| Message ID | 20240309155334.1310262-2-niklas.soderlund+renesas@ragnatech.se (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | ravb: Support describing the MDIO bus | expand |
On 3/9/24 6:53 PM, Niklas Söderlund wrote: > The Renesas Ethernet AVB bindings do not allow the MDIO bus to be > described. This has not been needed as only a single PHY is > supported and no MDIO bus properties have been needed. > > Add an optional mdio node to the binding which allows the MDIO bus to be > described and allow bus properties to be set. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> [...] MBR, Sergey
On 09/03/2024 16:53, Niklas Söderlund wrote: > The Renesas Ethernet AVB bindings do not allow the MDIO bus to be > described. This has not been needed as only a single PHY is > supported and no MDIO bus properties have been needed. > > Add an optional mdio node to the binding which allows the MDIO bus to be > described and allow bus properties to be set. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- I believe this is v2. Mark your patchsets clearly (git format-patch -v2 or use b4) and provide changelog under --- or in the cover letter. > Documentation/devicetree/bindings/net/renesas,etheravb.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml > index de7ba7f345a9..5345ad8e1be4 100644 > --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml > +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml > @@ -93,6 +93,10 @@ properties: > description: Number of size cells on the MDIO bus. > const: 0 > > + mdio: > + $ref: /schemas/net/mdio.yaml# > + unevaluatedProperties: false > + Please fixup the phy pattern, so it will be obvious it is for ethernet-phy and probably deprecate it. The phy goes to mdio bus, right? Best regards, Krzysztof
Hi Krzysztof, Thanks for your comments. On 2024-03-10 09:44:45 +0100, Krzysztof Kozlowski wrote: > On 09/03/2024 16:53, Niklas Söderlund wrote: > > The Renesas Ethernet AVB bindings do not allow the MDIO bus to be > > described. This has not been needed as only a single PHY is > > supported and no MDIO bus properties have been needed. > > > > Add an optional mdio node to the binding which allows the MDIO bus to be > > described and allow bus properties to be set. > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > --- > > I believe this is v2. Mark your patchsets clearly (git format-patch -v2 > or use b4) and provide changelog under --- or in the cover letter. > > > > Documentation/devicetree/bindings/net/renesas,etheravb.yaml | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml > > index de7ba7f345a9..5345ad8e1be4 100644 > > --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml > > +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml > > @@ -93,6 +93,10 @@ properties: > > description: Number of size cells on the MDIO bus. > > const: 0 > > > > + mdio: > > + $ref: /schemas/net/mdio.yaml# > > + unevaluatedProperties: false > > + > > Please fixup the phy pattern, so it will be obvious it is for > ethernet-phy and probably deprecate it. The phy goes to mdio bus, right? Yes the PHY goes on the MDIO bus and the pattern is only needed for backward compatibility. The pattern was specific to ethernet-phy in the past, but Rob removed it in commit ac8fe40c3628 ("dt-bindings: net: renesas: Drop ethernet-phy node schema"). Have something changed and I should revert that as part of this patch? I agree it should be listed as deprecated, would this diff work for you? +# In older bindings there where no mdio child-node to describe the MDIO bus +# and the PHY. To not fail older bindings accept any node with an address. New +# users should describe the PHY inside the mdio child-node. patternProperties: "@[0-9a-f]$": type: object + deprecated: true Depending on if Rob's patch should be reverted in whole or in part I could also try to revert the pattern to "^ethernet-phy@[0-9a-f]$" if you wish. Please let me know what looks best to you. > > > Best regards, > Krzysztof >
On 10/03/2024 14:46, Niklas Söderlund wrote: > Hi Krzysztof, > > Thanks for your comments. > > On 2024-03-10 09:44:45 +0100, Krzysztof Kozlowski wrote: >> On 09/03/2024 16:53, Niklas Söderlund wrote: >>> The Renesas Ethernet AVB bindings do not allow the MDIO bus to be >>> described. This has not been needed as only a single PHY is >>> supported and no MDIO bus properties have been needed. >>> >>> Add an optional mdio node to the binding which allows the MDIO bus to be >>> described and allow bus properties to be set. >>> >>> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> >>> --- >> >> I believe this is v2. Mark your patchsets clearly (git format-patch -v2 >> or use b4) and provide changelog under --- or in the cover letter. >> >> >>> Documentation/devicetree/bindings/net/renesas,etheravb.yaml | 4 ++++ >>> 1 file changed, 4 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml >>> index de7ba7f345a9..5345ad8e1be4 100644 >>> --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml >>> +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml >>> @@ -93,6 +93,10 @@ properties: >>> description: Number of size cells on the MDIO bus. >>> const: 0 >>> >>> + mdio: >>> + $ref: /schemas/net/mdio.yaml# >>> + unevaluatedProperties: false >>> + >> >> Please fixup the phy pattern, so it will be obvious it is for >> ethernet-phy and probably deprecate it. The phy goes to mdio bus, right? > > Yes the PHY goes on the MDIO bus and the pattern is only needed for > backward compatibility. > > The pattern was specific to ethernet-phy in the past, but Rob removed it > in commit ac8fe40c3628 ("dt-bindings: net: renesas: Drop ethernet-phy > node schema"). Have something changed and I should revert that as part > of this patch? Ah, indeed. Let it stay as is. I thought there would be conflict with mdio, but pattern still looks for unit address, so it's fine to have both: existing @[0-9a-f] and mdio. > > I agree it should be listed as deprecated, would this diff work for you? > > +# In older bindings there where no mdio child-node to describe the MDIO bus > +# and the PHY. To not fail older bindings accept any node with an address. New > +# users should describe the PHY inside the mdio child-node. > patternProperties: > "@[0-9a-f]$": > type: object > + deprecated: true Looks fine. > > Depending on if Rob's patch should be reverted in whole or in part I > could also try to revert the pattern to "^ethernet-phy@[0-9a-f]$" if you > wish. Please let me know what looks best to you. > Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index de7ba7f345a9..5345ad8e1be4 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -93,6 +93,10 @@ properties: description: Number of size cells on the MDIO bus. const: 0 + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + renesas,no-ether-link: type: boolean description:
The Renesas Ethernet AVB bindings do not allow the MDIO bus to be described. This has not been needed as only a single PHY is supported and no MDIO bus properties have been needed. Add an optional mdio node to the binding which allows the MDIO bus to be described and allow bus properties to be set. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- Documentation/devicetree/bindings/net/renesas,etheravb.yaml | 4 ++++ 1 file changed, 4 insertions(+)