diff mbox series

[v5,07/16] RISC-V: Move T-Head PMU to CPU feature alternative framework

Message ID 20231213070301.1684751-8-peterlin@andestech.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Support Andes PMU extension | expand

Commit Message

Yu-Chien Peter Lin Dec. 13, 2023, 7:02 a.m. UTC 
The custom PMU extension aims to support perf event sampling prior
to the ratification of Sscofpmf. Instead of diverting the bits and
register reserved for future standard, a set of custom registers is
added.  Hence, we may consider it as a CPU feature rather than an
erratum.

T-Head cores need to append "xtheadpmu" to the riscv,isa-extensions
for each cpu node in device tree, and enable CONFIG_THEAD_CUSTOM_PMU
for proper functioning as of this commit.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Removed m{vendor/arch/imp}id checks in pmu_sbi_setup_irqs()
Changes v3 -> v4:
  - No change
Changes v4 -> v5:
  - Include Guo's Reviewed-by
  - Let THEAD_CUSTOM_PMU depend on ARCH_THEAD
---
 arch/riscv/Kconfig.errata            | 13 -------------
 arch/riscv/errata/thead/errata.c     | 19 -------------------
 arch/riscv/include/asm/errata_list.h | 15 +--------------
 arch/riscv/include/asm/hwcap.h       |  1 +
 arch/riscv/kernel/cpufeature.c       |  1 +
 drivers/perf/Kconfig                 | 13 +++++++++++++
 drivers/perf/riscv_pmu_sbi.c         | 19 ++++++++++++++-----
 7 files changed, 30 insertions(+), 51 deletions(-)

Comments

Conor Dooley Dec. 13, 2023, 3:27 p.m. UTC | #1 
On Wed, Dec 13, 2023 at 03:02:52PM +0800, Yu Chien Peter Lin wrote:
> The custom PMU extension aims to support perf event sampling prior
> to the ratification of Sscofpmf. Instead of diverting the bits and
> register reserved for future standard, a set of custom registers is
> added.  Hence, we may consider it as a CPU feature rather than an
> erratum.
> 
> T-Head cores need to append "xtheadpmu" to the riscv,isa-extensions
> for each cpu node in device tree, and enable CONFIG_THEAD_CUSTOM_PMU
> for proper functioning as of this commit.
> 
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Guo Ren <guoren@kernel.org>

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.
Conor Dooley Dec. 13, 2023, 3:32 p.m. UTC | #2 
On Wed, Dec 13, 2023 at 03:27:25PM +0000, Conor Dooley wrote:
> On Wed, Dec 13, 2023 at 03:02:52PM +0800, Yu Chien Peter Lin wrote:
> > The custom PMU extension aims to support perf event sampling prior
> > to the ratification of Sscofpmf. Instead of diverting the bits and
> > register reserved for future standard, a set of custom registers is
> > added.  Hence, we may consider it as a CPU feature rather than an
> > erratum.
> > 
> > T-Head cores need to append "xtheadpmu" to the riscv,isa-extensions
> > for each cpu node in device tree, and enable CONFIG_THEAD_CUSTOM_PMU
> > for proper functioning as of this commit.
> > 
> > Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> > Reviewed-by: Guo Ren <guoren@kernel.org>
> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

I think it is also worth mentioning that the only SoC, to my knowledge,
that works with a mainline kernel, and supports the SBI PMU is the D1,
and only recently has the OpenSBI port for the SoC been fixed to
actually work correctly, and that has apparently not yet made it to
a release of OpenSBI, making the "damage" caused by requiring a DT
property for PMU support not all that bad since the firmware needs to be
changed anyway.

Thanks for your work on this,
Conor.
diff mbox series

Patch

diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata
index e2c731cfed8c..0d19f47d1018 100644
--- a/arch/riscv/Kconfig.errata
+++ b/arch/riscv/Kconfig.errata
@@ -86,17 +86,4 @@  config ERRATA_THEAD_CMO
 
 	  If you don't know what to do here, say "Y".
 
-config ERRATA_THEAD_PMU
-	bool "Apply T-Head PMU errata"
-	depends on ERRATA_THEAD && RISCV_PMU_SBI
-	default y
-	help
-	  The T-Head C9xx cores implement a PMU overflow extension very
-	  similar to the core SSCOFPMF extension.
-
-	  This will apply the overflow errata to handle the non-standard
-	  behaviour via the regular SBI PMU driver and interface.
-
-	  If you don't know what to do here, say "Y".
-
 endmenu # "CPU errata selection"
diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
index 0554ed4bf087..5de5f7209132 100644
--- a/arch/riscv/errata/thead/errata.c
+++ b/arch/riscv/errata/thead/errata.c
@@ -53,22 +53,6 @@  static bool errata_probe_cmo(unsigned int stage,
 	return true;
 }
 
-static bool errata_probe_pmu(unsigned int stage,
-			     unsigned long arch_id, unsigned long impid)
-{
-	if (!IS_ENABLED(CONFIG_ERRATA_THEAD_PMU))
-		return false;
-
-	/* target-c9xx cores report arch_id and impid as 0 */
-	if (arch_id != 0 || impid != 0)
-		return false;
-
-	if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
-		return false;
-
-	return true;
-}
-
 static u32 thead_errata_probe(unsigned int stage,
 			      unsigned long archid, unsigned long impid)
 {
@@ -80,9 +64,6 @@  static u32 thead_errata_probe(unsigned int stage,
 	if (errata_probe_cmo(stage, archid, impid))
 		cpu_req_errata |= BIT(ERRATA_THEAD_CMO);
 
-	if (errata_probe_pmu(stage, archid, impid))
-		cpu_req_errata |= BIT(ERRATA_THEAD_PMU);
-
 	return cpu_req_errata;
 }
 
diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index 4ed21a62158c..9bccc2ba0eb5 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -25,8 +25,7 @@ 
 #ifdef CONFIG_ERRATA_THEAD
 #define	ERRATA_THEAD_PBMT 0
 #define	ERRATA_THEAD_CMO 1
-#define	ERRATA_THEAD_PMU 2
-#define	ERRATA_THEAD_NUMBER 3
+#define	ERRATA_THEAD_NUMBER 2
 #endif
 
 #ifdef __ASSEMBLY__
@@ -147,18 +146,6 @@  asm volatile(ALTERNATIVE_2(						\
 	    "r"((unsigned long)(_start) + (_size))			\
 	: "a0")
 
-#define THEAD_C9XX_RV_IRQ_PMU			17
-#define THEAD_C9XX_CSR_SCOUNTEROF		0x5c5
-
-#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
-asm volatile(ALTERNATIVE(						\
-	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
-	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
-		THEAD_VENDOR_ID, ERRATA_THEAD_PMU,			\
-		CONFIG_ERRATA_THEAD_PMU)				\
-	: "=r" (__ovl) :						\
-	: "memory")
-
 #endif /* __ASSEMBLY__ */
 
 #endif
diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
index 06d30526ef3b..c85ee34c78d9 100644
--- a/arch/riscv/include/asm/hwcap.h
+++ b/arch/riscv/include/asm/hwcap.h
@@ -57,6 +57,7 @@ 
 #define RISCV_ISA_EXT_ZIHPM		42
 #define RISCV_ISA_EXT_SMSTATEEN		43
 #define RISCV_ISA_EXT_ZICOND		44
+#define RISCV_ISA_EXT_XTHEADPMU		45
 
 #define RISCV_ISA_EXT_MAX		64
 
diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
index b3785ffc1570..e606f588d366 100644
--- a/arch/riscv/kernel/cpufeature.c
+++ b/arch/riscv/kernel/cpufeature.c
@@ -185,6 +185,7 @@  const struct riscv_isa_ext_data riscv_isa_ext[] = {
 	__RISCV_ISA_EXT_DATA(svinval, RISCV_ISA_EXT_SVINVAL),
 	__RISCV_ISA_EXT_DATA(svnapot, RISCV_ISA_EXT_SVNAPOT),
 	__RISCV_ISA_EXT_DATA(svpbmt, RISCV_ISA_EXT_SVPBMT),
+	__RISCV_ISA_EXT_DATA(xtheadpmu, RISCV_ISA_EXT_XTHEADPMU),
 };
 
 const size_t riscv_isa_ext_count = ARRAY_SIZE(riscv_isa_ext);
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 273d67ecf6d2..6cef15ec7c25 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -86,6 +86,19 @@  config RISCV_PMU_SBI
 	  full perf feature support i.e. counter overflow, privilege mode
 	  filtering, counter configuration.
 
+config THEAD_CUSTOM_PMU
+	bool "T-Head custom PMU support"
+	depends on ARCH_THEAD && RISCV_ALTERNATIVE && RISCV_PMU_SBI
+	default y
+	help
+	  The T-Head C9xx cores implement a PMU overflow extension very
+	  similar to the core SSCOFPMF extension.
+
+	  This will patch the overflow CSR and handle the non-standard
+	  behaviour via the regular SBI PMU driver and interface.
+
+	  If you don't know what to do here, say "Y".
+
 config ARM_PMU_ACPI
 	depends on ARM_PMU && ACPI
 	def_bool y
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 2edbc37abadf..31ca79846399 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -20,10 +20,21 @@ 
 #include <linux/cpu_pm.h>
 #include <linux/sched/clock.h>
 
-#include <asm/errata_list.h>
 #include <asm/sbi.h>
 #include <asm/cpufeature.h>
 
+#define THEAD_C9XX_RV_IRQ_PMU		17
+#define THEAD_C9XX_CSR_SCOUNTEROF	0x5c5
+
+#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
+asm volatile(ALTERNATIVE(						\
+	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
+	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
+		0, RISCV_ISA_EXT_XTHEADPMU,				\
+		CONFIG_THEAD_CUSTOM_PMU)				\
+	: "=r" (__ovl) :						\
+	: "memory")
+
 #define SYSCTL_NO_USER_ACCESS	0
 #define SYSCTL_USER_ACCESS	1
 #define SYSCTL_LEGACY		2
@@ -808,10 +819,8 @@  static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 	if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
 		riscv_pmu_irq_num = RV_IRQ_PMU;
 		riscv_pmu_use_irq = true;
-	} else if (IS_ENABLED(CONFIG_ERRATA_THEAD_PMU) &&
-		   riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
-		   riscv_cached_marchid(0) == 0 &&
-		   riscv_cached_mimpid(0) == 0) {
+	} else if (riscv_isa_extension_available(NULL, XTHEADPMU) &&
+		   IS_ENABLED(CONFIG_THEAD_CUSTOM_PMU)) {
 		riscv_pmu_irq_num = THEAD_C9XX_RV_IRQ_PMU;
 		riscv_pmu_use_irq = true;
 	}