diff mbox series

[46/64] i2c: riic: reword according to newest specification

Message ID 20240322132619.6389-47-wsa+renesas@sang-engineering.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series i2c: reword i2c_algorithm according to newest specification | expand

Commit Message

Wolfram Sang March 22, 2024, 1:25 p.m. UTC 
Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-riic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index e43ff483c56e..685a65153fa8 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -12,9 +12,9 @@ 
  *
  * 1) The main xfer routine kicks off a transmission by putting the start bit
  * (or repeated start) on the bus and enabling the transmit interrupt (TIE)
- * since we need to send the slave address + RW bit in every case.
+ * since we need to send the client address + RW bit in every case.
  *
- * 2) TIE sends slave address + RW bit and selects how to continue.
+ * 2) TIE sends client address + RW bit and selects how to continue.
  *
  * 3a) Write case: We keep utilizing TIE as long as we have data to send. If we
  * are done, we switch over to the transmission done interrupt (TEIE) and mark
@@ -276,7 +276,7 @@  static u32 riic_func(struct i2c_adapter *adap)
 }
 
 static const struct i2c_algorithm riic_algo = {
-	.master_xfer	= riic_xfer,
+	.xfer	= riic_xfer,
 	.functionality	= riic_func,
 };