@@ -10,10 +10,12 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/reset-controller.h>
#define RESET 0x000
+#define VBENCTL 0x03c
#define RESET_SEL_PLLRESET BIT(12)
#define RESET_PLLRESET BIT(8)
@@ -32,6 +34,7 @@ struct rzg2l_usbphy_ctrl_priv {
struct reset_controller_dev rcdev;
struct reset_control *rstc;
void __iomem *base;
+ struct platform_device *vdev;
spinlock_t lock;
};
@@ -100,10 +103,19 @@ static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = {
.status = rzg2l_usbphy_ctrl_status,
};
+static const struct regmap_config rzg2l_usb_regconf = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 1,
+};
+
static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rzg2l_usbphy_ctrl_priv *priv;
+ struct platform_device *vdev;
+ struct regmap *regmap;
unsigned long flags;
int error;
u32 val;
@@ -116,6 +128,22 @@ static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
+ regmap = devm_regmap_init_mmio(dev, priv->base + VBENCTL, &rzg2l_usb_regconf);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ vdev = platform_device_alloc("rzg2l-usb-vbus-regulator", pdev->id);
+ if (!vdev)
+ return -ENOMEM;
+ vdev->dev.parent = dev;
+ priv->vdev = vdev;
+
+ error = platform_device_add(vdev);
+ if (error) {
+ platform_device_put(vdev);
+ return error;
+ }
+
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(priv->rstc))
return dev_err_probe(dev, PTR_ERR(priv->rstc),
@@ -160,6 +188,7 @@ static void rzg2l_usbphy_ctrl_remove(struct platform_device *pdev)
{
struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev);
+ platform_device_unregister(priv->vdev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
reset_control_assert(priv->rstc);
As per RZ/G2L HW manual, VBUSEN can be controlled by the VBOUT bit of the VBUS Control Register(VBENCTL) register in the USBPHY Control. Expose this register as regmap and instantiate the USB VBUS regulator device, so that consumer can control the vbus using regulator API's. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Instatiated regulator driver --- drivers/reset/reset-rzg2l-usbphy-ctrl.c | 29 +++++++++++++++++++++++++ 1 file changed, 29 insertions(+)