diff mbox series

[49/64] i2c: sh_mobile: reword according to newest specification

Message ID 20240322132619.6389-50-wsa+renesas@sang-engineering.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series i2c: reword i2c_algorithm according to newest specification | expand

Commit Message

Wolfram Sang March 22, 2024, 1:25 p.m. UTC
Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-sh_mobile.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index c65ac3d7eadc..276a036d8ef0 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -53,7 +53,7 @@ 
 /*                                                                          */
 /* Receive operation:                                                       */
 /*                                                                          */
-/* 0 byte receive - not supported since slave may hold SDA low              */
+/* 0 byte receive - not supported since client may hold SDA low             */
 /*                                                                          */
 /* 1 byte receive       [TX] | [RX]                                         */
 /* BUS:     S     A8     ACK | D8(1)   ACK   P(*)                           */
@@ -93,7 +93,7 @@ 
 /*         _______________________________________________                  */
 /* BUSY __/                                               \_                */
 /*                                                                          */
-/* (*) The STOP condition is only sent by the master at the end of the last */
+/* (*) The STOP condition is only sent by the host at the end of the last   */
 /* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */
 /* only cleared after the STOP condition, so, between messages we have to   */
 /* poll for the DTE bit.                                                    */
@@ -495,7 +495,7 @@  static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
 
 	ret = dmaengine_slave_config(chan, &cfg);
 	if (ret) {
-		dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
+		dev_dbg(dev, "DMA config failed for %s (%d)\n", chan_name, ret);
 		dma_release_channel(chan);
 		return ERR_PTR(ret);
 	}
@@ -540,7 +540,7 @@  static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
 					 read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
 					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!txdesc) {
-		dev_dbg(pd->dev, "dma prep slave sg failed, using PIO\n");
+		dev_dbg(pd->dev, "dma prep sg failed, using PIO\n");
 		sh_mobile_i2c_cleanup_dma(pd, false);
 		return;
 	}
@@ -740,8 +740,8 @@  static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
 
 static const struct i2c_algorithm sh_mobile_i2c_algorithm = {
 	.functionality = sh_mobile_i2c_func,
-	.master_xfer = sh_mobile_i2c_xfer,
-	.master_xfer_atomic = sh_mobile_i2c_xfer_atomic,
+	.xfer = sh_mobile_i2c_xfer,
+	.xfer_atomic = sh_mobile_i2c_xfer_atomic,
 };
 
 static const struct i2c_adapter_quirks sh_mobile_i2c_quirks = {