diff mbox series

[v2,1/2] thermal: rcar_gen3: Move Tj_T storage to shared private data

Message ID 20240327133013.3982199-2-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series thermal: rcar_gen3: Use temperature approximation from datasheet | expand

Commit Message

Niklas Söderlund March 27, 2024, 1:30 p.m. UTC
The calculated Tj_T constant is calculated from the PTAT data either
read from the first TSC zone on the device if calibration data is fused,
or from fallback values in the driver itself. The value calculated is
shared among all TSC zones.

Move the Tj_T constant to the shared private data structure instead of
duplicating it in each TSC private data. This requires adding a pointer
to the shared data to the TSC private data structure. This back pointer
make it easier to further rework the temperature conversion logic.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
* Changes since v1
- Insert tj_t member in struct rcar_gen3_thermal_priv in reverse
  Christmas-tree ordering.
- Only calculate Tj_T once, instead of once for each TSC zone.
- Fix misspelling in commit message.
---
 drivers/thermal/rcar_gen3_thermal.c | 35 +++++++++++++++++++----------
 1 file changed, 23 insertions(+), 12 deletions(-)

Comments

Geert Uytterhoeven April 18, 2024, 9:27 a.m. UTC | #1
On Wed, Mar 27, 2024 at 2:30 PM Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> The calculated Tj_T constant is calculated from the PTAT data either
> read from the first TSC zone on the device if calibration data is fused,
> or from fallback values in the driver itself. The value calculated is
> shared among all TSC zones.
>
> Move the Tj_T constant to the shared private data structure instead of
> duplicating it in each TSC private data. This requires adding a pointer
> to the shared data to the TSC private data structure. This back pointer
> make it easier to further rework the temperature conversion logic.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> * Changes since v1
> - Insert tj_t member in struct rcar_gen3_thermal_priv in reverse
>   Christmas-tree ordering.
> - Only calculate Tj_T once, instead of once for each TSC zone.
> - Fix misspelling in commit message.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index a764cb1115a5..7c1ca912b9b1 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -81,10 +81,10 @@  struct rcar_thermal_info {
 };
 
 struct rcar_gen3_thermal_tsc {
+	struct rcar_gen3_thermal_priv *priv;
 	void __iomem *base;
 	struct thermal_zone_device *zone;
 	struct equation_coefs coef;
-	int tj_t;
 	int thcode[3];
 };
 
@@ -93,6 +93,7 @@  struct rcar_gen3_thermal_priv {
 	struct thermal_zone_device_ops ops;
 	unsigned int num_tscs;
 	int ptat[3];
+	int tj_t;
 	const struct rcar_thermal_info *info;
 };
 
@@ -136,26 +137,32 @@  static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
 /* no idea where these constants come from */
 #define TJ_3 -41
 
-static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_priv *priv,
-					 struct rcar_gen3_thermal_tsc *tsc,
-					 int ths_tj_1)
+static void rcar_gen3_thermal_shared_coefs(struct rcar_gen3_thermal_priv *priv)
 {
+	int tj1 = priv->info->ths_tj_1;
+
+	priv->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (tj1 - TJ_3))
+		      / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3);
+}
+
+static void rcar_gen3_thermal_tsc_coefs(struct rcar_gen3_thermal_priv *priv,
+					struct rcar_gen3_thermal_tsc *tsc)
+{
+	int tj1 = priv->info->ths_tj_1;
+
 	/* TODO: Find documentation and document constant calculation formula */
 
 	/*
 	 * Division is not scaled in BSP and if scaled it might overflow
 	 * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
 	 */
-	tsc->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3))
-		     / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3);
-
 	tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[2]),
-				 tsc->tj_t - FIXPT_INT(TJ_3));
+				 priv->tj_t - FIXPT_INT(TJ_3));
 	tsc->coef.b1 = FIXPT_INT(tsc->thcode[2]) - tsc->coef.a1 * TJ_3;
 
 	tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[0]),
-				 tsc->tj_t - FIXPT_INT(ths_tj_1));
-	tsc->coef.b2 = FIXPT_INT(tsc->thcode[0]) - tsc->coef.a2 * ths_tj_1;
+				 priv->tj_t - FIXPT_INT(tj1));
+	tsc->coef.b2 = FIXPT_INT(tsc->thcode[0]) - tsc->coef.a2 * tj1;
 }
 
 static int rcar_gen3_thermal_round(int temp)
@@ -196,10 +203,11 @@  static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc,
 					      int mcelsius)
 {
+	struct rcar_gen3_thermal_priv *priv = tsc->priv;
 	int celsius, val;
 
 	celsius = DIV_ROUND_CLOSEST(mcelsius, 1000);
-	if (celsius <= INT_FIXPT(tsc->tj_t))
+	if (celsius <= INT_FIXPT(priv->tj_t))
 		val = celsius * tsc->coef.a1 + tsc->coef.b1;
 	else
 		val = celsius * tsc->coef.a2 + tsc->coef.b2;
@@ -516,6 +524,7 @@  static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 		}
 
+		tsc->priv = priv;
 		tsc->base = devm_ioremap_resource(dev, res);
 		if (IS_ERR(tsc->base)) {
 			ret = PTR_ERR(tsc->base);
@@ -530,11 +539,13 @@  static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 	if (!rcar_gen3_thermal_read_fuses(priv))
 		dev_info(dev, "No calibration values fused, fallback to driver values\n");
 
+	rcar_gen3_thermal_shared_coefs(priv);
+
 	for (i = 0; i < priv->num_tscs; i++) {
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
 		rcar_gen3_thermal_init(priv, tsc);
-		rcar_gen3_thermal_calc_coefs(priv, tsc, priv->info->ths_tj_1);
+		rcar_gen3_thermal_tsc_coefs(priv, tsc);
 
 		zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops);
 		if (IS_ERR(zone)) {