@@ -141,8 +141,11 @@ void __drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc,
drm_property_blob_get(state->degamma_lut);
if (state->ctm)
drm_property_blob_get(state->ctm);
+ if (state->shaper_lut)
+ drm_property_blob_get(state->shaper_lut);
if (state->gamma_lut)
drm_property_blob_get(state->gamma_lut);
+
state->mode_changed = false;
state->active_changed = false;
state->planes_changed = false;
@@ -214,6 +217,7 @@ void __drm_atomic_helper_crtc_destroy_state(struct drm_crtc_state *state)
drm_property_blob_put(state->mode_blob);
drm_property_blob_put(state->degamma_lut);
drm_property_blob_put(state->ctm);
+ drm_property_blob_put(state->shaper_lut);
drm_property_blob_put(state->gamma_lut);
}
EXPORT_SYMBOL(__drm_atomic_helper_crtc_destroy_state);
@@ -430,6 +430,14 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
&replaced);
state->color_mgmt_changed |= replaced;
return ret;
+ } else if (property == config->shaper_lut_property) {
+ ret = drm_atomic_replace_property_blob_from_id(dev,
+ &state->shaper_lut,
+ val,
+ -1, sizeof(struct drm_color_lut),
+ &replaced);
+ state->color_mgmt_changed |= replaced;
+ return ret;
} else if (property == config->gamma_lut_property) {
ret = drm_atomic_replace_property_blob_from_id(dev,
&state->gamma_lut,
@@ -481,6 +489,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
*val = (state->degamma_lut) ? state->degamma_lut->base.id : 0;
else if (property == config->ctm_property)
*val = (state->ctm) ? state->ctm->base.id : 0;
+ else if (property == config->shaper_lut_property)
+ *val = (state->shaper_lut) ? state->shaper_lut->base.id : 0;
else if (property == config->gamma_lut_property)
*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
else if (property == config->prop_out_fence_ptr)
@@ -69,6 +69,24 @@
* boot-up state too. Drivers can access the blob for the color conversion
* matrix through &drm_crtc_state.ctm.
*
+ * “SHAPER_LUT”:
+ * Blob property to set the shaper lut shaping pixel data after the color
+ * transformation matrix and before applying 3D Lookup Table (3D LUT). It
+ * can be used to delinearize content to get an effective 3D LUT mapping.
+ * The data is interpreted as an array of &struct drm_color_lut elements.
+ *
+ * Setting this to NULL (blob property value set to 0) means the output
+ * color is identical to the input color. This is generally the driver
+ * boot-up state too. Drivers can access this blob through
+ * &drm_crtc_state.gamma_lut.
+ *
+ * “SHAPER_LUT_SIZE”:
+ * Unsigned range property to give the size of the shaper lookup table to
+ * be set on the SHAPER_LUT property (the size depends on the underlying
+ * hardware). If drivers support multiple LUT sizes then they should
+ * publish the largest size, and sub-sample smaller sized LUTs
+ * appropriately.
+ *
* “GAMMA_LUT”:
* Blob property to set the gamma lookup table (LUT) mapping pixel data
* after the transformation matrix to data sent to the connector. The
@@ -962,8 +962,11 @@ static int setcmap_atomic(struct fb_cmap *cmap, struct fb_info *info)
replaced = drm_property_replace_blob(&crtc_state->degamma_lut,
NULL);
replaced |= drm_property_replace_blob(&crtc_state->ctm, NULL);
+ replaced |= drm_property_replace_blob(&crtc_state->shaper_lut,
+ NULL);
replaced |= drm_property_replace_blob(&crtc_state->gamma_lut,
gamma_lut);
+
crtc_state->color_mgmt_changed |= replaced;
}
@@ -353,6 +353,20 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
return -ENOMEM;
dev->mode_config.ctm_property = prop;
+ prop = drm_property_create(dev,
+ DRM_MODE_PROP_BLOB,
+ "SHAPER_LUT", 0);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.shaper_lut_property = prop;
+
+ prop = drm_property_create_range(dev,
+ DRM_MODE_PROP_IMMUTABLE,
+ "SHAPER_LUT_SIZE", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.shaper_lut_size_property = prop;
+
prop = drm_property_create(dev,
DRM_MODE_PROP_BLOB,
"GAMMA_LUT", 0);
@@ -152,8 +152,9 @@ struct drm_crtc_state {
bool zpos_changed : 1;
/**
* @color_mgmt_changed: Color management properties have changed
- * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and
- * drivers to steer the atomic commit control flow.
+ * (@shaper_lut, @gamma_lut, @degamma_lut or @ctm). Used by
+ * the atomic helpers and drivers to steer the atomic commit control
+ * flow.
*/
bool color_mgmt_changed : 1;
@@ -279,6 +280,15 @@ struct drm_crtc_state {
*/
struct drm_property_blob *gamma_lut;
+ /**
+ * @shaper_lut:
+ *
+ * Lookup table used to de-linearize pixel data for gamma correction.
+ * See drm_crtc_enable_color_mgmt(). The blob (if not NULL) is an array
+ * of &struct drm_color_lut.
+ */
+ struct drm_property_blob *shaper_lut;
+
/**
* @target_vblank:
*
@@ -808,6 +808,18 @@ struct drm_mode_config {
* degamma LUT.
*/
struct drm_property *ctm_property;
+
+ /**
+ * @shaper_lut_property: Optional CRTC property to set the shaper LUT used to
+ * convert colors before 3D LUT conversion.
+ */
+ struct drm_property *shaper_lut_property;
+ /**
+ * @shaper_lut_size_property: Optional CRTC property for the size of the
+ * shaper LUT as supported by the driver (read-only).
+ */
+ struct drm_property *shaper_lut_size_property;
+
/**
* @gamma_lut_property: Optional CRTC property to set the LUT used to
* convert the colors, after the CTM matrix, to the gamma space of the
@@ -60,7 +60,7 @@ struct drm_mode_object {
void (*free_cb)(struct kref *kref);
};
-#define DRM_OBJECT_MAX_PROPERTY 24
+#define DRM_OBJECT_MAX_PROPERTY 26
/**
* struct drm_object_properties - property tracking for &drm_mode_object
*/