Message ID | 20230831063635.2816-2-biju.das.jz@bp.renesas.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | Enable 4-bit tx support | expand |
Hi Biju, On Thu, Aug 31, 2023 at 8:36 AM Biju Das <biju.das.jz@bp.renesas.com> wrote: > Enable Renesas at25ql128a flash connected to QSPI0. Also disable > the node from rzfive-smarc-som as it is untested. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > --- > v1->v2: > * Enabled 4-bit tx support Thanks for the update! > --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi > +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi > @@ -179,6 +179,18 @@ eth1_pins: eth1 { > <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */ > }; > > + qspi0_pins: qspi0 { > + qspi0-data { > + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; > + power-source = <1800>; > + }; > + > + qspi0-ctrl { > + pins = "QSPI0_SPCLK", "QSPI0_SSL"; > + power-source = <1800>; > + }; > + }; From the v1 review comments: > > I guess there is no need for the subnodes, as all pins use the same power- > > source value? > > OK, will remove subnode. Oops... The rest LGTM. Gr{oetje,eeting}s, Geert
Hi Geert Uytterhoeven, Thanks for the feedback. > Subject: Re: [PATCH v2 1/3] arm64: dts: renesas: rzg2ul-smarc-som: Enable > serial NOR flash > > Hi Biju, > > On Thu, Aug 31, 2023 at 8:36 AM Biju Das <biju.das.jz@bp.renesas.com> > wrote: > > Enable Renesas at25ql128a flash connected to QSPI0. Also disable the > > node from rzfive-smarc-som as it is untested. > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > --- > > v1->v2: > > * Enabled 4-bit tx support > > Thanks for the update! > > > --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi > > +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi > > @@ -179,6 +179,18 @@ eth1_pins: eth1 { > > <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */ > > }; > > > > + qspi0_pins: qspi0 { > > + qspi0-data { > > + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", > "QSPI0_IO3"; > > + power-source = <1800>; > > + }; > > + > > + qspi0-ctrl { > > + pins = "QSPI0_SPCLK", "QSPI0_SSL"; > > + power-source = <1800>; > > + }; > > + }; > > From the v1 review comments: > > > > I guess there is no need for the subnodes, as all pins use the same > > > power- source value? > > > > OK, will remove subnode. > > Oops... OK will send V3. Cheers, Biju
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi index 97cdad2a12e2..b9e4e476ff7b 100644 --- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi @@ -179,6 +179,18 @@ eth1_pins: eth1 { <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */ }; + qspi0_pins: qspi0 { + qspi0-data { + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; + power-source = <1800>; + }; + + qspi0-ctrl { + pins = "QSPI0_SPCLK", "QSPI0_SSL"; + power-source = <1800>; + }; + }; + sdhi0_emmc_pins: sd0emmc { sd0_emmc_data { pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", @@ -230,6 +242,38 @@ sd0_mux_uhs { }; }; +&sbc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + spi-cpol; + spi-cpha; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x00000000 0x200000>; + read-only; + }; + user@200000 { + reg = <0x200000 0xE00000>; + }; + }; + }; +}; + #if (SW_SW0_DEV_SEL) &sdhi0 { pinctrl-0 = <&sdhi0_emmc_pins>; diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi index c62debc7ca7e..0c9d72c32879 100644 --- a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi @@ -42,6 +42,10 @@ phy1: ethernet-phy@7 { }; }; +&sbc { + status = "disabled"; +}; + &sdhi0 { status = "disabled"; };
Enable Renesas at25ql128a flash connected to QSPI0. Also disable the node from rzfive-smarc-som as it is untested. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Enabled 4-bit tx support --- .../boot/dts/renesas/rzg2ul-smarc-som.dtsi | 44 +++++++++++++++++++ .../boot/dts/renesas/rzfive-smarc-som.dtsi | 4 ++ 2 files changed, 48 insertions(+)