return;
+ }
+
+ if (stall) {
+ if (ep->is_in)
+ usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL,
+ USBF_EPN_ISTL);
+ else
+ usbf_ep_reg_bitset(ep, USBF_REG_EPN_CONTROL,
+ USBF_EPN_OSTL | USBF_EPN_OSTL_EN);
+ } else {
+ first = list_first_entry_or_null(&ep->queue, struct usbf_req, queue);
+ if (first && first->is_mapped) {
+ /* This can appear if the host halts an endpoint using
+ * SET_FEATURE and then un-halts the endpoint
+ */
+ usbf_epn_dma_abort(ep, first);
+ }
+ usbf_epn_fifo_flush(ep);
+ if (ep->is_in) {
+ usbf_ep_reg_clrset(ep, USBF_REG_EPN_CONTROL,
+ USBF_EPN_ISTL,
+ USBF_EPN_IPIDCLR);
+ } else {
+ usbf_ep_reg_clrset(ep, USBF_REG_EPN_CONTROL,
+ USBF_EPN_OSTL,
+ USBF_EPN_OSTL_EN | USBF_EPN_OPIDCLR);
+ }
+ usbf_epn_start_queue(ep);
+ }
+}
+
+static void usbf_ep0_enable(struct usbf_ep *ep0)
+{
+ usbf_ep_reg_writel(ep0, USBF_REG_EP0_CONTROL, USBF_EP0_INAK_EN | USBF_EP0_BCLR);
+
+ usbf_ep_reg_writel(ep0, USBF_REG_EP0_INT_ENA,
+ USBF_EP0_SETUP_EN | USBF_EP0_STG_START_EN | USBF_EP0_STG_END_EN |
+ USBF_EP0_OUT_EN | USBF_EP0_OUT_NULL_EN | USBF_EP0_IN_EN);
+
+ ep0->udc->ep0state = EP0_IDLE;
+ ep0->disabled = 0;
+
+ /* enable interrupts for the ep0 */
+ usbf_reg_bitset(ep0->udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(0));
+}
+
+static int usbf_epn_enable(struct usbf_ep *epn)
+{
+ u32 base_addr;
+ u32 ctrl;
+
+ base_addr = usbf_ep_info[epn->id].base_addr;
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_PCKT_ADRS,
+ USBF_EPN_BASEAD(base_addr) | USBF_EPN_MPKT(epn->ep.maxpacket));
+
+ /* OUT transfer interrupt are enabled during usb_ep_queue */
+ if (epn->is_in) {
+ /* Will be changed in DMA processing */
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_INT_ENA, USBF_EPN_IN_EN);
+ }
+
+ /* Clear, set endpoint direction, set IN/OUT STL, and enable
+ * Send NAK for Data out as request are not queued yet
+ */
+ ctrl = USBF_EPN_EN | USBF_EPN_BCLR;
+ if (epn->is_in)
+ ctrl |= USBF_EPN_OSTL | USBF_EPN_OSTL_EN;
+ else
+ ctrl |= USBF_EPN_DIR0 | USBF_EPN_ISTL | USBF_EPN_OSTL_EN | USBF_EPN_ONAK;
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_CONTROL, ctrl);
+
+ return 0;
+}
+
+static int usbf_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+ struct usbf_udc *udc = ep->udc;
+ unsigned long flags;
+ int ret;
+
+ if (ep->id == 0) {
+ TRACEEP(ep, "ep0 invalid call\n");
+ return -EINVAL;
+ }
+
+ if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+ TRACEEP(ep, "ep%u bad descriptor\n", ep->id);
+ return -EINVAL;
+ }
+
+ TRACEEP(ep, "ep%u %s mpkts %d\n", ep->id,
+ usb_endpoint_dir_in(desc) ? "in" : "out",
+ usb_endpoint_maxp(desc));
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ ep->is_in = usb_endpoint_dir_in(desc);
+ ep->ep.maxpacket = usb_endpoint_maxp(desc);
+
+ ret = usbf_epn_enable(ep);
+ if (ret)
+ goto end;
+
+ ep->disabled = 0;
+
+ /* enable interrupts for this endpoint */
+ usbf_reg_bitset(udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(ep->id));
+
+ /* enable DMA interrupt at bridge level if DMA is used */
+ if (ep->dma_regs) {
+ ep->bridge_on_dma_end = NULL;
+ usbf_reg_bitset(udc, USBF_REG_AHBBINTEN,
+ USBF_SYS_DMA_ENDINTEN_EPN(ep->id));
+ }
+
+ ret = 0;
+end:
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return ret;
+}
+
+static int usbf_epn_disable(struct usbf_ep *epn)
+{
+ /* Disable interrupts */
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_INT_ENA, 0);
+
+ /* Disable endpoint */
+ usbf_ep_reg_bitclr(epn, USBF_REG_EPN_CONTROL, USBF_EPN_EN);
+
+ /* remove anything that was pending */
+ usbf_ep_nuke(epn, -ESHUTDOWN);
+
+ return 0;
+}
+
+static int usbf_ep_disable(struct usb_ep *_ep)
+{
+ struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+ struct usbf_udc *udc = ep->udc;
+ unsigned long flags;
+ int ret;
+
+ if (ep->id == 0) {
+ TRACEEP(ep, "ep0 invalid call\n");
+ return -EINVAL;
+ }
+
+ TRACEEP(ep, "ep%u %s mpkts %d\n", ep->id,
+ ep->is_in ? "in" : "out", ep->ep.maxpacket);
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ ep->disabled = 1;
+ /* Disable DMA interrupt */
+ if (ep->dma_regs) {
+ usbf_reg_bitclr(udc, USBF_REG_AHBBINTEN,
+ USBF_SYS_DMA_ENDINTEN_EPN(ep->id));
+ ep->bridge_on_dma_end = NULL;
+ }
+ /* disable interrupts for this endpoint */
+ usbf_reg_bitclr(udc, USBF_REG_USB_INT_ENA, USBF_USB_EPN_EN(ep->id));
+ /* and the endpoint itself */
+ ret = usbf_epn_disable(ep);
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+ return ret;
+}
+
+static int usbf_ep0_queue(struct usbf_ep *ep0, struct usbf_req *req,
+ gfp_t gfp_flags)
+{
+ int ret;
+
+ req->req.actual = 0;
+ req->req.status = -EINPROGRESS;
+ req->is_zero_sent = 0;
+
+ list_add_tail(&req->queue, &ep0->queue);
+
+ if (ep0->udc->ep0state == EP0_IN_STATUS_START_PHASE)
+ return 0;
+
+ if (!ep0->is_in)
+ return 0;
+
+ if (ep0->udc->ep0state == EP0_IN_STATUS_PHASE) {
+ if (req->req.length) {
+ dev_err(ep0->udc->dev,
+ "request lng %u for ep0 in status phase\n",
+ req->req.length);
+ return -EINVAL;
+ }
+ ep0->delayed_status = 0;
+ }
+ if (!ep0->is_processing) {
+ ret = usbf_ep0_pio_in(ep0, req);
+ if (ret != -EINPROGRESS) {
+ dev_err(ep0->udc->dev,
+ "queued request not in progress\n");
+ /* The request cannot be completed (ie
+ * ret == 0) on the first call
+ */
+ return ret ? ret : -EIO;
+ }
+ }
+
+ return 0;
+}
+
+static int usbf_epn_queue(struct usbf_ep *ep, struct usbf_req *req,
+ gfp_t gfp_flags)
+{
+ int was_empty;
+ int ret;
+
+ if (ep->disabled) {
+ dev_err(ep->udc->dev, "ep%u request queue while disable\n",
+ ep->id);
+ return -ESHUTDOWN;
+ }
+
+ req->req.actual = 0;
+ req->req.status = -EINPROGRESS;
+ req->is_zero_sent = 0;
+ req->xfer_step = USBF_XFER_START;
+
+ was_empty = list_empty(&ep->queue);
+ list_add_tail(&req->queue, &ep->queue);
+ if (was_empty) {
+ ret = usbf_epn_start_queue(ep);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+static int usbf_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+ gfp_t gfp_flags)
+{
+ struct usbf_req *req = container_of(_req, struct usbf_req, req);
+ struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+ struct usbf_udc *udc = ep->udc;
+ unsigned long flags;
+ int ret;
+
+ if (!_req || !_req->buf) {
+ TRACEEP(ep, "ep%u invalid request\n", ep->id);
+ return -EINVAL;
+ }
+
+ if (!udc || !udc->driver) {
+ TRACEEP(ep, "ep%u invalid device\n", ep->id);
+ return -EINVAL;
+ }
+
+ TRACEEP(ep, "ep%u %s req queue length %u, zero %u, short_not_ok %u\n",
+ ep->id, ep->is_in ? "in" : "out",
+ req->req.length, req->req.zero, req->req.short_not_ok);
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ if (ep->id == 0)
+ ret = usbf_ep0_queue(ep, req, gfp_flags);
+ else
+ ret = usbf_epn_queue(ep, req, gfp_flags);
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return ret;
+}
+
+static int usbf_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct usbf_req *req = container_of(_req, struct usbf_req, req);
+ struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+ unsigned long flags;
+ int is_processing;
+ int first;
+ int ret;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+
+ TRACEEP(ep, "ep%u %s req dequeue length %u/%u\n",
+ ep->id, ep->is_in ? "in" : "out",
+ req->req.actual, req->req.length);
+
+ first = list_is_first(&req->queue, &ep->queue);
+
+ /* Complete the request but avoid any operation that could be done
+ * if a new request is queued during the request completion
+ */
+ is_processing = ep->is_processing;
+ ep->is_processing = 1;
+ usbf_ep_req_done(ep, req, -ECONNRESET);
+ ep->is_processing = is_processing;
+
+ if (first) {
+ /* The first item in the list was dequeued.
+ * This item could already be submitted to the hardware.
+ * So, flush the fifo
+ */
+ if (ep->id)
+ usbf_epn_fifo_flush(ep);
+ else
+ usbf_ep0_fifo_flush(ep);
+ }
+
+ if (ep->id == 0) {
+ /* We dequeue a request on ep0. On this endpoint, we can have
+ * 1 request related to the data stage and/or 1 request
+ * related to the status stage.
+ * We dequeue one of them and so the USB control transaction
+ * is no more coherent. The simple way to be consistent after
+ * dequeuing is to stall and nuke the endpoint and wait the
+ * next SETUP packet.
+ */
+ usbf_ep_stall(ep, true);
+ usbf_ep_nuke(ep, -ECONNRESET);
+ ep->udc->ep0state = EP0_IDLE;
+ goto end;
+ }
+
+ if (!first)
+ goto end;
+
+ ret = usbf_epn_start_queue(ep);
+ if (ret) {
+ usbf_ep_stall(ep, true);
+ usbf_ep_nuke(ep, -EIO);
+ }
+end:
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return 0;
+}
+
+static struct usb_request *usbf_ep_alloc_request(struct usb_ep *_ep,
+ gfp_t gfp_flags)
+{
+ struct usbf_req *req;
+
+ if (!_ep)
+ return NULL;
+
+ req = kzalloc(sizeof(*req), gfp_flags);
+ if (!req)
+ return NULL;
+
+ INIT_LIST_HEAD(&req->queue);
+
+ return &req->req;
+}
+
+static void usbf_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct usbf_req *req;
+ unsigned long flags;
+ struct usbf_ep *ep;
+
+ if (!_ep || !_req)
+ return;
+
+ req = container_of(_req, struct usbf_req, req);
+ ep = container_of(_ep, struct usbf_ep, ep);
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ list_del_init(&req->queue);
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ kfree(req);
+}
+
+static int usbf_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+ struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+ unsigned long flags;
+ int ret;
+
+ if (ep->id == 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+
+ if (!list_empty(&ep->queue)) {
+ ret = -EAGAIN;
+ goto end;
+ }
+
+ usbf_ep_stall(ep, halt);
+ if (!halt)
+ ep->is_wedged = 0;
+
+ ret = 0;
+end:
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+ return ret;
+}
+
+static int usbf_ep_set_wedge(struct usb_ep *_ep)
+{
+ struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+ unsigned long flags;
+ int ret;
+
+ if (ep->id == 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ if (!list_empty(&ep->queue)) {
+ ret = -EAGAIN;
+ goto end;
+ }
+ usbf_ep_stall(ep, 1);
+ ep->is_wedged = 1;
+
+ ret = 0;
+end:
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return ret;
+}
+
+static struct usb_ep_ops usbf_ep_ops = {
+ .enable = usbf_ep_enable,
+ .disable = usbf_ep_disable,
+ .queue = usbf_ep_queue,
+ .dequeue = usbf_ep_dequeue,
+ .set_halt = usbf_ep_set_halt,
+ .set_wedge = usbf_ep_set_wedge,
+ .alloc_request = usbf_ep_alloc_request,
+ .free_request = usbf_ep_free_request,
+};
+
+static void usbf_ep0_req_complete(struct usb_ep *_ep, struct usb_request *_req)
+{
+}
+
+static void usbf_ep0_fill_req(struct usbf_ep *ep0, struct usbf_req *req,
+ void *buf, unsigned int length,
+ void (*complete)(struct usb_ep *_ep,
+ struct usb_request *_req))
+{
+ if (buf && length)
+ memcpy(ep0->udc->ep0_buf, buf, length);
+
+ req->req.buf = ep0->udc->ep0_buf;
+ req->req.length = length;
+ req->req.dma = 0;
+ req->req.zero = true;
+ req->req.complete = complete ? complete : usbf_ep0_req_complete;
+ req->req.status = -EINPROGRESS;
+ req->req.context = NULL;
+ req->req.actual = 0;
+}
+
+static struct usbf_ep *usbf_get_ep_by_addr(struct usbf_udc *udc, u8 address)
+{
+ struct usbf_ep *ep;
+ unsigned int i;
+
+ if ((address & USB_ENDPOINT_NUMBER_MASK) == 0)
+ return &udc->ep[0];
+
+ for (i = 1; i < ARRAY_SIZE(udc->ep); i++) {
+ ep = &udc->ep[i];
+
+ if (!ep->ep.desc)
+ continue;
+
+ if (ep->ep.desc->bEndpointAddress == address)
+ return ep;
+ }
+
+ return NULL;
+}
+
+static int usbf_req_delegate(struct usbf_udc *udc,
+ const struct usb_ctrlrequest *ctrlrequest)
+{
+ int ret;
+
+ spin_unlock(&udc->lock);
+ ret = udc->driver->setup(&udc->gadget, ctrlrequest);
+ spin_lock(&udc->lock);
+ if (ret < 0) {
+ TRACEEP(&udc->ep[0], "udc driver setup failed %d\n", ret);
+ return ret;
+ }
+ if (ret == USB_GADGET_DELAYED_STATUS) {
+ TRACEEP(&udc->ep[0], "delayed status set\n");
+ udc->ep[0].delayed_status = 1;
+ return 0;
+ }
+ return ret;
+}
+
+static int usbf_req_get_status(struct usbf_udc *udc,
+ const struct usb_ctrlrequest *ctrlrequest)
+{
+ struct usbf_ep *ep;
+ u16 status_data;
+ u16 wLength;
+ u16 wValue;
+ u16 wIndex;
+
+ wValue = le16_to_cpu(ctrlrequest->wValue);
+ wLength = le16_to_cpu(ctrlrequest->wLength);
+ wIndex = le16_to_cpu(ctrlrequest->wIndex);
+
+ switch (ctrlrequest->bRequestType) {
+ case USB_DIR_IN | USB_RECIP_DEVICE | USB_TYPE_STANDARD:
+ if ((wValue != 0) || (wIndex != 0) || (wLength != 2))
+ goto delegate;
+
+ status_data = 0;
+ if (udc->gadget.is_selfpowered)
+ status_data |= BIT(USB_DEVICE_SELF_POWERED);
+
+ if (udc->is_remote_wakeup)
+ status_data |= BIT(USB_DEVICE_REMOTE_WAKEUP);
+
+ break;
+
+ case USB_DIR_IN | USB_RECIP_ENDPOINT | USB_TYPE_STANDARD:
+ if ((wValue != 0) || (wLength != 2))
+ goto delegate;
+
+ ep = usbf_get_ep_by_addr(udc, wIndex);
+ if (!ep)
+ return -EINVAL;
+
+ status_data = 0;
+ if (usbf_ep_is_stalled(ep))
+ status_data |= cpu_to_le16(1);
+ break;
+
+ case USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_STANDARD:
+ if ((wValue != 0) || (wLength != 2))
+ goto delegate;
+ status_data = 0;
+ break;
+
+ default:
+ goto delegate;
+ }
+
+ usbf_ep0_fill_req(&udc->ep[0], &udc->setup_reply, &status_data,
+ sizeof(status_data), NULL);
+ usbf_ep0_queue(&udc->ep[0], &udc->setup_reply, GFP_ATOMIC);
+
+ return 0;
+
+delegate:
+ return usbf_req_delegate(udc, ctrlrequest);
+}
+
+static int usbf_req_clear_set_feature(struct usbf_udc *udc,
+ const struct usb_ctrlrequest *ctrlrequest,
+ bool is_set)
+{
+ struct usbf_ep *ep;
+ u16 wLength;
+ u16 wValue;
+ u16 wIndex;
+
+ wValue = le16_to_cpu(ctrlrequest->wValue);
+ wLength = le16_to_cpu(ctrlrequest->wLength);
+ wIndex = le16_to_cpu(ctrlrequest->wIndex);
+
+ switch (ctrlrequest->bRequestType) {
+ case USB_DIR_OUT | USB_RECIP_DEVICE:
+ if ((wIndex != 0) || (wLength != 0))
+ goto delegate;
+
+ if (wValue != cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
+ goto delegate;
+
+ udc->is_remote_wakeup = is_set;
+ break;
+
+ case USB_DIR_OUT | USB_RECIP_ENDPOINT:
+ if (wLength != 0)
+ goto delegate;
+
+ ep = usbf_get_ep_by_addr(udc, wIndex);
+ if (!ep)
+ return -EINVAL;
+
+ if ((ep->id == 0) && is_set) {
+ /* Endpoint 0 cannot be halted (stalled)
+ * Returning an error code leads to a STALL on this ep0
+ * but keep the automate in a consistent state.
+ */
+ return -EINVAL;
+ }
+ if (ep->is_wedged && !is_set) {
+ /* Ignore CLEAR_FEATURE(HALT ENDPOINT) when the
+ * endpoint is wedged
+ */
+ break;
+ }
+ usbf_ep_stall(ep, is_set);
+ break;
+
+ default:
+ goto delegate;
+ }
+
+ return 0;
+
+delegate:
+ return usbf_req_delegate(udc, ctrlrequest);
+}
+
+static void usbf_ep0_req_set_address_complete(struct usb_ep *_ep,
+ struct usb_request *_req)
+{
+ struct usbf_ep *ep = container_of(_ep, struct usbf_ep, ep);
+
+ /* The status phase of the SET_ADDRESS request is completed ... */
+ if (_req->status == 0) {
+ /* ... without any errors -> Signaled the state to the core. */
+ usb_gadget_set_state(&ep->udc->gadget, USB_STATE_ADDRESS);
+ }
+
+ /* In case of request failure, there is no need to revert the address
+ * value set to the hardware as the hardware will take care of the
+ * value only if the status stage is completed normally.
+ */
+}
+
+static int usbf_req_set_address(struct usbf_udc *udc,
+ const struct usb_ctrlrequest *ctrlrequest)
+{
+ u16 wLength;
+ u16 wValue;
+ u16 wIndex;
+ u32 addr;
+
+ wValue = le16_to_cpu(ctrlrequest->wValue);
+ wLength = le16_to_cpu(ctrlrequest->wLength);
+ wIndex = le16_to_cpu(ctrlrequest->wIndex);
+
+ if (ctrlrequest->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
+ goto delegate;
+
+ if ((wIndex != 0) || (wLength != 0) || (wValue > 127))
+ return -EINVAL;
+
+ addr = wValue;
+ /* The hardware will take care of this USB address after the status
+ * stage of the SET_ADDRESS request is completed normally.
+ * It is safe to write it now
+ */
+ usbf_reg_writel(udc, USBF_REG_USB_ADDRESS, USBF_USB_SET_USB_ADDR(addr));
+
+ /* Queued the status request */
+ usbf_ep0_fill_req(&udc->ep[0], &udc->setup_reply, NULL, 0,
+ usbf_ep0_req_set_address_complete);
+ usbf_ep0_queue(&udc->ep[0], &udc->setup_reply, GFP_ATOMIC);
+
+ return 0;
+
+delegate:
+ return usbf_req_delegate(udc, ctrlrequest);
+}
+
+static int usbf_req_set_configuration(struct usbf_udc *udc,
+ const struct usb_ctrlrequest *ctrlrequest)
+{
+ u16 wLength;
+ u16 wValue;
+ u16 wIndex;
+ int ret;
+
+ ret = usbf_req_delegate(udc, ctrlrequest);
+ if (ret)
+ return ret;
+
+ wValue = le16_to_cpu(ctrlrequest->wValue);
+ wLength = le16_to_cpu(ctrlrequest->wLength);
+ wIndex = le16_to_cpu(ctrlrequest->wIndex);
+
+ if ((ctrlrequest->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) ||
+ (wIndex != 0) || (wLength != 0)) {
+ /* No error detected by driver->setup() but it is not an USB2.0
+ * Ch9 SET_CONFIGURATION.
+ * Nothing more to do
+ */
+ return 0;
+ }
+
+ if (wValue & 0x00FF) {
+ usbf_reg_bitset(udc, USBF_REG_USB_CONTROL, USBF_USB_CONF);
+ } else {
+ usbf_reg_bitclr(udc, USBF_REG_USB_CONTROL, USBF_USB_CONF);
+ /* Go back to Address State */
+ spin_unlock(&udc->lock);
+ usb_gadget_set_state(&udc->gadget, USB_STATE_ADDRESS);
+ spin_lock(&udc->lock);
+ }
+
+ return 0;
+}
+
+static int usbf_handle_ep0_setup(struct usbf_ep *ep0)
+{
+ union {
+ struct usb_ctrlrequest ctrlreq;
+ u32 raw[2];
+ } crq;
+ struct usbf_udc *udc = ep0->udc;
+ int ret;
+
+ /* Read setup data (ie the USB control request) */
+ crq.raw[0] = usbf_reg_readl(udc, USBF_REG_SETUP_DATA0);
+ crq.raw[1] = usbf_reg_readl(udc, USBF_REG_SETUP_DATA1);
+
+ TRACEEP(ep0,
+ "req%02x.%02x, wValue 0x%04x, wIndex 0x%04x, wLength 0x%04x\n",
+ crq.ctrlreq.bRequestType, crq.ctrlreq.bRequest,
+ crq.ctrlreq.wValue, crq.ctrlreq.wIndex, crq.ctrlreq.wLength);
+
+ /* Set current EP0 state according to the received request */
+ if (crq.ctrlreq.wLength) {
+ if (crq.ctrlreq.bRequestType & USB_DIR_IN) {
+ udc->ep0state = EP0_IN_DATA_PHASE;
+ usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL,
+ USBF_EP0_INAK,
+ USBF_EP0_INAK_EN);
+ ep0->is_in = 1;
+ } else {
+ udc->ep0state = EP0_OUT_DATA_PHASE;
+ usbf_ep_reg_bitclr(ep0, USBF_REG_EP0_CONTROL,
+ USBF_EP0_ONAK);
+ ep0->is_in = 0;
+ }
+ } else {
+ udc->ep0state = EP0_IN_STATUS_START_PHASE;
+ ep0->is_in = 1;
+ }
+
+ /* We starts a new control transfer -> Clear the delayed status flag */
+ ep0->delayed_status = 0;
+
+ if ((crq.ctrlreq.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) {
+ /* This is not a USB standard request -> delelate */
+ goto delegate;
+ }
+
+ switch (crq.ctrlreq.bRequest) {
+ case USB_REQ_GET_STATUS:
+ ret = usbf_req_get_status(udc, &crq.ctrlreq);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ ret = usbf_req_clear_set_feature(udc, &crq.ctrlreq, false);
+ break;
+
+ case USB_REQ_SET_FEATURE:
+ ret = usbf_req_clear_set_feature(udc, &crq.ctrlreq, true);
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ ret = usbf_req_set_address(udc, &crq.ctrlreq);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ ret = usbf_req_set_configuration(udc, &crq.ctrlreq);
+ break;
+
+ default:
+ goto delegate;
+ }
+
+ return ret;
+
+delegate:
+ return usbf_req_delegate(udc, &crq.ctrlreq);
+}
+
+static int usbf_handle_ep0_data_status(struct usbf_ep *ep0,
+ const char *ep0state_name,
+ enum usbf_ep0state next_ep0state)
+{
+ struct usbf_udc *udc = ep0->udc;
+ int ret;
+
+ ret = usbf_ep_process_queue(ep0);
+ switch (ret) {
+ case -ENOENT:
+ dev_err(udc->dev,
+ "no request available for ep0 %s phase\n",
+ ep0state_name);
+ break;
+ case -EINPROGRESS:
+ /* More data needs to be processed */
+ ret = 0;
+ break;
+ case 0:
+ /* All requests in the queue are processed */
+ udc->ep0state = next_ep0state;
+ break;
+ default:
+ dev_err(udc->dev,
+ "process queue failed for ep0 %s phase (%d)\n",
+ ep0state_name, ret);
+ break;
+ }
+ return ret;
+}
+
+static int usbf_handle_ep0_out_status_start(struct usbf_ep *ep0)
+{
+ struct usbf_udc *udc = ep0->udc;
+ struct usbf_req *req;
+
+ usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL,
+ USBF_EP0_ONAK,
+ USBF_EP0_PIDCLR);
+ ep0->is_in = 0;
+
+ req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue);
+ if (!req) {
+ usbf_ep0_fill_req(ep0, &udc->setup_reply, NULL, 0, NULL);
+ usbf_ep0_queue(ep0, &udc->setup_reply, GFP_ATOMIC);
+ } else {
+ if (req->req.length) {
+ dev_err(udc->dev,
+ "queued request length %u for ep0 out status phase\n",
+ req->req.length);
+ }
+ }
+ udc->ep0state = EP0_OUT_STATUS_PHASE;
+ return 0;
+}
+
+static int usbf_handle_ep0_in_status_start(struct usbf_ep *ep0)
+{
+ struct usbf_udc *udc = ep0->udc;
+ struct usbf_req *req;
+ int ret;
+
+ usbf_ep_reg_clrset(ep0, USBF_REG_EP0_CONTROL,
+ USBF_EP0_INAK,
+ USBF_EP0_INAK_EN | USBF_EP0_PIDCLR);
+ ep0->is_in = 1;
+
+ /* Queue request for status if needed */
+ req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue);
+ if (!req) {
+ if (ep0->delayed_status) {
+ TRACEEP(ep0,
+ "EP0_IN_STATUS_START_PHASE ep0->delayed_status set\n");
+ udc->ep0state = EP0_IN_STATUS_PHASE;
+ return 0;
+ }
+
+ usbf_ep0_fill_req(ep0, &udc->setup_reply, NULL,
+ 0, NULL);
+ usbf_ep0_queue(ep0, &udc->setup_reply,
+ GFP_ATOMIC);
+
+ req = list_first_entry_or_null(&ep0->queue, struct usbf_req, queue);
+ } else {
+ if (req->req.length) {
+ dev_err(udc->dev,
+ "queued request length %u for ep0 in status phase\n",
+ req->req.length);
+ }
+ }
+
+ ret = usbf_ep0_pio_in(ep0, req);
+ if (ret != -EINPROGRESS) {
+ usbf_ep_req_done(ep0, req, ret);
+ udc->ep0state = EP0_IN_STATUS_END_PHASE;
+ return 0;
+ }
+
+ udc->ep0state = EP0_IN_STATUS_PHASE;
+ return 0;
+}
+
+static void usbf_ep0_interrupt(struct usbf_ep *ep0)
+{
+ struct usbf_udc *udc = ep0->udc;
+ u32 sts, prev_sts;
+ int prev_ep0state;
+ int ret;
+
+ ep0->status = usbf_ep_reg_readl(ep0, USBF_REG_EP0_STATUS);
+ usbf_ep_reg_writel(ep0, USBF_REG_EP0_STATUS, ~ep0->status);
+
+ TRACEEP(ep0, "ep0 status=0x%08x, enable=%08x\n, ctrl=0x%08x\n",
+ ep0->status,
+ usbf_ep_reg_readl(ep0, USBF_REG_EP0_INT_ENA),
+ usbf_ep_reg_readl(ep0, USBF_REG_EP0_CONTROL));
+
+ sts = ep0->status & (USBF_EP0_SETUP_INT | USBF_EP0_IN_INT | USBF_EP0_OUT_INT |
+ USBF_EP0_OUT_NULL_INT | USBF_EP0_STG_START_INT |
+ USBF_EP0_STG_END_INT);
+
+ ret = 0;
+ do {
+ TRACEEP(ep0, "udc->ep0state=%d\n", udc->ep0state);
+
+ prev_sts = sts;
+ prev_ep0state = udc->ep0state;
+ switch (udc->ep0state) {
+ case EP0_IDLE:
+ if (!(sts & USBF_EP0_SETUP_INT))
+ break;
+
+ sts &= ~USBF_EP0_SETUP_INT;
+ TRACEEP(ep0, "handle setup\n");
+ ret = usbf_handle_ep0_setup(ep0);
+ break;
+
+ case EP0_IN_DATA_PHASE:
+ if (!(sts & USBF_EP0_IN_INT))
+ break;
+
+ sts &= ~USBF_EP0_IN_INT;
+ TRACEEP(ep0, "handle in data phase\n");
+ ret = usbf_handle_ep0_data_status(ep0,
+ "in data", EP0_OUT_STATUS_START_PHASE);
+ break;
+
+ case EP0_OUT_STATUS_START_PHASE:
+ if (!(sts & USBF_EP0_STG_START_INT))
+ break;
+
+ sts &= ~USBF_EP0_STG_START_INT;
+ TRACEEP(ep0, "handle out status start phase\n");
+ ret = usbf_handle_ep0_out_status_start(ep0);
+ break;
+
+ case EP0_OUT_STATUS_PHASE:
+ if (!(sts & (USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT)))
+ break;
+
+ sts &= ~(USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT);
+ TRACEEP(ep0, "handle out status phase\n");
+ ret = usbf_handle_ep0_data_status(ep0,
+ "out status",
+ EP0_OUT_STATUS_END_PHASE);
+ break;
+
+ case EP0_OUT_STATUS_END_PHASE:
+ if (!(sts & (USBF_EP0_STG_END_INT | USBF_EP0_SETUP_INT)))
+ break;
+
+ sts &= ~USBF_EP0_STG_END_INT;
+ TRACEEP(ep0, "handle out status end phase\n");
+ udc->ep0state = EP0_IDLE;
+ break;
+
+ case EP0_OUT_DATA_PHASE:
+ if (!(sts & (USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT)))
+ break;
+
+ sts &= ~(USBF_EP0_OUT_INT | USBF_EP0_OUT_NULL_INT);
+ TRACEEP(ep0, "handle out data phase\n");
+ ret = usbf_handle_ep0_data_status(ep0,
+ "out data", EP0_IN_STATUS_START_PHASE);
+ break;
+
+ case EP0_IN_STATUS_START_PHASE:
+ if (!(sts & USBF_EP0_STG_START_INT))
+ break;
+
+ sts &= ~USBF_EP0_STG_START_INT;
+ TRACEEP(ep0, "handle in status start phase\n");
+ ret = usbf_handle_ep0_in_status_start(ep0);
+ break;
+
+ case EP0_IN_STATUS_PHASE:
+ if (!(sts & USBF_EP0_IN_INT))
+ break;
+
+ sts &= ~USBF_EP0_IN_INT;
+ TRACEEP(ep0, "handle in status phase\n");
+ ret = usbf_handle_ep0_data_status(ep0,
+ "in status", EP0_IN_STATUS_END_PHASE);
+ break;
+
+ case EP0_IN_STATUS_END_PHASE:
+ if (!(sts & (USBF_EP0_STG_END_INT | USBF_EP0_SETUP_INT)))
+ break;
+
+ sts &= ~USBF_EP0_STG_END_INT;
+ TRACEEP(ep0, "handle in status end\n");
+ udc->ep0state = EP0_IDLE;
+ break;
+
+ default:
+ udc->ep0state = EP0_IDLE;
+ break;
+ }
+
+ if (ret) {
+ TRACEEP(ep0, "failed (%d)\n", ret);
+ /* Failure -> stall.
+ * This stall state will be automatically cleared when
+ * the IP receives the next SETUP packet
+ */
+ usbf_ep_stall(ep0, true);
+
+ /* Remove anything that was pending */
+ usbf_ep_nuke(ep0, -EPROTO);
+
+ udc->ep0state = EP0_IDLE;
+ break;
+ }
+
+ } while ((prev_ep0state != udc->ep0state) || (prev_sts != sts));
+
+ TRACEEP(ep0, "done udc->ep0state=%d, status=0x%08x. next=0x%08x\n",
+ udc->ep0state, sts,
+ usbf_ep_reg_readl(ep0, USBF_REG_EP0_STATUS));
+}
+
+static void usbf_epn_process_queue(struct usbf_ep *epn)
+{
+ int ret;
+
+ ret = usbf_ep_process_queue(epn);
+ switch (ret) {
+ case -ENOENT:
+ dev_warn(epn->udc->dev, "ep%u %s, no request available\n",
+ epn->id, epn->is_in ? "in" : "out");
+ break;
+ case -EINPROGRESS:
+ /* More data needs to be processed */
+ ret = 0;
+ break;
+ case 0:
+ /* All requests in the queue are processed */
+ break;
+ default:
+ dev_err(epn->udc->dev, "ep%u %s, process queue failed (%d)\n",
+ epn->id, epn->is_in ? "in" : "out", ret);
+ break;
+ }
+
+ if (ret) {
+ TRACEEP(epn, "ep%u %s failed (%d)\n", epn->id,
+ epn->is_in ? "in" : "out", ret);
+ usbf_ep_stall(epn, true);
+ usbf_ep_nuke(epn, ret);
+ }
+}
+
+static void usbf_epn_interrupt(struct usbf_ep *epn)
+{
+ u32 sts;
+ u32 ena;
+
+ epn->status = usbf_ep_reg_readl(epn, USBF_REG_EPN_STATUS);
+ ena = usbf_ep_reg_readl(epn, USBF_REG_EPN_INT_ENA);
+ usbf_ep_reg_writel(epn, USBF_REG_EPN_STATUS, ~(epn->status & ena));
+
+ TRACEEP(epn, "ep%u %s status=0x%08x, enable=%08x\n, ctrl=0x%08x\n",
+ epn->id, epn->is_in ? "in" : "out", epn->status, ena,
+ usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL));
+
+ if (epn->disabled) {
+ dev_warn(epn->udc->dev, "ep%u %s, interrupt while disabled\n",
+ epn->id, epn->is_in ? "in" : "out");
+ return;
+ }
+
+ sts = epn->status & ena;
+
+ if (sts & (USBF_EPN_IN_END_INT | USBF_EPN_IN_INT)) {
+ sts &= ~(USBF_EPN_IN_END_INT | USBF_EPN_IN_INT);
+ TRACEEP(epn, "ep%u %s process queue (in interrupts)\n",
+ epn->id, epn->is_in ? "in" : "out");
+ usbf_epn_process_queue(epn);
+ }
+
+ if (sts & (USBF_EPN_OUT_END_INT | USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT)) {
+ sts &= ~(USBF_EPN_OUT_END_INT | USBF_EPN_OUT_INT | USBF_EPN_OUT_NULL_INT);
+ TRACEEP(epn, "ep%u %s process queue (out interrupts)\n",
+ epn->id, epn->is_in ? "in" : "out");
+ usbf_epn_process_queue(epn);
+ }
+
+ TRACEEP(epn, "ep%u %s done status=0x%08x. next=0x%08x\n",
+ epn->id, epn->is_in ? "in" : "out",
+ sts, usbf_ep_reg_readl(epn, USBF_REG_EPN_STATUS));
+}
+
+static void usbf_ep_reset(struct usbf_ep *ep)
+{
+ ep->status = 0;
+ /* Remove anything that was pending */
+ usbf_ep_nuke(ep, -ESHUTDOWN);
+}
+
+static void usbf_reset(struct usbf_udc *udc)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(udc->ep); i++) {
+ if (udc->ep[i].disabled)
+ continue;
+
+ usbf_ep_reset(&udc->ep[i]);
+ }
+
+ if (usbf_reg_readl(udc, USBF_REG_USB_STATUS) & USBF_USB_SPEED_MODE)
+ udc->gadget.speed = USB_SPEED_HIGH;
+ else
+ udc->gadget.speed = USB_SPEED_FULL;
+
+ /* Remote wakeup feature must be disabled on USB bus reset */
+ udc->is_remote_wakeup = false;
+
+ /* Enable endpoint zero */
+ usbf_ep0_enable(&udc->ep[0]);
+
+ if (udc->driver) {
+ /* Signal the reset */
+ spin_unlock(&udc->lock);
+ usb_gadget_udc_reset(&udc->gadget, udc->driver);
+ spin_lock(&udc->lock);
+ }
+}
+
+static void usbf_driver_suspend(struct usbf_udc *udc)
+{
+ if (udc->is_usb_suspended) {
+ TRACE("already suspended\n");
+ return;
+ }
+
+ TRACE("do usb suspend\n");
+ udc->is_usb_suspended = true;
+
+ if (udc->driver && udc->driver->suspend) {
+ spin_unlock(&udc->lock);
+ udc->driver->suspend(&udc->gadget);
+ spin_lock(&udc->lock);
+
+ /* The datasheet tells to set the USB_CONTROL register SUSPEND
+ * bit when the USB bus suspend is detected.
+ * This bit stops the clocks (clocks for EPC, SIE, USBPHY) but
+ * these clocks seems not used only by the USB device. Some
+ * UARTs can be lost ...
+ * So, do not set the USB_CONTROL register SUSPEND bit.
+ */
+ }
+}
+
+static void usbf_driver_resume(struct usbf_udc *udc)
+{
+ if (!udc->is_usb_suspended)
+ return;
+
+ TRACE("do usb resume\n");
+ udc->is_usb_suspended = false;
+
+ if (udc->driver && udc->driver->resume) {
+ spin_unlock(&udc->lock);
+ udc->driver->resume(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+}
+
+static irqreturn_t usbf_epc_irq(int irq, void *_udc)
+{
+ struct usbf_udc *udc = (struct usbf_udc *)_udc;
+ unsigned long flags;
+ struct usbf_ep *ep;
+ u32 int_sts;
+ u32 int_en;
+ int i;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ int_en = usbf_reg_readl(udc, USBF_REG_USB_INT_ENA);
+ int_sts = usbf_reg_readl(udc, USBF_REG_USB_INT_STA) & int_en;
+ usbf_reg_writel(udc, USBF_REG_USB_INT_STA, ~int_sts);
+
+ TRACE("int_sts=0x%08x\n", int_sts);
+
+ if (int_sts & USBF_USB_RSUM_INT) {
+ TRACE("handle resume\n");
+ usbf_driver_resume(udc);
+ }
+
+ if (int_sts & USBF_USB_USB_RST_INT) {
+ TRACE("handle bus reset\n");
+ usbf_driver_resume(udc);
+ usbf_reset(udc);
+ }
+
+ if (int_sts & USBF_USB_SPEED_MODE_INT) {
+ if (usbf_reg_readl(udc, USBF_REG_USB_STATUS) & USBF_USB_SPEED_MODE)
+ udc->gadget.speed = USB_SPEED_HIGH;
+ else
+ udc->gadget.speed = USB_SPEED_FULL;
+ TRACE("handle speed change (%s)\n",
+ udc->gadget.speed == USB_SPEED_HIGH ? "High" : "Full");
+ }
+
+ if (int_sts & USBF_USB_EPN_INT(0)) {
+ usbf_driver_resume(udc);
+ usbf_ep0_interrupt(&udc->ep[0]);
+ }
+
+ for (i = 1; i < ARRAY_SIZE(udc->ep); i++) {
+ ep = &udc->ep[i];
+
+ if (int_sts & USBF_USB_EPN_INT(i)) {
+ usbf_driver_resume(udc);
+ usbf_epn_interrupt(ep);
+ }
+ }
+
+ if (int_sts & USBF_USB_SPND_INT) {
+ TRACE("handle suspend\n");
+ usbf_driver_suspend(udc);
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t usbf_ahb_epc_irq(int irq, void *_udc)
+{
+ struct usbf_udc *udc = (struct usbf_udc *)_udc;
+ unsigned long flags;
+ struct usbf_ep *epn;
+ u32 sysbint;
+ void (*ep_action)(struct usbf_ep *epn);
+ int i;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* Read and ack interrupts */
+ sysbint = usbf_reg_readl(udc, USBF_REG_AHBBINT);
+ usbf_reg_writel(udc, USBF_REG_AHBBINT, sysbint);
+
+ if ((sysbint & USBF_SYS_VBUS_INT) == USBF_SYS_VBUS_INT) {
+ if (usbf_reg_readl(udc, USBF_REG_EPCTR) & USBF_SYS_VBUS_LEVEL) {
+ TRACE("handle vbus (1)\n");
+ spin_unlock(&udc->lock);
+ usb_udc_vbus_handler(&udc->gadget, true);
+ usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED);
+ spin_lock(&udc->lock);
+ } else {
+ TRACE("handle vbus (0)\n");
+ udc->is_usb_suspended = false;
+ spin_unlock(&udc->lock);
+ usb_udc_vbus_handler(&udc->gadget, false);
+ usb_gadget_set_state(&udc->gadget,
+ USB_STATE_NOTATTACHED);
+ spin_lock(&udc->lock);
+ }
+ }
+
+ for (i = 1; i < ARRAY_SIZE(udc->ep); i++) {
+ if (sysbint & USBF_SYS_DMA_ENDINT_EPN(i)) {
+ epn = &udc->ep[i];
+ TRACEEP(epn,
+ "ep%u handle DMA complete. action=%ps\n",
+ epn->id, epn->bridge_on_dma_end);
+ ep_action = epn->bridge_on_dma_end;
+ if (ep_action) {
+ epn->bridge_on_dma_end = NULL;
+ ep_action(epn);
+ }
+ }
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static int usbf_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
+{
+ struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+ unsigned long flags;
+
+ dev_info(udc->dev, "start (driver '%s')\n", driver->driver.name);
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* hook up the driver */
+ udc->driver = driver;
+
+ /* Enable VBUS interrupt */
+ usbf_reg_writel(udc, USBF_REG_AHBBINTEN, USBF_SYS_VBUS_INTEN);
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static int usbf_udc_stop(struct usb_gadget *gadget)
+{
+ struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* Disable VBUS interrupt */
+ usbf_reg_writel(udc, USBF_REG_AHBBINTEN, 0);
+
+ udc->driver = NULL;
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ dev_info(udc->dev, "stopped\n");
+
+ return 0;
+}
+
+static int usbf_get_frame(struct usb_gadget *gadget)
+{
+ struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+
+ return USBF_USB_GET_FRAME(usbf_reg_readl(udc, USBF_REG_USB_ADDRESS));
+}
+
+static void usbf_attach(struct usbf_udc *udc)
+{
+ /* Enable USB signal to Function PHY
+ * D+ signal Pull-up
+ * Disable endpoint 0, it will be automatically enable when a USB reset
+ * is received.
+ * Disable the other endpoints
+ */
+ usbf_reg_clrset(udc, USBF_REG_USB_CONTROL,
+ USBF_USB_CONNECTB | USBF_USB_DEFAULT | USBF_USB_CONF,
+ USBF_USB_PUE2);
+
+ /* Enable reset and mode change interrupts */
+ usbf_reg_bitset(udc, USBF_REG_USB_INT_ENA,
+ USBF_USB_USB_RST_EN | USBF_USB_SPEED_MODE_EN | USBF_USB_RSUM_EN | USBF_USB_SPND_EN);
+}
+
+static void usbf_detach(struct usbf_udc *udc)
+{
+ int i;
+
+ /* Disable interrupts */
+ usbf_reg_writel(udc, USBF_REG_USB_INT_ENA, 0);
+
+ for (i = 0; i < ARRAY_SIZE(udc->ep); i++) {
+ if (udc->ep[i].disabled)
+ continue;
+
+ usbf_ep_reset(&udc->ep[i]);
+ }
+
+ /* Disable USB signal to Function PHY
+ * Do not Pull-up D+ signal
+ * Disable endpoint 0
+ * Disable the other endpoints
+ */
+ usbf_reg_clrset(udc, USBF_REG_USB_CONTROL,
+ USBF_USB_PUE2 | USBF_USB_DEFAULT | USBF_USB_CONF,
+ USBF_USB_CONNECTB);
+}
+
+static int usbf_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+ unsigned long flags;
+
+ TRACE("is_on=%d\n", is_on);
+
+ spin_lock_irqsave(&udc->lock, flags);
+ if (is_on)
+ usbf_attach(udc);
+ else
+ usbf_detach(udc);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static int usbf_udc_set_selfpowered(struct usb_gadget *gadget,
+ int is_selfpowered)
+{
+ struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ gadget->is_selfpowered = (is_selfpowered != 0);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static int usbf_udc_wakeup(struct usb_gadget *gadget)
+{
+ struct usbf_udc *udc = container_of(gadget, struct usbf_udc, gadget);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ if (!udc->is_remote_wakeup) {
+ TRACE("remote wakeup not allowed\n");
+ ret = -EINVAL;
+ goto end;
+ }
+
+ TRACE("do wakeup\n");
+
+ /* Send the resume signal */
+ usbf_reg_bitset(udc, USBF_REG_USB_CONTROL, USBF_USB_RSUM_IN);
+ usbf_reg_bitclr(udc, USBF_REG_USB_CONTROL, USBF_USB_RSUM_IN);
+
+ ret = 0;
+end:
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return ret;
+}
+
+static struct usb_gadget_ops usbf_gadget_ops = {
+ .get_frame = usbf_get_frame,
+ .pullup = usbf_pullup,
+ .udc_start = usbf_udc_start,
+ .udc_stop = usbf_udc_stop,
+ .set_selfpowered = usbf_udc_set_selfpowered,
+ .wakeup = usbf_udc_wakeup,
+};
+
+static int usbf_epn_check(struct usbf_ep *epn)
+{
+ const char *type_txt;
+ const char *buf_txt;
+ int ret = 0;
+ u32 ctrl;
+
+ ctrl = usbf_ep_reg_readl(epn, USBF_REG_EPN_CONTROL);
+
+ switch (ctrl & USBF_EPN_MODE_MASK) {
+ case USBF_EPN_MODE_BULK:
+ type_txt = "bulk";
+ if (epn->ep.caps.type_control || epn->ep.caps.type_iso ||
+ !epn->ep.caps.type_bulk || epn->ep.caps.type_int) {
+ dev_err(epn->udc->dev,
+ "ep%u caps mismatch, bulk expected\n", epn->id);
+ ret = -EINVAL;
+ }
+ break;
+ case USBF_EPN_MODE_INTR:
+ type_txt = "intr";
+ if (epn->ep.caps.type_control || epn->ep.caps.type_iso ||
+ epn->ep.caps.type_bulk || !epn->ep.caps.type_int) {
+ dev_err(epn->udc->dev,
+ "ep%u caps mismatch, int expected\n", epn->id);
+ ret = -EINVAL;
+ }
+ break;
+ case USBF_EPN_MODE_ISO:
+ type_txt = "iso";
+ if (epn->ep.caps.type_control || !epn->ep.caps.type_iso ||
+ epn->ep.caps.type_bulk || epn->ep.caps.type_int) {
+ dev_err(epn->udc->dev,
+ "ep%u caps mismatch, iso expected\n", epn->id);
+ ret = -EINVAL;
+ }
+ break;
+ default:
+ type_txt = "unknown";
+ dev_err(epn->udc->dev, "ep%u unknown type\n", epn->id);
+ ret = -EINVAL;
+ break;
+ }
+
+ if (ctrl & USBF_EPN_BUF_TYPE_DOUBLE) {
+ buf_txt = "double";
+ if (!usbf_ep_info[epn->id].is_double) {
+ dev_err(epn->udc->dev,
+ "ep%u buffer mismatch, double expected\n",
+ epn->id);
+ ret = -EINVAL;
+ }
+ } else {
+ buf_txt = "single";
+ if (usbf_ep_info[epn->id].is_double) {
+ dev_err(epn->udc->dev,
+ "ep%u buffer mismatch, single expected\n",
+ epn->id);
+ ret = -EINVAL;
+ }
+ }
+
+ dev_dbg(epn->udc->dev, "ep%u (%s) %s, %s buffer %u, checked %s\n",
+ epn->id, epn->ep.name, type_txt, buf_txt,
+ epn->ep.maxpacket_limit, ret ? "failed" : "ok");
+
+ return ret;
+}
+
+static int usbf_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usbf_udc *udc;
+ struct usbf_ep *ep;
+ unsigned int i;
+ int irq;
+ int ret;
+
+ udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+ if (!udc)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, udc);
+
+ udc->dev = dev;
+ spin_lock_init(&udc->lock);
+
+ udc->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(udc->regs))
+ return PTR_ERR(udc->regs);
+
+ devm_pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ dev_info(dev, "USBF version: %08x\n",
+ usbf_reg_readl(udc, USBF_REG_USBSSVER));
+
+ /* Resetting the PLL is handled via the clock driver as it has common
+ * registers with USB Host
+ */
+ usbf_reg_bitclr(udc, USBF_REG_EPCTR, USBF_SYS_EPC_RST);
+
+ /* modify in register gadget process */
+ udc->gadget.speed = USB_SPEED_FULL;
+ udc->gadget.max_speed = USB_SPEED_HIGH;
+ udc->gadget.ops = &usbf_gadget_ops;
+
+ udc->gadget.name = dev->driver->name;
+ udc->gadget.dev.parent = dev;
+ udc->gadget.ep0 = &udc->ep[0].ep;
+
+ /* The hardware DMA controller needs dma addresses aligned on 32bit.
+ * A fallback to pio is done if DMA addresses are not aligned.
+ */
+ udc->gadget.quirk_avoids_skb_reserve = 1;
+
+ INIT_LIST_HEAD(&udc->gadget.ep_list);
+ /* we have a canned request structure to allow sending packets as reply
+ * to get_status requests
+ */
+ INIT_LIST_HEAD(&udc->setup_reply.queue);
+
+ for (i = 0; i < ARRAY_SIZE(udc->ep); i++) {
+ ep = &udc->ep[i];
+
+ if (!(usbf_reg_readl(udc, USBF_REG_USBSSCONF) &
+ USBF_SYS_EP_AVAILABLE(i))) {
+ continue;
+ }
+
+ INIT_LIST_HEAD(&ep->queue);
+
+ ep->id = i;
+ ep->disabled = 1;
+ ep->udc = udc;
+ ep->ep.ops = &usbf_ep_ops;
+ ep->ep.name = usbf_ep_info[i].name;
+ ep->ep.caps = usbf_ep_info[i].caps;
+ usb_ep_set_maxpacket_limit(&ep->ep,
+ usbf_ep_info[i].maxpacket_limit);
+
+ if (ep->id == 0) {
+ ep->regs = ep->udc->regs + USBF_BASE_EP0;
+ } else {
+ ep->regs = ep->udc->regs + USBF_BASE_EPN(ep->id - 1);
+ ret = usbf_epn_check(ep);
+ if (ret)
+ return ret;
+ if (usbf_reg_readl(udc, USBF_REG_USBSSCONF) &
+ USBF_SYS_DMA_AVAILABLE(i)) {
+ ep->dma_regs = ep->udc->regs +
+ USBF_BASE_DMA_EPN(ep->id - 1);
+ }
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ }
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ ret = devm_request_irq(dev, irq, usbf_epc_irq, 0, "usbf-epc", udc);
+ if (ret) {
+ dev_err(dev, "cannot request irq %d err %d\n", irq, ret);
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 1);
+ if (irq < 0)
+ return irq;
+ ret = devm_request_irq(dev, irq, usbf_ahb_epc_irq, 0, "usbf-ahb-epc", udc);
+ if (ret) {
+ dev_err(dev, "cannot request irq %d err %d\n", irq, ret);
+ return ret;
+ }
+
+ usbf_reg_bitset(udc, USBF_REG_AHBMCTR, USBF_SYS_WBURST_TYPE);
+
+ usbf_reg_bitset(udc, USBF_REG_USB_CONTROL,
+ USBF_USB_INT_SEL | USBF_USB_SOF_RCV | USBF_USB_SOF_CLK_MODE);
+
+ ret = usb_add_gadget_udc(dev, &udc->gadget);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int usbf_remove(struct platform_device *pdev)
+{
+ struct usbf_udc *udc = platform_get_drvdata(pdev);
+
+ usb_del_gadget_udc(&udc->gadget);
+
+ pm_runtime_put(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id usbf_match[] = {
+ { .compatible = "renesas,rzn1-usbf" },
+ {} /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, usbf_match);
+
+static struct platform_driver udc_driver = {
+ .driver = {
+ .name = "usbf_renesas",
+ .owner = THIS_MODULE,
+ .of_match_table = usbf_match,
+ },
+ .probe = usbf_probe,
+ .remove = usbf_remove,
+};
+
+module_platform_driver(udc_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 & RZ/N1 USB Function driver");
+MODULE_LICENSE("GPL");
Add support for the Renesas USBF controller. This controller is an USB2.0 UDC controller available in the Renesas r9a06g032 SoC (RZ/N1 family). Signed-off-by: Herve Codina <herve.codina@bootlin.com> --- drivers/usb/gadget/udc/Kconfig | 11 + drivers/usb/gadget/udc/Makefile | 1 + drivers/usb/gadget/udc/renesas_usbf.c | 3420 +++++++++++++++++++++++++ 3 files changed, 3432 insertions(+) create mode 100644 drivers/usb/gadget/udc/renesas_usbf.c