diff mbox series

[10/14] arm64: renesas: r9a08g045: Add Ethernet nodes

Message ID 20231120070024.4079344-11-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series renesas: rzg3s: Add support for Ethernet | expand

Commit Message

Claudiu Beznea Nov. 20, 2023, 7 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Add Ethernet nodes available on RZ/G3S (R9A08G045).

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)

Comments

Geert Uytterhoeven Dec. 1, 2023, 5:35 p.m. UTC | #1 
Hi Claudiu,

On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Add Ethernet nodes available on RZ/G3S (R9A08G045).
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 {
>                         status = "disabled";
>                 };
>
> +               eth0: ethernet@11c30000 {
> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
> +                       reg = <0 0x11c30000 0 0x10000>;
> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "mux", "fil", "arp_ns";
> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
> +                       clock-names = "axi", "chi", "refclk";
> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
> +                       power-domains = <&cpg>;

Perhaps add a default phy mode, like on other SoCs?

    phy-mode = "rgmii"';

Also missing:

    #address-cells = <1>;
    #size-cells = <0>;

> +                       status = "disabled";
> +               };

Same comments for eth1.

Gr{oetje,eeting}s,

                        Geert
Claudiu Beznea Dec. 4, 2023, 7:41 a.m. UTC | #2 
Hi, Geert,

On 01.12.2023 19:35, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> Add Ethernet nodes available on RZ/G3S (R9A08G045).
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Thanks for your patch!
> 
>> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>> @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 {
>>                         status = "disabled";
>>                 };
>>
>> +               eth0: ethernet@11c30000 {
>> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
>> +                       reg = <0 0x11c30000 0 0x10000>;
>> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "mux", "fil", "arp_ns";
>> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
>> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
>> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
>> +                       clock-names = "axi", "chi", "refclk";
>> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
>> +                       power-domains = <&cpg>;
> 
> Perhaps add a default phy mode, like on other SoCs?
> 
>     phy-mode = "rgmii"';

I skipped this (even it was available on the other SoCs) as I consider the
phy-mode is board specific.

> 
> Also missing:
> 
>     #address-cells = <1>;
>     #size-cells = <0>;

Same for these.

> 
>> +                       status = "disabled";
>> +               };
> 
> Same comments for eth1.
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
>
Geert Uytterhoeven Dec. 4, 2023, 8:02 a.m. UTC | #3 
Hi Claudiu,

On Mon, Dec 4, 2023 at 8:41 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote:
> On 01.12.2023 19:35, Geert Uytterhoeven wrote:
> > On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>
> >> Add Ethernet nodes available on RZ/G3S (R9A08G045).
> >>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >
> > Thanks for your patch!
> >
> >> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >> @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 {
> >>                         status = "disabled";
> >>                 };
> >>
> >> +               eth0: ethernet@11c30000 {
> >> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
> >> +                       reg = <0 0x11c30000 0 0x10000>;
> >> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> >> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> >> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> >> +                       interrupt-names = "mux", "fil", "arp_ns";
> >> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
> >> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
> >> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
> >> +                       clock-names = "axi", "chi", "refclk";
> >> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
> >> +                       power-domains = <&cpg>;
> >
> > Perhaps add a default phy mode, like on other SoCs?
> >
> >     phy-mode = "rgmii"';
>
> I skipped this (even it was available on the other SoCs) as I consider the
> phy-mode is board specific.

IC.  Still, it's good to have some consistency across boards.

> > Also missing:
> >
> >     #address-cells = <1>;
> >     #size-cells = <0>;
>
> Same for these.

These are required, and always have the same values, so it makes more
sense to have them in the SoC .dtsi file, once.

Gr{oetje,eeting}s,

                        Geert
Claudiu Beznea Dec. 4, 2023, 8:38 a.m. UTC | #4 
On 04.12.2023 10:02, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Mon, Dec 4, 2023 at 8:41 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote:
>> On 01.12.2023 19:35, Geert Uytterhoeven wrote:
>>> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
>>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>>>
>>>> Add Ethernet nodes available on RZ/G3S (R9A08G045).
>>>>
>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>>
>>> Thanks for your patch!
>>>
>>>> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>>>> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
>>>> @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 {
>>>>                         status = "disabled";
>>>>                 };
>>>>
>>>> +               eth0: ethernet@11c30000 {
>>>> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
>>>> +                       reg = <0 0x11c30000 0 0x10000>;
>>>> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
>>>> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
>>>> +                       interrupt-names = "mux", "fil", "arp_ns";
>>>> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
>>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
>>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
>>>> +                       clock-names = "axi", "chi", "refclk";
>>>> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
>>>> +                       power-domains = <&cpg>;
>>>
>>> Perhaps add a default phy mode, like on other SoCs?
>>>
>>>     phy-mode = "rgmii"';
>>
>> I skipped this (even it was available on the other SoCs) as I consider the
>> phy-mode is board specific.
> 
> IC.  Still, it's good to have some consistency across boards.
> 
>>> Also missing:
>>>
>>>     #address-cells = <1>;
>>>     #size-cells = <0>;
>>
>> Same for these.
> 
> These are required, and always have the same values, so it makes more
> sense to have them in the SoC .dtsi file, once.

I remember I had a compilation warning with an Ethernet controller
configured with fixed-link having #address-cells, #size-cells. With
fixed-link these were not needed.

Anyway... I'll keep all in dtsi if you prefer it this way.

Thank you,
Claudiu Beznea

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
>
Geert Uytterhoeven Dec. 4, 2023, 9 a.m. UTC | #5 
Hi Claudiu,

On Mon, Dec 4, 2023 at 9:38 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote:
> On 04.12.2023 10:02, Geert Uytterhoeven wrote:
> > On Mon, Dec 4, 2023 at 8:41 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote:
> >> On 01.12.2023 19:35, Geert Uytterhoeven wrote:
> >>> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> >>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>>
> >>>> Add Ethernet nodes available on RZ/G3S (R9A08G045).
> >>>>
> >>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>
> >>> Thanks for your patch!
> >>>
> >>>> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >>>> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >>>> @@ -149,6 +149,38 @@ sdhi2: mmc@11c20000 {
> >>>>                         status = "disabled";
> >>>>                 };
> >>>>
> >>>> +               eth0: ethernet@11c30000 {
> >>>> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
> >>>> +                       reg = <0 0x11c30000 0 0x10000>;
> >>>> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> >>>> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> >>>> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +                       interrupt-names = "mux", "fil", "arp_ns";
> >>>> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
> >>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
> >>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
> >>>> +                       clock-names = "axi", "chi", "refclk";
> >>>> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
> >>>> +                       power-domains = <&cpg>;
> >>>
> >>> Perhaps add a default phy mode, like on other SoCs?
> >>>
> >>>     phy-mode = "rgmii"';
> >>
> >> I skipped this (even it was available on the other SoCs) as I consider the
> >> phy-mode is board specific.
> >
> > IC.  Still, it's good to have some consistency across boards.
> >
> >>> Also missing:
> >>>
> >>>     #address-cells = <1>;
> >>>     #size-cells = <0>;
> >>
> >> Same for these.
> >
> > These are required, and always have the same values, so it makes more
> > sense to have them in the SoC .dtsi file, once.
>
> I remember I had a compilation warning with an Ethernet controller
> configured with fixed-link having #address-cells, #size-cells. With
> fixed-link these were not needed.

I think EtherAVB always use MDIO for management, so fixed-link is
not applicable.

> Anyway... I'll keep all in dtsi if you prefer it this way.

Yes please, thanks!

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index 6c7b29b69d0e..1caa0587fdd4 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -149,6 +149,38 @@  sdhi2: mmc@11c20000 {
 			status = "disabled";
 		};
 
+		eth0: ethernet@11c30000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c40000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c40000 0 0x10000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@12400000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;