| Message ID | 20240112142621.13525-4-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Add missing port pins for RZ/Five SoC | expand |
Hi Prabhakar, > -----Original Message----- > From: Prabhakar <prabhakar.csengg@gmail.com> > Sent: Friday, January 12, 2024 2:26 PM > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing > port pins P19 to P28 > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Add the missing port pins P19 to P28 for RZ/Five SoC. These additional > pins provide expanded capabilities and are exclusive to the RZ/Five SoC. > > Couple of port pins have different configuration and are not identical for > the complete port so introduce struct rzg2l_variable_pin_cfg to handle > such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config > is then assigned in rzg2l_pinctrl_get_variable_pin_cfg(). > > Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO > pins which support interrupt facility. > > While at define RZG2L_GPIO_PORT_PACK() using > RZG2L_GPIO_PORT_SPARSE_PACK(). > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > drivers/pinctrl/renesas/pinctrl-rzg2l.c | 213 +++++++++++++++++++++++- > 1 file changed, 204 insertions(+), 9 deletions(-) > > diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c > b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > index 8b8644d2c355..04bb21d564d4 100644 > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > @@ -57,6 +57,8 @@ > #define PIN_CFG_IOLH_C BIT(13) > #define PIN_CFG_SOFT_PS BIT(14) > #define PIN_CFG_OEN BIT(15) > +#define PIN_CFG_VARIABLE BIT(16) > +#define PIN_CFG_NOGPIO_INT BIT(17) > > #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ > (PIN_CFG_IOLH_##group | \ > @@ -76,17 +78,23 @@ > PIN_CFG_FILNUM | \ > PIN_CFG_FILCLKSEL) > > -/* > - * n indicates number of pins in the port, a is the register index > - * and f is pin configuration capabilities supported. > - */ > #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) > #define PIN_CFG_PIN_REG_MASK GENMASK(27, 20) > #define PIN_CFG_MASK GENMASK(19, 0) > > -#define RZG2L_GPIO_PORT_PACK(n, a, f) ((((1ULL << (n)) - 1) << 28) | \ > - FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) > | \ > - FIELD_PREP_CONST(PIN_CFG_MASK, (f))) > +/* > + * m indicates the bitmap of supported pins, a is the register index > + * and f is pin configuration capabilities supported. > + */ > +#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) > (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ > + > FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \ > + FIELD_PREP_CONST(PIN_CFG_MASK, (f))) > + > +/* > + * n indicates number of pins in the port, a is the register index > + * and f is pin configuration capabilities supported. > + */ > +#define RZG2L_GPIO_PORT_PACK(n, a, f) > RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) > > /* > * BIT(63) indicates dedicated pin, p is the register index while @@ - > 200,6 +208,18 @@ struct rzg2l_dedicated_configs { > u64 config; > }; > > +/** > + * struct rzg2l_variable_pin_cfg - pin data cfg > + * @cfg: port pin configuration > + * @port: port number > + * @pin: port pin > + */ > +struct rzg2l_variable_pin_cfg { > + u32 cfg:20; > + u8 port:5; u32 ?? > + u8 pin:5; u32 ?? Cheers, Biju
Hi Biju, Thank you for the review. On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com> wrote: > > > Hi Prabhakar, > > > -----Original Message----- > > From: Prabhakar <prabhakar.csengg@gmail.com> > > Sent: Friday, January 12, 2024 2:26 PM > > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing > > port pins P19 to P28 > > <snip> > > > > +/** > > + * struct rzg2l_variable_pin_cfg - pin data cfg > > + * @cfg: port pin configuration > > + * @port: port number > > + * @pin: port pin > > + */ > > +struct rzg2l_variable_pin_cfg { > > + u32 cfg:20; > > + u8 port:5; > > u32 ?? This is done based on the feedback provided previously by Geert [0]. > > + u8 pin:5; > > u32 ?? > ditto. [0] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20231201131551.201503-3-prabhakar.mahadev-lad.rj@bp.renesas.com/#25625118 Cheers, Prabhakar
> -----Original Message----- > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > Sent: Friday, January 12, 2024 5:06 PM > Subject: Re: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > missing port pins P19 to P28 > > Hi Biju, > > Thank you for the review. > > On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com> > wrote: > > > > > > Hi Prabhakar, > > > > > -----Original Message----- > > > From: Prabhakar <prabhakar.csengg@gmail.com> > > > Sent: Friday, January 12, 2024 2:26 PM > > > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > > > missing port pins P19 to P28 > > > > <snip> > > > > > > +/** > > > + * struct rzg2l_variable_pin_cfg - pin data cfg > > > + * @cfg: port pin configuration > > > + * @port: port number > > > + * @pin: port pin > > > + */ > > > +struct rzg2l_variable_pin_cfg { > > > + u32 cfg:20; > > > + u8 port:5; > > > > u32 ?? > This is done based on the feedback provided previously by Geert [0]. > > > > + u8 pin:5; > > > > u32 ?? > > > ditto. > As per[0] suggestion is, As cfg only contains the lower bits (PIN_CFG_*), I think you can fit everything in a u32: u32 cfg: 20; u32 port: 5; u32 pin: 3; Cheers, Biju
On Fri, Jan 12, 2024 at 5:10 PM Biju Das <biju.das.jz@bp.renesas.com> wrote: > > > > > -----Original Message----- > > From: Lad, Prabhakar <prabhakar.csengg@gmail.com> > > Sent: Friday, January 12, 2024 5:06 PM > > Subject: Re: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > > missing port pins P19 to P28 > > > > Hi Biju, > > > > Thank you for the review. > > > > On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com> > > wrote: > > > > > > > > > Hi Prabhakar, > > > > > > > -----Original Message----- > > > > From: Prabhakar <prabhakar.csengg@gmail.com> > > > > Sent: Friday, January 12, 2024 2:26 PM > > > > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the > > > > missing port pins P19 to P28 > > > > > > <snip> > > > > > > > > +/** > > > > + * struct rzg2l_variable_pin_cfg - pin data cfg > > > > + * @cfg: port pin configuration > > > > + * @port: port number > > > > + * @pin: port pin > > > > + */ > > > > +struct rzg2l_variable_pin_cfg { > > > > + u32 cfg:20; > > > > + u8 port:5; > > > > > > u32 ?? > > This is done based on the feedback provided previously by Geert [0]. > > > > > > + u8 pin:5; > > > > > > u32 ?? > > > > > ditto. > > > > As per[0] suggestion is, > > As cfg only contains the lower bits (PIN_CFG_*), I think you can fit > everything in a u32: > > u32 cfg: 20; > u32 port: 5; > u32 pin: 3; > Ouch my bad, i'll send a v5 with this change. Cheers, Prabhakar
Hi Prabhakar,
kernel test robot noticed the following build errors:
[auto build test ERROR on geert-renesas-drivers/renesas-pinctrl]
[cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833
base: https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl
patch link: https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com
patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
config: openrisc-allyesconfig (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/config)
compiler: or1k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401132220.aTrR8ckA-lkp@intel.com/
All errors (new ones prefixed by >>):
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:730:31: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
730 | u8 pinmap = FIELD_GET(PIN_CFG_PIN_MAP_MASK, cfg);
| ^~~~~~~~~~~~~~~~~~~~
In file included from include/linux/bitfield.h:10:
drivers/pinctrl/renesas/pinctrl-rzg2l.c: At top level:
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[0]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1537 | RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[1]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1538 | RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[2]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1539 | RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[3]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1540 | RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[4]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1541 | RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[5]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1542 | RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[6]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1543 | RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[7]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1544 | RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[8]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1545 | RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[9]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1546 | RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[10]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1547 | RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[11]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1548 | RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[12]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1549 | RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[13]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1550 | RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[14]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1551 | RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[15]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1552 | RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[16]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1553 | RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[17]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1554 | RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[18]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1555 | RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[19]')
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1556 | RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
135 | BUILD_BUG_ON_ZERO((_mask) == 0) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
137 | BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
| ^~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
118 | #define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
| ^~~~~~~~~~~~~~~~~
include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
139 | __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \
| ^~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
| ^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
| ^~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
97 | #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
1557 | RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
| ^~~~~~~~~~~~~~~~~~~~
include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
35 | (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
| ^~
include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
141 | (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
| ^~~~~
include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
37 | (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
| ^~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
81 | #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
vim +89 drivers/pinctrl/renesas/pinctrl-rzg2l.c
84
85 /*
86 * m indicates the bitmap of supported pins, a is the register index
87 * and f is pin configuration capabilities supported.
88 */
> 89 #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
90 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
91 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
92
Hi Prabhakar,
kernel test robot noticed the following build errors:
[auto build test ERROR on geert-renesas-drivers/renesas-pinctrl]
[cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833
base: https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl
patch link: https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com
patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
config: powerpc-randconfig-r081-20240113 (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/config)
compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401140457.dWlCUkuN-lkp@intel.com/
All errors (new ones prefixed by >>):
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: error: anonymous bit-field has negative width (-1)
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:47: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
^
include/linux/bitfield.h:137:3: note: expanded from macro 'FIELD_PREP_CONST'
BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
^
include/linux/build_bug.h:16:53: note: expanded from macro 'BUILD_BUG_ON_ZERO'
#define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
~~~~~~~~~^~~~~~
include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
^
drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
#define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28)
^
include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
(GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
^
include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
(~UL(0) >> (BITS_PER_LONG - 1 - (h))))
^
include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \
^~~~~
vim +1579 drivers/pinctrl/renesas/pinctrl-rzg2l.c
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1535
943be6806bed3f Lad Prabhakar 2024-01-12 1536 static const u64 r9a07g044_gpio_configs[] = {
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1537 RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1538 RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1539 RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1540 RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1541 RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1542 RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1543 RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1544 RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1545 RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1546 RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1547 RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1548 RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1549 RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1550 RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1551 RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1552 RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1553 RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
fcfb63148c241a Biju Das 2021-09-22 1554 RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1555 RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1556 RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1557 RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1558 RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1559 RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1560 RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1561 RZG2L_GPIO_PORT_PACK(2, 0x28, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1562 RZG2L_GPIO_PORT_PACK(2, 0x29, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1563 RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1564 RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1565 RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1566 RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1567 RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1568 RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1569 RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1570 RZG2L_GPIO_PORT_PACK(2, 0x31, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1571 RZG2L_GPIO_PORT_PACK(2, 0x32, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1572 RZG2L_GPIO_PORT_PACK(2, 0x33, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1573 RZG2L_GPIO_PORT_PACK(2, 0x34, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10 1574 RZG2L_GPIO_PORT_PACK(3, 0x35, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1575 RZG2L_GPIO_PORT_PACK(2, 0x36, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1576 RZG2L_GPIO_PORT_PACK(3, 0x37, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1577 RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1578 RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 @1579 RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1580 RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1581 RZG2L_GPIO_PORT_PACK(4, 0x3c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1582 RZG2L_GPIO_PORT_PACK(4, 0x3d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1583 RZG2L_GPIO_PORT_PACK(4, 0x3e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1584 RZG2L_GPIO_PORT_PACK(4, 0x3f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1585 RZG2L_GPIO_PORT_PACK(5, 0x40, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1586 };
c4c4637eb57f2a Lad Prabhakar 2021-07-27 1587
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index 8b8644d2c355..04bb21d564d4 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -57,6 +57,8 @@ #define PIN_CFG_IOLH_C BIT(13) #define PIN_CFG_SOFT_PS BIT(14) #define PIN_CFG_OEN BIT(15) +#define PIN_CFG_VARIABLE BIT(16) +#define PIN_CFG_NOGPIO_INT BIT(17) #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ (PIN_CFG_IOLH_##group | \ @@ -76,17 +78,23 @@ PIN_CFG_FILNUM | \ PIN_CFG_FILCLKSEL) -/* - * n indicates number of pins in the port, a is the register index - * and f is pin configuration capabilities supported. - */ #define PIN_CFG_PIN_MAP_MASK GENMASK(35, 28) #define PIN_CFG_PIN_REG_MASK GENMASK(27, 20) #define PIN_CFG_MASK GENMASK(19, 0) -#define RZG2L_GPIO_PORT_PACK(n, a, f) ((((1ULL << (n)) - 1) << 28) | \ - FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \ - FIELD_PREP_CONST(PIN_CFG_MASK, (f))) +/* + * m indicates the bitmap of supported pins, a is the register index + * and f is pin configuration capabilities supported. + */ +#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \ + FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \ + FIELD_PREP_CONST(PIN_CFG_MASK, (f))) + +/* + * n indicates number of pins in the port, a is the register index + * and f is pin configuration capabilities supported. + */ +#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) /* * BIT(63) indicates dedicated pin, p is the register index while @@ -200,6 +208,18 @@ struct rzg2l_dedicated_configs { u64 config; }; +/** + * struct rzg2l_variable_pin_cfg - pin data cfg + * @cfg: port pin configuration + * @port: port number + * @pin: port pin + */ +struct rzg2l_variable_pin_cfg { + u32 cfg:20; + u8 port:5; + u8 pin:5; +}; + struct rzg2l_pinctrl_data { const char * const *port_pins; const u64 *port_pin_configs; @@ -208,6 +228,8 @@ struct rzg2l_pinctrl_data { unsigned int n_port_pins; unsigned int n_dedicated_pins; const struct rzg2l_hwcfg *hwcfg; + const struct rzg2l_variable_pin_cfg *variable_pin_cfg; + unsigned int n_variable_pin_cfg; }; /** @@ -243,6 +265,143 @@ struct rzg2l_pinctrl { static const u16 available_ps[] = { 1800, 2500, 3300 }; +#ifdef CONFIG_RISCV +static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl, + u64 pincfg, + unsigned int port, + u8 pin) +{ + unsigned int i; + + for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) { + if (pctrl->data->variable_pin_cfg[i].port == port && + pctrl->data->variable_pin_cfg[i].pin == pin) + return (pincfg & ~PIN_CFG_VARIABLE) | pctrl->data->variable_pin_cfg[i].cfg; + } + + return 0; +} + +static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = { + { + .port = 20, + .pin = 0, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 6, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 7, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT + }, + { + .port = 23, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 0, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_NOGPIO_INT, + }, +}; +#endif + static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl, u8 pin, u8 off, u8 func) { @@ -1446,6 +1605,25 @@ static const u64 r9a07g043_gpio_configs[] = { RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS), +#ifdef CONFIG_RISCV + /* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P19 */ + RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE), /* P20 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P21 */ + RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P22 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE), /* P23 */ + RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE), /* P24 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF | + PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_NOGPIO_INT), /* P25 */ + 0x0, /* P26 */ + 0x0, /* P27 */ + RZG2L_GPIO_PORT_PACK(6, 0x0f, RZG2L_MPXED_PIN_FUNCS | PIN_CFG_NOGPIO_INT), /* P28 */ +#endif }; static const u64 r9a08g045_gpio_configs[] = { @@ -1606,12 +1784,18 @@ static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = { PIN_CFG_IO_VMC_SD1)) }, }; -static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data) +static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl) { + const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq]; + const struct rzg2l_pinctrl_data *data = pctrl->data; + u64 *pin_data = pin_desc->drv_data; unsigned int gpioint; unsigned int i; u32 port, bit; + if (*pin_data & PIN_CFG_NOGPIO_INT) + return -EINVAL; + port = virq / 8; bit = virq % 8; @@ -1721,7 +1905,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc, unsigned long flags; int gpioint, irq; - gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data); + gpioint = rzg2l_gpio_get_gpioint(child, pctrl); if (gpioint < 0) return gpioint; @@ -1907,6 +2091,13 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl) if (i && !(i % RZG2L_PINS_PER_PORT)) j++; pin_data[i] = pctrl->data->port_pin_configs[j]; +#ifdef CONFIG_RISCV + if (pin_data[i] & PIN_CFG_VARIABLE) + pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl, + pin_data[i], + j, + i % RZG2L_PINS_PER_PORT); +#endif pins[i].drv_data = &pin_data[i]; } @@ -2058,6 +2249,10 @@ static struct rzg2l_pinctrl_data r9a07g043_data = { .n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT, .n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common), .hwcfg = &rzg2l_hwcfg, +#ifdef CONFIG_RISCV + .variable_pin_cfg = r9a07g043f_variable_pin_cfg, + .n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg), +#endif }; static struct rzg2l_pinctrl_data r9a07g044_data = {