[v2,5/5] dt-bindings: iio: cleanup examples - indentation

Message ID	20230124081037.31013-5-krzysztof.kozlowski@linaro.org (mailing list archive)
State	Awaiting Upstream
Delegated to:	Geert Uytterhoeven
Headers	show Return-Path: <linux-renesas-soc-owner@vger.kernel.org> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Lars-Peter Clausen <lars@metafoo.de>, Michael Hennerich <Michael.Hennerich@analog.com>, Jonathan Cameron <jic23@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lucas Stankus <lucas.p.stankus@gmail.com>, Puranjay Mohan <puranjay12@gmail.com>, Dmitry Rokosov <ddrokosov@sberdevices.ru>, Alexandru Tachici <alexandru.tachici@analog.com>, Marcelo Schmitt <marcelo.schmitt1@gmail.com>, Renato Lui Geh <renatogeh@gmail.com>, Eugen Hristev <eugen.hristev@microchip.com>, Nicolas Ferre <nicolas.ferre@microchip.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Claudiu Beznea <claudiu.beznea@microchip.com>, Andreas Klinger <ak@it-klinger.de>, Marcus Folkesson <marcus.folkesson@gmail.com>, Kent Gustavsson <kent@minoris.se>, Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>, Alim Akhtar <alim.akhtar@samsung.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Oleksij Rempel <linux@rempel-privat.de>, kernel@pengutronix.de, =?utf-8?q?N?= =?utf-8?q?uno_S=C3=A1?= <nuno.sa@analog.com>, Nishant Malpani <nish.malpani25@gmail.com>, Rui Miguel Silva <rmfrfs@gmail.com>, Dragos Bogdan <dragos.bogdan@analog.com>, Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>, Lorenzo Bianconi <lorenzo@kernel.org>, Benson Leung <bleung@chromium.org>, Guenter Roeck <groeck@chromium.org>, Stefan Popa <stefan.popa@analog.com>, Robert Yang <decatf@gmail.com>, Sean Nyekjaer <sean@geanix.com>, Artur Rojek <contact@artur-rojek.eu>, Miquel Raynal <miquel.raynal@bootlin.com>, Philippe Reynes <tremyfr@yahoo.fr>, Alexandru Lazar <alazar@startmail.com>, Linus Walleij <linus.walleij@linaro.org>, Caleb Connolly <caleb.connolly@linaro.org>, Fabrice Gasnier <fabrice.gasnier@foss.st.com>, Stefan Agner <stefan@agner.ch>, Daniel Baluta <daniel.baluta@nxp.com>, Harald Geyer <harald@ccbib.org>, Eugene Zaikonnikov <ez@norophonic.com>, Phil Reid <preid@electromag.com.au>, Matt Ranostay <matt.ranostay@konsulko.com>, Stephen Boyd <swboyd@chromium.org>, Sankar Velliangiri <navin@linumiz.com>, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-renesas-soc@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, chrome-platform@lists.linux.dev Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Rob Herring <robh@kernel.org> Subject: [PATCH v2 5/5] dt-bindings: iio: cleanup examples - indentation Date: Tue, 24 Jan 2023 09:10:37 +0100 Message-Id: <20230124081037.31013-5-krzysztof.kozlowski@linaro.org> In-Reply-To: <20230124081037.31013-1-krzysztof.kozlowski@linaro.org> References: <20230124081037.31013-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	[v2,1/5] dt-bindings: iio: drop unneeded quotes \| expand [v2,1/5] dt-bindings: iio: drop unneeded quotes [v2,2/5] dt-bindings: iio: minor whitespace cleanups [v2,3/5] dt-bindings: iio: correct node names in examples [v2,4/5] dt-bindings: iio: use lowercase hex in examples [v2,5/5] dt-bindings: iio: cleanup examples - indentation

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml index 6b03c4efbb08..c07261c71013 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -58,34 +58,34 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; - /* Example for a I2C device node */ - accelerometer@1d { - compatible = "adi,adxl355"; - reg = <0x1d>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "DRDY"; - }; + /* Example for a I2C device node */ + accelerometer@1d { + compatible = "adi,adxl355"; + reg = <0x1d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; }; + }; - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - spi { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; - accelerometer@0 { - compatible = "adi,adxl355"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "DRDY"; - }; + accelerometer@0 { + compatible = "adi,adxl355"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml index 73a5c8f814cc..62465e36a590 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -37,32 +37,32 @@ unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; - /* Example for a I2C device node */ - accelerometer@53 { - compatible = "adi,adxl372"; - reg = <0x53>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl372"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; }; + }; - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - spi0 { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; - accelerometer@0 { - compatible = "adi,adxl372"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; + accelerometer@0 { + compatible = "adi,adxl372"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml index b97559f23b3a..ce7ba634643c 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml @@ -44,11 +44,11 @@ examples: #size-cells = <0>; adc@2f { - compatible = "adi,ad7091r5"; - reg = <0x2f>; + compatible = "adi,ad7091r5"; + reg = <0x2f>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 1d965124c488..d521d516088b 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -100,25 +100,25 @@ unevaluatedProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - - adc@0 { - compatible = "adi,ad7192"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpol; - spi-cpha; - clocks = <&ad7192_mclk>; - clock-names = "mclk"; - interrupts = <25 0x2>; - interrupt-parent = <&gpio>; - dvdd-supply = <&dvdd>; - avdd-supply = <&avdd>; - - adi,refin2-pins-enable; - adi,rejection-60-Hz-enable; - adi,buffer-enable; - adi,burnout-currents-enable; + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7192"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + clocks = <&ad7192_mclk>; + clock-names = "mclk"; + interrupts = <25 0x2>; + interrupt-parent = <&gpio>; + dvdd-supply = <&dvdd>; + avdd-supply = <&avdd>; + + adi,refin2-pins-enable; + adi,rejection-60-Hz-enable; + adi,buffer-enable; + adi,burnout-currents-enable; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index b05652dfd4a2..7fa46df1f4fb 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -117,25 +117,25 @@ examples: #size-cells = <0>; adc@0 { - compatible = "adi,ad7606-8"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpol; - spi-cpha; - - avcc-supply = <&adc_vref>; - - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio>; - - adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; - adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, - <&gpio 23 GPIO_ACTIVE_HIGH>, - <&gpio 26 GPIO_ACTIVE_HIGH>; - standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - adi,sw-mode; + compatible = "adi,ad7606-8"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + + avcc-supply = <&adc_vref>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, + <&gpio 23 GPIO_ACTIVE_HIGH>, + <&gpio 26 GPIO_ACTIVE_HIGH>; + standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + adi,sw-mode; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml index 29641ce7175b..433ed2c9295f 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml @@ -57,17 +57,17 @@ additionalProperties: false examples: - | i2c { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - adc1: adc@28 { - reg = <0x28>; - compatible = "adi,ad7991"; - interrupts = <13 2>; - interrupt-parent = <&gpio6>; + adc1: adc@28 { + reg = <0x28>; + compatible = "adi,ad7991"; + interrupts = <13 2>; + interrupt-parent = <&gpio6>; - vcc-supply = <&vcc_3v3>; - vref-supply = <&adc_vref>; + vcc-supply = <&vcc_3v3>; + vref-supply = <&adc_vref>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index 2d72ff6bcbc0..7aa748d6b7a0 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -64,10 +64,10 @@ examples: #size-cells = <0>; adc@0 { - compatible = "adi,ad9467"; - reg = <0>; - clocks = <&adc_clk>; - clock-names = "adc-clk"; + compatible = "adi,ad9467"; + reg = <0>; + clocks = <&adc_clk>; + clock-names = "adc-clk"; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index 8e25773d69be..9996dd93f84b 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -51,11 +51,11 @@ additionalProperties: false examples: - | axi-adc@44a00000 { - compatible = "adi,axi-adc-10.0.a"; - reg = <0x44a00000 0x10000>; - dmas = <&rx_dma 0>; - dma-names = "rx"; + compatible = "adi,axi-adc-10.0.a"; + reg = <0x44a00000 0x10000>; + dmas = <&rx_dma 0>; + dma-names = "rx"; - adi,adc-dev = <&spi_adc>; + adi,adc-dev = <&spi_adc>; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml index b71c951e6d02..9cd0fd539782 100644 --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml @@ -78,14 +78,14 @@ examples: #include <dt-bindings/iio/adc/ingenic,adc.h> adc@10070000 { - compatible = "ingenic,jz4740-adc"; - #io-channel-cells = <1>; + compatible = "ingenic,jz4740-adc"; + #io-channel-cells = <1>; - reg = <0x10070000 0x30>; + reg = <0x10070000 0x30>; - clocks = <&cgu JZ4740_CLK_ADC>; - clock-names = "adc"; + clocks = <&cgu JZ4740_CLK_ADC>; + clock-names = "adc"; - interrupt-parent = <&intc>; - interrupts = <18>; + interrupt-parent = <&intc>; + interrupts = <18>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml index d0a7ed26d9ea..e4b362113509 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml @@ -54,8 +54,8 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; maxadc: adc@0 { compatible = "maxim,max1027"; reg = <0>; diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml index 58b12fe8070c..ef8d51e74c08 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -54,8 +54,8 @@ examples: - | #include <dt-bindings/gpio/gpio.h> spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; adc@0 { compatible = "maxim,max1241"; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml index d186b713d6a7..58ea1ca4a5ee 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml @@ -160,7 +160,7 @@ examples: }; ref_muxoff: adc-channel@f { reg = <0x00 0x0f>; - }; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml index c8cbfd3444be..b3a626389870 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml @@ -40,12 +40,12 @@ additionalProperties: false examples: - | pmic { - #address-cells = <1>; - #size-cells = <0>; - - pmic_rradc: adc@4500 { - compatible = "qcom,pmi8998-rradc"; - reg = <0x4500>; - #io-channel-cells = <1>; - }; + #address-cells = <1>; + #size-cells = <0>; + + pmic_rradc: adc@4500 { + compatible = "qcom,pmi8998-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index dca6cfe1e88e..582d0a03b814 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -142,7 +142,7 @@ examples: pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; - }; + }; }; - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index 2c3c2cf2145c..2127d639a768 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -104,12 +104,12 @@ examples: #address-cells = <1>; #size-cells = <0>; channel@0 { - reg = <0>; + reg = <0>; }; channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <5>; + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; }; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml index 32c52f9fe18b..866a05c9db36 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml @@ -83,36 +83,36 @@ examples: #size-cells = <0>; channel@0 { - reg = <0>; + reg = <0>; }; channel@1 { - reg = <1>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@2 { - reg = <2>; + reg = <2>; }; channel@3 { - reg = <3>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@4 { - reg = <4>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@5 { - reg = <5>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@6 { - reg = <6>; + reg = <6>; }; channel@7 { - reg = <7>; + reg = <7>; }; }; }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index fee0f023a8c8..96340a05754c 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -192,26 +192,26 @@ additionalProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - ad3552r@0 { - compatible = "adi,ad3552r"; - reg = <0>; - spi-max-frequency = <20000000>; - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - adi,output-range-microvolt = <0 10000000>; - }; - channel@1 { - reg = <1>; - custom-output-range-config { - adi,gain-offset = <5>; - adi,gain-scaling-p-inv-log2 = <1>; - adi,gain-scaling-n-inv-log2 = <2>; - adi,rfb-ohms = <1>; - }; + #address-cells = <1>; + #size-cells = <0>; + ad3552r@0 { + compatible = "adi,ad3552r"; + reg = <0>; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,output-range-microvolt = <0 10000000>; + }; + channel@1 { + reg = <1>; + custom-output-range-config { + adi,gain-offset = <5>; + adi,gain-scaling-p-inv-log2 = <1>; + adi,gain-scaling-n-inv-log2 = <2>; + adi,rfb-ohms = <1>; + }; }; }; }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml index 3c8784a54d2c..212c936bab8d 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml @@ -51,15 +51,15 @@ additionalProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - ad5766@0 { - compatible = "adi,ad5766"; - output-range-microvolts = <(-5000000) 5000000>; - reg = <0>; - spi-cpol; - spi-max-frequency = <1000000>; - reset-gpios = <&gpio 22 0>; - }; - }; + ad5766@0 { + compatible = "adi,ad5766"; + output-range-microvolts = <(-5000000) 5000000>; + reg = <0>; + spi-cpol; + spi-max-frequency = <1000000>; + reset-gpios = <&gpio 22 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 8e7da0de918f..82b0eed6a7b7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -147,49 +147,49 @@ unevaluatedProperties: false examples: - | - spi { - #address-cells = <1>; - #size-cells = <0>; - - ad5770r@0 { - compatible = "adi,ad5770r"; - reg = <0>; - spi-max-frequency = <1000000>; - vref-supply = <&vref>; - adi,external-resistor; - reset-gpios = <&gpio 22 0>; - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - adi,range-microamp = <0 300000>; - }; - - channel@1 { - reg = <1>; - adi,range-microamp = <0 140000>; - }; - - channel@2 { - reg = <2>; - adi,range-microamp = <0 55000>; - }; - - channel@3 { - reg = <3>; - adi,range-microamp = <0 45000>; - }; - - channel@4 { - reg = <4>; - adi,range-microamp = <0 45000>; - }; - - channel@5 { - reg = <5>; - adi,range-microamp = <0 45000>; - }; - }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad5770r@0 { + compatible = "adi,ad5770r"; + reg = <0>; + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + adi,external-resistor; + reset-gpios = <&gpio 22 0>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + adi,range-microamp = <0 300000>; + }; + + channel@1 { + reg = <1>; + adi,range-microamp = <0 140000>; + }; + + channel@2 { + reg = <2>; + adi,range-microamp = <0 55000>; + }; + + channel@3 { + reg = <3>; + adi,range-microamp = <0 45000>; + }; + + channel@4 { + reg = <4>; + adi,range-microamp = <0 45000>; + }; + + channel@5 { + reg = <5>; + adi,range-microamp = <0 45000>; + }; }; + }; ... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml index 15cc6bf59b13..f22ef710ecde 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml @@ -116,32 +116,32 @@ examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - ltc2688: ltc2688@0 { - compatible = "adi,ltc2688"; - reg = <0>; - - vcc-supply = <&vcc>; - iovcc-supply = <&vcc>; - vref-supply = <&vref>; - - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - adi,toggle-mode; - adi,overrange; - }; - - channel@1 { - reg = <1>; - adi,output-range-microvolt = <0 10000000>; - - clocks = <&clock_tgp3>; - adi,toggle-dither-input = <2>; - }; - }; + #address-cells = <1>; + #size-cells = <0>; + ltc2688: ltc2688@0 { + compatible = "adi,ltc2688"; + reg = <0>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + vref-supply = <&vref>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + adi,overrange; + }; + + channel@1 { + reg = <1>; + adi,output-range-microvolt = <0 10000000>; + + clocks = <&clock_tgp3>; + adi,toggle-dither-input = <2>; + }; + }; }; ... diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml index c9e3be3b5754..733edc7d6d17 100644 --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml @@ -64,14 +64,14 @@ examples: }; spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - dac@0 { - compatible = "lltc,ltc2632-l12"; - reg = <0>; /* CS0 */ - spi-max-frequency = <1000000>; - vref-supply = <&vref>; - }; + dac@0 { + compatible = "lltc,ltc2632-l12"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + }; }; ... diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml index a0a5e5919987..1cb2adaf66f9 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -58,11 +58,11 @@ examples: #size-cells = <0>; frequency@0 { - compatible = "adi,adf4371"; - reg = <0>; - spi-max-frequency = <1000000>; - clocks = <&adf4371_clkin>; - clock-names = "clkin"; + compatible = "adi,adf4371"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adf4371_clkin>; + clock-names = "clkin"; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml index 0ae2464b9bc4..3d94dd4612c4 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml @@ -50,13 +50,13 @@ examples: #address-cells = <1>; #size-cells = <0>; gyro@0 { - compatible = "adi,adxrs290"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpol; - spi-cpha; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; + compatible = "adi,adxrs290"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml index 052dccbb5eea..297d519d68f2 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml @@ -70,15 +70,15 @@ examples: #size-cells = <0>; gyroscope@20 { - compatible = "nxp,fxas21002c"; - reg = <0x20>; + compatible = "nxp,fxas21002c"; + reg = <0x20>; - vdd-supply = <&reg_peri_3p15v>; - vddio-supply = <&reg_peri_3p15v>; + vdd-supply = <&reg_peri_3p15v>; + vddio-supply = <&reg_peri_3p15v>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; }; }; spi { @@ -86,13 +86,13 @@ examples: #size-cells = <0>; gyroscope@0 { - compatible = "nxp,fxas21002c"; - reg = <0x0>; + compatible = "nxp,fxas21002c"; + reg = <0x0>; - spi-max-frequency = <2000000>; + spi-max-frequency = <2000000>; - interrupt-parent = <&gpio2>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT2"; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; }; }; diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index a36173b0c654..a2bc1fa92da0 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -36,11 +36,11 @@ additionalProperties: false examples: - | i2c { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - humidity@40 { - compatible = "ti,hdc2010"; - reg = <0x40>; - }; + humidity@40 { + compatible = "ti,hdc2010"; + reg = <0x40>; + }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml index 5dbfae80bb28..c73533c54588 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -114,17 +114,17 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> spi { - #address-cells = <1>; - #size-cells = <0>; - - adis16475: adis16475-3@0 { - compatible = "adi,adis16475-3"; - reg = <0>; - spi-cpha; - spi-cpol; - spi-max-frequency = <2000000>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio>; - }; + #address-cells = <1>; + #size-cells = <0>; + + adis16475: adis16475-3@0 { + compatible = "adi,adis16475-3"; + reg = <0>; + spi-cpha; + spi-cpol; + spi-max-frequency = <2000000>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + }; }; ... diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index a0760382548d..47cfba939ca6 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -64,16 +64,16 @@ examples: #size-cells = <0>; bmi160@68 { - compatible = "bosch,bmi160"; - reg = <0x68>; - vdd-supply = <&pm8916_l17>; - vddio-supply = <&pm8916_l6>; - interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; - mount-matrix = "0", "1", "0", - "-1", "0", "0", - "0", "0", "1"; + compatible = "bosch,bmi160"; + reg = <0x68>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; }; }; - | @@ -84,11 +84,11 @@ examples: #size-cells = <0>; bmi160@0 { - compatible = "bosch,bmi160"; - reg = <0>; - spi-max-frequency = <10000000>; - interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT2"; + compatible = "bosch,bmi160"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 3ecfb3f086bc..7cd05bcbee31 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -70,12 +70,12 @@ examples: #size-cells = <0>; icm42605@68 { - compatible = "invensense,icm42605"; - reg = <0x68>; - interrupt-parent = <&gpio2>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&vdd>; - vddio-supply = <&vddio>; + compatible = "invensense,icm42605"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; }; }; - | @@ -86,14 +86,14 @@ examples: #size-cells = <0>; icm42602@0 { - compatible = "invensense,icm42602"; - reg = <0>; - spi-max-frequency = <24000000>; - spi-cpha; - spi-cpol; - interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&vdd>; - vddio-supply = <&vddio>; + compatible = "invensense,icm42602"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml index db6a145840f7..688100b240bc 100644 --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -54,12 +54,12 @@ examples: #size-cells = <0>; fxos8700@1e { - compatible = "nxp,fxos8700"; - reg = <0x1e>; + compatible = "nxp,fxos8700"; + reg = <0x1e>; - interrupt-parent = <&gpio2>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; }; }; - | @@ -70,12 +70,12 @@ examples: #size-cells = <0>; fxos8700@0 { - compatible = "nxp,fxos8700"; - reg = <0>; + compatible = "nxp,fxos8700"; + reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT2"; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; }; }; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml index 9438fffaf0ba..877226e9219b 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml @@ -91,12 +91,12 @@ examples: #size-cells = <0>; magnetometer@2e { - compatible = "yamaha,yas530"; - reg = <0x2e>; - vdd-supply = <&ldo1_reg>; - iovdd-supply = <&ldo2_reg>; - reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + iovdd-supply = <&ldo2_reg>; + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; }; }; @@ -105,8 +105,8 @@ examples: #size-cells = <0>; magnetometer@2e { - compatible = "yamaha,yas539"; - reg = <0x2e>; - vdd-supply = <&ldo1_reg>; + compatible = "yamaha,yas539"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; }; }; diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 256f537840e4..63885af6a74b 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -61,15 +61,15 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { - #address-cells = <1>; - #size-cells = <0>; - pressure@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - interrupt-parent = <&gpio0>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - vddd-supply = <&foo>; - vdda-supply = <&bar>; - }; + #address-cells = <1>; + #size-cells = <0>; + pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; + }; }; diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml index 710d3b9a86d9..c999994e19e3 100644 --- a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml @@ -60,7 +60,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - lightning@0 { + lightning@0 { compatible = "ams,as3935"; reg = <0>; spi-max-frequency = <400000>; diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 3e5b7b47bcdc..f44fc32ce87e 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -472,75 +472,74 @@ examples: #size-cells = <0>; temperature-sensor@0 { - compatible = "adi,ltc2983"; - reg = <0>; - - #address-cells = <1>; - #size-cells = <0>; - - interrupts = <20 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio>; - - thermocouple@18 { - reg = <18>; - adi,sensor-type = <8>; //Type B - adi,sensor-oc-current-microamp = <10>; - adi,cold-junction-handle = <&diode5>; - }; - - diode5: diode@5 { - reg = <5>; - adi,sensor-type = <28>; - }; - - rsense2: rsense@2 { - reg = <2>; - adi,sensor-type = <29>; - adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms - }; - - rtd@14 { - reg = <14>; - adi,sensor-type = <15>; //PT1000 - /*2-wire, internal gnd, no current rotation*/ - adi,number-of-wires = <2>; - adi,rsense-share; - adi,excitation-current-microamp = <500>; - adi,rsense-handle = <&rsense2>; - }; - - adc@10 { - reg = <10>; - adi,sensor-type = <30>; - adi,single-ended; - }; - - thermistor@12 { - reg = <12>; - adi,sensor-type = <26>; //Steinhart - adi,rsense-handle = <&rsense2>; - adi,custom-steinhart = <0x00f371ec 0x12345678 - 0x2c0f8733 0x10018c66 0xa0feaccd - 0x90021d99>; //6 entries - }; - - thermocouple@20 { - reg = <20>; - adi,sensor-type = <9>; //custom thermocouple - adi,single-ended; - adi,custom-thermocouple = - /bits/ 64 <(-50220000) 0>, - /bits/ 64 <(-30200000) 99100000>, - /bits/ 64 <(-5300000) 135400000>, - /bits/ 64 <0 273150000>, - /bits/ 64 <40200000 361200000>, - /bits/ 64 <55300000 522100000>, - /bits/ 64 <88300000 720300000>, - /bits/ 64 <132200000 811200000>, - /bits/ 64 <188700000 922500000>, - /bits/ 64 <460400000 1000000000>; //10 pairs - }; - + compatible = "adi,ltc2983"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + + thermocouple@18 { + reg = <18>; + adi,sensor-type = <8>; //Type B + adi,sensor-oc-current-microamp = <10>; + adi,cold-junction-handle = <&diode5>; + }; + + diode5: diode@5 { + reg = <5>; + adi,sensor-type = <28>; + }; + + rsense2: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms + }; + + rtd@14 { + reg = <14>; + adi,sensor-type = <15>; //PT1000 + /*2-wire, internal gnd, no current rotation*/ + adi,number-of-wires = <2>; + adi,rsense-share; + adi,excitation-current-microamp = <500>; + adi,rsense-handle = <&rsense2>; + }; + + adc@10 { + reg = <10>; + adi,sensor-type = <30>; + adi,single-ended; + }; + + thermistor@12 { + reg = <12>; + adi,sensor-type = <26>; //Steinhart + adi,rsense-handle = <&rsense2>; + adi,custom-steinhart = <0x00f371ec 0x12345678 + 0x2c0f8733 0x10018c66 0xa0feaccd + 0x90021d99>; //6 entries + }; + + thermocouple@20 { + reg = <20>; + adi,sensor-type = <9>; //custom thermocouple + adi,single-ended; + adi,custom-thermocouple = + /bits/ 64 <(-50220000) 0>, + /bits/ 64 <(-30200000) 99100000>, + /bits/ 64 <(-5300000) 135400000>, + /bits/ 64 <0 273150000>, + /bits/ 64 <40200000 361200000>, + /bits/ 64 <55300000 522100000>, + /bits/ 64 <88300000 720300000>, + /bits/ 64 <132200000 811200000>, + /bits/ 64 <188700000 922500000>, + /bits/ 64 <460400000 1000000000>; //10 pairs + }; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml index 66394e17fcc8..7cc365e0ebc8 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml @@ -44,11 +44,11 @@ examples: #size-cells = <0>; temperature-sensor@0 { - compatible = "maxim,max31865"; - reg = <0>; - spi-max-frequency = <400000>; - spi-cpha; - maxim,3-wire; + compatible = "maxim,max31865"; + reg = <0>; + spi-max-frequency = <400000>; + spi-cpha; + maxim,3-wire; }; }; ...

[v2,5/5] dt-bindings: iio: cleanup examples - indentation

Commit Message

Patch