| Message ID | 20240610113124.2396688-2-niklas.soderlund+renesas@ragnatech.se (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | rcar-vin: Add support for R-Car V4M | expand |
On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > index 5539d0f8e74d..168cb02f8abe 100644 > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > @@ -54,6 +54,7 @@ properties: > - renesas,vin-r8a77995 # R-Car D3 > - renesas,vin-r8a779a0 # R-Car V3U > - renesas,vin-r8a779g0 # R-Car V4H > + - renesas,vin-r8a779h0 # R-Car V4M Your driver patch suggests that this is compatible with the g variant.
Hi Conor, Thanks for your feedback. On 2024-06-10 17:03:49 +0100, Conor Dooley wrote: > On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- > > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > index 5539d0f8e74d..168cb02f8abe 100644 > > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > @@ -54,6 +54,7 @@ properties: > > - renesas,vin-r8a77995 # R-Car D3 > > - renesas,vin-r8a779a0 # R-Car V3U > > - renesas,vin-r8a779g0 # R-Car V4H > > + - renesas,vin-r8a779h0 # R-Car V4M > > Your driver patch suggests that this is compatible with the g variant. Currently it is. But that not always be true, I tried to outline this in to cover letter. The V4M capture pipeline is similar to the other Gen4 SoC supported upstream already V4H. Currently all futures supported for VIN on V4M are also supported by V4H and the driver code can be shared. But as done for other R-Car IP bindings a new dedicated binding for V4M is created. This have proved prudent in the past where quirks are found even within the same generation as more advance use-cases are enabled.
On Mon, Jun 10, 2024 at 06:59:35PM +0200, Niklas Söderlund wrote: > Hi Conor, > > Thanks for your feedback. > > On 2024-06-10 17:03:49 +0100, Conor Dooley wrote: > > On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > > > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > --- > > > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > index 5539d0f8e74d..168cb02f8abe 100644 > > > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > @@ -54,6 +54,7 @@ properties: > > > - renesas,vin-r8a77995 # R-Car D3 > > > - renesas,vin-r8a779a0 # R-Car V3U > > > - renesas,vin-r8a779g0 # R-Car V4H > > > + - renesas,vin-r8a779h0 # R-Car V4M > > > > Your driver patch suggests that this is compatible with the g variant. > > Currently it is. But that not always be true, I tried to outline this in > to cover letter. To be honest, I don't usually read cover letters when reviewing bindings. Information about why things are/are not compatible should be in a commit itself. > The V4M capture pipeline is similar to the other Gen4 SoC supported > upstream already V4H. Currently all futures supported for VIN on V4M are > also supported by V4H and the driver code can be shared. But as done for > other R-Car IP bindings a new dedicated binding for V4M is created. > This have proved prudent in the past where quirks are found even within > the same generation as more advance use-cases are enabled. I don't understand how this precludes using the g variant as a fallback compatible. I'm not suggesting that you don't add a specific one for the h variant. Thanks, Conor.
On 2024-06-10 22:32:29 +0100, Conor Dooley wrote: > On Mon, Jun 10, 2024 at 06:59:35PM +0200, Niklas Söderlund wrote: > > Hi Conor, > > > > Thanks for your feedback. > > > > On 2024-06-10 17:03:49 +0100, Conor Dooley wrote: > > > On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > > > > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > > > > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > --- > > > > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > > > > 1 file changed, 1 insertion(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > index 5539d0f8e74d..168cb02f8abe 100644 > > > > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > @@ -54,6 +54,7 @@ properties: > > > > - renesas,vin-r8a77995 # R-Car D3 > > > > - renesas,vin-r8a779a0 # R-Car V3U > > > > - renesas,vin-r8a779g0 # R-Car V4H > > > > + - renesas,vin-r8a779h0 # R-Car V4M > > > > > > Your driver patch suggests that this is compatible with the g variant. > > > > Currently it is. But that not always be true, I tried to outline this in > > to cover letter. > > To be honest, I don't usually read cover letters when reviewing bindings. > Information about why things are/are not compatible should be in a > commit itself. > > > The V4M capture pipeline is similar to the other Gen4 SoC supported > > upstream already V4H. Currently all futures supported for VIN on V4M are > > also supported by V4H and the driver code can be shared. But as done for > > other R-Car IP bindings a new dedicated binding for V4M is created. > > This have proved prudent in the past where quirks are found even within > > the same generation as more advance use-cases are enabled. > > I don't understand how this precludes using the g variant as a fallback > compatible. I'm not suggesting that you don't add a specific one for the > h variant. The bindings have been around for a while and currently there are 25 SoC specific compatibles, one for each SoC supported. Each compatible consist of the SoC model number, not the VIN IP model/version number as no such versioning schema exist. The datasheets are specific for each SoC and there are differences between almost every SoC. There are of course lots of similarities between the SoCs and the similarities are cluster around the 3 generations (Gen{2,3,4}) supported. Using the g variant as fallback in DTS for h variant even if we also add a specific one for h is confusing. As g and h are two different SoC. The g variant is r8a779g0 which is the SoC name/number for V4H. The h variant is r8a779h0 which is the SoC name/number for V4M. I think the core of the problem is that there are no versioning schema for the individual IP blocks used on each SoC. For better or worse the bindings for lots of Renesas IPs are centred around SoC name/number and not the individual IP implementations.
On Tue, Jun 11, 2024 at 01:06:17PM +0200, Niklas Söderlund wrote: > On 2024-06-10 22:32:29 +0100, Conor Dooley wrote: > > On Mon, Jun 10, 2024 at 06:59:35PM +0200, Niklas Söderlund wrote: > > > Hi Conor, > > > > > > Thanks for your feedback. > > > > > > On 2024-06-10 17:03:49 +0100, Conor Dooley wrote: > > > > On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > > > > > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > > > > > > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > > > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > > --- > > > > > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > index 5539d0f8e74d..168cb02f8abe 100644 > > > > > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > @@ -54,6 +54,7 @@ properties: > > > > > - renesas,vin-r8a77995 # R-Car D3 > > > > > - renesas,vin-r8a779a0 # R-Car V3U > > > > > - renesas,vin-r8a779g0 # R-Car V4H > > > > > + - renesas,vin-r8a779h0 # R-Car V4M > > > > > > > > Your driver patch suggests that this is compatible with the g variant. > > > > > > Currently it is. But that not always be true, I tried to outline this in > > > to cover letter. > > > > To be honest, I don't usually read cover letters when reviewing bindings. > > Information about why things are/are not compatible should be in a > > commit itself. > > > > > The V4M capture pipeline is similar to the other Gen4 SoC supported > > > upstream already V4H. Currently all futures supported for VIN on V4M are > > > also supported by V4H and the driver code can be shared. But as done for > > > other R-Car IP bindings a new dedicated binding for V4M is created. > > > This have proved prudent in the past where quirks are found even within > > > the same generation as more advance use-cases are enabled. > > > > I don't understand how this precludes using the g variant as a fallback > > compatible. I'm not suggesting that you don't add a specific one for the > > h variant. > > The bindings have been around for a while and currently there are 25 SoC > specific compatibles, one for each SoC supported. Each compatible > consist of the SoC model number, not the VIN IP model/version number as > no such versioning schema exist. > > The datasheets are specific for each SoC and there are differences > between almost every SoC. There are of course lots of similarities > between the SoCs and the similarities are cluster around the 3 > generations (Gen{2,3,4}) supported. > > Using the g variant as fallback in DTS for h variant even if we also add > a specific one for h is confusing. As g and h are two different SoC. Why? That is the very definition of how "compatible" is supposed to work. > The g variant is r8a779g0 which is the SoC name/number for V4H. > The h variant is r8a779h0 which is the SoC name/number for V4M. > > I think the core of the problem is that there are no versioning schema > for the individual IP blocks used on each SoC. For better or worse the > bindings for lots of Renesas IPs are centred around SoC name/number and > not the individual IP implementations. We've tried IP version based compatibles before. It doesn't work. Guess what, the IP version changes with nearly every SoC. Chip designers have no discipline. Rob
Hi Rob, Conor, On Thu, Jun 13, 2024 at 6:51 PM Rob Herring <robh@kernel.org> wrote: > On Tue, Jun 11, 2024 at 01:06:17PM +0200, Niklas Söderlund wrote: > > On 2024-06-10 22:32:29 +0100, Conor Dooley wrote: > > > On Mon, Jun 10, 2024 at 06:59:35PM +0200, Niklas Söderlund wrote: > > > > On 2024-06-10 17:03:49 +0100, Conor Dooley wrote: > > > > > On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > > > > > > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > > > > > > > > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > > > > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > > > --- > > > > > > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > index 5539d0f8e74d..168cb02f8abe 100644 > > > > > > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > @@ -54,6 +54,7 @@ properties: > > > > > > - renesas,vin-r8a77995 # R-Car D3 > > > > > > - renesas,vin-r8a779a0 # R-Car V3U > > > > > > - renesas,vin-r8a779g0 # R-Car V4H > > > > > > + - renesas,vin-r8a779h0 # R-Car V4M > > > > > > > > > > Your driver patch suggests that this is compatible with the g variant. > > > > > > > > Currently it is. But that not always be true, I tried to outline this in > > > > to cover letter. > > > > > > To be honest, I don't usually read cover letters when reviewing bindings. > > > Information about why things are/are not compatible should be in a > > > commit itself. > > > > > > > The V4M capture pipeline is similar to the other Gen4 SoC supported > > > > upstream already V4H. Currently all futures supported for VIN on V4M are > > > > also supported by V4H and the driver code can be shared. But as done for > > > > other R-Car IP bindings a new dedicated binding for V4M is created. > > > > This have proved prudent in the past where quirks are found even within > > > > the same generation as more advance use-cases are enabled. > > > > > > I don't understand how this precludes using the g variant as a fallback > > > compatible. I'm not suggesting that you don't add a specific one for the > > > h variant. > > > > The bindings have been around for a while and currently there are 25 SoC > > specific compatibles, one for each SoC supported. Each compatible > > consist of the SoC model number, not the VIN IP model/version number as > > no such versioning schema exist. > > > > The datasheets are specific for each SoC and there are differences > > between almost every SoC. There are of course lots of similarities > > between the SoCs and the similarities are cluster around the 3 > > generations (Gen{2,3,4}) supported. > > > > Using the g variant as fallback in DTS for h variant even if we also add > > a specific one for h is confusing. As g and h are two different SoC. > > Why? That is the very definition of how "compatible" is supposed to > work. > > > The g variant is r8a779g0 which is the SoC name/number for V4H. > > The h variant is r8a779h0 which is the SoC name/number for V4M. > > > > I think the core of the problem is that there are no versioning schema > > for the individual IP blocks used on each SoC. For better or worse the > > bindings for lots of Renesas IPs are centred around SoC name/number and > > not the individual IP implementations. > > We've tried IP version based compatibles before. It doesn't work. Guess > what, the IP version changes with nearly every SoC. Chip designers have > no discipline. The R-Car V4M capture pipeline is similar to e.g. the R-Car V4H capture pipeline. But it is not identical, hence the different compatible values. AFAIU, for the current feature-set, the driver does not need to handle the differences. But that may change later... Gr{oetje,eeting}s, Geert
Hi All, On 2024-06-13 21:35:13 +0200, Geert Uytterhoeven wrote: > Hi Rob, Conor, > > On Thu, Jun 13, 2024 at 6:51 PM Rob Herring <robh@kernel.org> wrote: > > On Tue, Jun 11, 2024 at 01:06:17PM +0200, Niklas Söderlund wrote: > > > On 2024-06-10 22:32:29 +0100, Conor Dooley wrote: > > > > On Mon, Jun 10, 2024 at 06:59:35PM +0200, Niklas Söderlund wrote: > > > > > On 2024-06-10 17:03:49 +0100, Conor Dooley wrote: > > > > > > On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > > > > > > > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > > > > > > > > > > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > > > > > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > > > > --- > > > > > > > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > > > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > > index 5539d0f8e74d..168cb02f8abe 100644 > > > > > > > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > > @@ -54,6 +54,7 @@ properties: > > > > > > > - renesas,vin-r8a77995 # R-Car D3 > > > > > > > - renesas,vin-r8a779a0 # R-Car V3U > > > > > > > - renesas,vin-r8a779g0 # R-Car V4H > > > > > > > + - renesas,vin-r8a779h0 # R-Car V4M > > > > > > > > > > > > Your driver patch suggests that this is compatible with the g variant. > > > > > > > > > > Currently it is. But that not always be true, I tried to outline this in > > > > > to cover letter. > > > > > > > > To be honest, I don't usually read cover letters when reviewing bindings. > > > > Information about why things are/are not compatible should be in a > > > > commit itself. > > > > > > > > > The V4M capture pipeline is similar to the other Gen4 SoC supported > > > > > upstream already V4H. Currently all futures supported for VIN on V4M are > > > > > also supported by V4H and the driver code can be shared. But as done for > > > > > other R-Car IP bindings a new dedicated binding for V4M is created. > > > > > This have proved prudent in the past where quirks are found even within > > > > > the same generation as more advance use-cases are enabled. > > > > > > > > I don't understand how this precludes using the g variant as a fallback > > > > compatible. I'm not suggesting that you don't add a specific one for the > > > > h variant. > > > > > > The bindings have been around for a while and currently there are 25 SoC > > > specific compatibles, one for each SoC supported. Each compatible > > > consist of the SoC model number, not the VIN IP model/version number as > > > no such versioning schema exist. > > > > > > The datasheets are specific for each SoC and there are differences > > > between almost every SoC. There are of course lots of similarities > > > between the SoCs and the similarities are cluster around the 3 > > > generations (Gen{2,3,4}) supported. > > > > > > Using the g variant as fallback in DTS for h variant even if we also add > > > a specific one for h is confusing. As g and h are two different SoC. > > > > Why? That is the very definition of how "compatible" is supposed to > > work. > > > > > The g variant is r8a779g0 which is the SoC name/number for V4H. > > > The h variant is r8a779h0 which is the SoC name/number for V4M. > > > > > > I think the core of the problem is that there are no versioning schema > > > for the individual IP blocks used on each SoC. For better or worse the > > > bindings for lots of Renesas IPs are centred around SoC name/number and > > > not the individual IP implementations. > > > > We've tried IP version based compatibles before. It doesn't work. Guess > > what, the IP version changes with nearly every SoC. Chip designers have > > no discipline. > > The R-Car V4M capture pipeline is similar to e.g. the R-Car V4H capture > pipeline. But it is not identical, hence the different compatible values. > AFAIU, for the current feature-set, the driver does not need to handle > the differences. But that may change later... How can I best move forward here? The proposed compatible is not a IP block specific one, but a SoC specific one. This is the design used for the R-Car video capture pipeline and we already use 25 of them to support different SoCs in the R-Car Gen1, Gen2, Gen3 and Gen4 families using the schema proposed in this patch. If I understand the feedback correctly there is not so much an issue with adding this new compatible. Rather that the driver do not use a fallback compatible as currently the compatible added by this patch, as the driver currently treats it the same as another SoC in the R-Car Gen4 family. Have I understand the issue correctly? If so, then yes the driver currently treats it the same as another Gen4 SoC. But we already know there are differences between the video capture pipeline in these SoCs, however the driver do not yet cover these parts. So going the fallback compatible route now could create comp ability issues down the road. Is it not better to do the specific thing now and avoid that issue all together?
On Tue, Jun 18, 2024 at 03:57:53PM +0200, Niklas Söderlund wrote: > Hi All, > > On 2024-06-13 21:35:13 +0200, Geert Uytterhoeven wrote: > > Hi Rob, Conor, > > > > On Thu, Jun 13, 2024 at 6:51 PM Rob Herring <robh@kernel.org> wrote: > > > On Tue, Jun 11, 2024 at 01:06:17PM +0200, Niklas Söderlund wrote: > > > > On 2024-06-10 22:32:29 +0100, Conor Dooley wrote: > > > > > On Mon, Jun 10, 2024 at 06:59:35PM +0200, Niklas Söderlund wrote: > > > > > > On 2024-06-10 17:03:49 +0100, Conor Dooley wrote: > > > > > > > On Mon, Jun 10, 2024 at 01:31:23PM +0200, Niklas Söderlund wrote: > > > > > > > > Document support for the VIN module in the Renesas V4M (r8a779h0) SoC. > > > > > > > > > > > > > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > > > > > > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > > > > > --- > > > > > > > > Documentation/devicetree/bindings/media/renesas,vin.yaml | 1 + > > > > > > > > 1 file changed, 1 insertion(+) > > > > > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > > > index 5539d0f8e74d..168cb02f8abe 100644 > > > > > > > > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > > > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > > > > > > > > @@ -54,6 +54,7 @@ properties: > > > > > > > > - renesas,vin-r8a77995 # R-Car D3 > > > > > > > > - renesas,vin-r8a779a0 # R-Car V3U > > > > > > > > - renesas,vin-r8a779g0 # R-Car V4H > > > > > > > > + - renesas,vin-r8a779h0 # R-Car V4M > > > > > > > > > > > > > > Your driver patch suggests that this is compatible with the g variant. > > > > > > > > > > > > Currently it is. But that not always be true, I tried to outline this in > > > > > > to cover letter. > > > > > > > > > > To be honest, I don't usually read cover letters when reviewing bindings. > > > > > Information about why things are/are not compatible should be in a > > > > > commit itself. > > > > > > > > > > > The V4M capture pipeline is similar to the other Gen4 SoC supported > > > > > > upstream already V4H. Currently all futures supported for VIN on V4M are > > > > > > also supported by V4H and the driver code can be shared. But as done for > > > > > > other R-Car IP bindings a new dedicated binding for V4M is created. > > > > > > This have proved prudent in the past where quirks are found even within > > > > > > the same generation as more advance use-cases are enabled. > > > > > > > > > > I don't understand how this precludes using the g variant as a fallback > > > > > compatible. I'm not suggesting that you don't add a specific one for the > > > > > h variant. > > > > > > > > The bindings have been around for a while and currently there are 25 SoC > > > > specific compatibles, one for each SoC supported. Each compatible > > > > consist of the SoC model number, not the VIN IP model/version number as > > > > no such versioning schema exist. > > > > > > > > The datasheets are specific for each SoC and there are differences > > > > between almost every SoC. There are of course lots of similarities > > > > between the SoCs and the similarities are cluster around the 3 > > > > generations (Gen{2,3,4}) supported. > > > > > > > > Using the g variant as fallback in DTS for h variant even if we also add > > > > a specific one for h is confusing. As g and h are two different SoC. > > > > > > Why? That is the very definition of how "compatible" is supposed to > > > work. > > > > > > > The g variant is r8a779g0 which is the SoC name/number for V4H. > > > > The h variant is r8a779h0 which is the SoC name/number for V4M. > > > > > > > > I think the core of the problem is that there are no versioning schema > > > > for the individual IP blocks used on each SoC. For better or worse the > > > > bindings for lots of Renesas IPs are centred around SoC name/number and > > > > not the individual IP implementations. > > > > > > We've tried IP version based compatibles before. It doesn't work. Guess > > > what, the IP version changes with nearly every SoC. Chip designers have > > > no discipline. > > > > The R-Car V4M capture pipeline is similar to e.g. the R-Car V4H capture > > pipeline. But it is not identical, hence the different compatible values. > > AFAIU, for the current feature-set, the driver does not need to handle > > the differences. But that may change later... > > How can I best move forward here? The proposed compatible is not a IP > block specific one, but a SoC specific one. This is the design used for > the R-Car video capture pipeline and we already use 25 of them to > support different SoCs in the R-Car Gen1, Gen2, Gen3 and Gen4 families > using the schema proposed in this patch. > > If I understand the feedback correctly there is not so much an issue > with adding this new compatible. Rather that the driver do not use a > fallback compatible as currently the compatible added by this patch, as > the driver currently treats it the same as another SoC in the R-Car Gen4 > family. Have I understand the issue correctly? Yes, there's __nothing__ wrong with a specific compatible (in fact they are encouraged), it's the adding of a specific compatible without a fallback when the driver change indicates that a fallback is suitable. > If so, then yes the driver currently treats it the same as another Gen4 > SoC. But we already know there are differences between the video capture > pipeline in these SoCs, however the driver do not yet cover these parts. > So going the fallback compatible route now could create comp ability > issues down the road. Is it not better to do the specific thing now and > avoid that issue all together? It entirely depends on what the variances are. If the H variant adds some new features that the G one does not have, then there's not gonna be a compatibility issue down the road. If it is the other way around, or both variants have unique elements, then the fallback wouldn't be suitable. The onus would be is on you to explain why in your commit message for the binding if it one of the latter two cases.
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 5539d0f8e74d..168cb02f8abe 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -54,6 +54,7 @@ properties: - renesas,vin-r8a77995 # R-Car D3 - renesas,vin-r8a779a0 # R-Car V3U - renesas,vin-r8a779g0 # R-Car V4H + - renesas,vin-r8a779h0 # R-Car V4M reg: maxItems: 1