diff mbox series

[v4] pinctrl: renesas: rzg2l: Configure the interrupt type on resume

Message ID 20240419063822.3467424-1-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series [v4] pinctrl: renesas: rzg2l: Configure the interrupt type on resume | expand

Commit Message

Claudiu Beznea April 19, 2024, 6:38 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup
of TINT has been moved in rzg2l_tint_set_edge() though
rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle. To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.

Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v4:
- moved dev_crit() out of critical section

Changes in v3:
- none; this patch was part of series at [1] and added in v3 of that
  series

Changes in v2:
- none

[1] https://lore.kernel.org/all/20240320104230.446400-1-claudiu.beznea.uj@bp.renesas.com/

 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

Comments

Geert Uytterhoeven April 19, 2024, 7:52 a.m. UTC | #1 
On Fri, Apr 19, 2024 at 8:38 AM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
> source at the same time") removed the setup of TINT from
> rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup
> of TINT has been moved in rzg2l_tint_set_edge() though
> rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
> not properly re-configured after a suspend-to-RAM cycle. To address
> this issue and avoid spurious interrupts while resumming set the
> interrupt type before enabling it.
>
> Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
>
> Changes in v4:
> - moved dev_crit() out of critical section

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-pinctrl-fixes for v6.9.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 93916553bcc7..20425afc6b33 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -2045,7 +2045,9 @@  static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
 
 	for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
 		struct irq_data *data;
+		unsigned long flags;
 		unsigned int virq;
+		int ret;
 
 		if (!pctrl->hwirq[i])
 			continue;
@@ -2063,17 +2065,18 @@  static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
 			continue;
 		}
 
-		if (!irqd_irq_disabled(data)) {
-			unsigned long flags;
-
-			/*
-			 * This has to be atomically executed to protect against a concurrent
-			 * interrupt.
-			 */
-			raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+		/*
+		 * This has to be atomically executed to protect against a concurrent
+		 * interrupt.
+		 */
+		raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+		ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
+		if (!ret && !irqd_irq_disabled(data))
 			rzg2l_gpio_irq_enable(data);
-			raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
-		}
+		raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
+
+		if (ret)
+			dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);
 	}
 }