@@ -742,12 +742,22 @@ static int rvin_setup(struct rvin_dev *vin)
*/
switch (vin->mbus_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
- /* BT.601/BT.1358 16bit YCbCr422 */
- vnmc |= VNMC_INF_YUV16;
+ if (vin->is_csi)
+ /* YCbCr422 8-bit */
+ vnmc |= VNMC_INF_YUV8_BT601;
+ else
+ /* BT.601/BT.1358 16bit YCbCr422 */
+ vnmc |= VNMC_INF_YUV16;
input_is_yuv = true;
break;
case MEDIA_BUS_FMT_UYVY8_1X16:
- vnmc |= VNMC_INF_YUV16 | VNMC_YCAL;
+ if (vin->is_csi)
+ /* YCbCr422 8-bit */
+ vnmc |= VNMC_INF_YUV8_BT601;
+ else
+ /* BT.601/BT.1358 16bit YCbCr422 */
+ vnmc |= VNMC_INF_YUV16;
+ vnmc |= VNMC_YCAL;
input_is_yuv = true;
break;
case MEDIA_BUS_FMT_UYVY8_2X8:
The YUYV8_1X16 and UYVY8_1X16 formats are treated as 'ITU-R BT.601/BT.1358 16-bit YCbCr-422 input' (YUV16 - 0x5) in the R-Car VIN driver and are thus disallowed when capturing frames from the R-Car CSI-2 interface according to the hardware manual. As the 1X16 format variants are meant to be used with serial busses they have to be treated as 'YCbCr-422 8-bit data input' (0x1) when capturing from CSI-2, which is a valid setting for CSI-2. Commit 78b3f9d75a62 ("media: rcar-vin: Add check that input interface and format are valid") disallowed capturing YUV16 when using the CSI-2 interface. Fix this by using YUV8_BT601 for YCbCr422 when CSI-2 is in use. Fixes: 78b3f9d75a62 ("media: rcar-vin: Add check that input interface and format are valid") Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- .../media/platform/renesas/rcar-vin/rcar-dma.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)