diff mbox series

[v4,07/11] media: adv748x-csi2: Validate the image format

Message ID 20240617161135.130719-8-jacopo.mondi@ideasonboard.com (mailing list archive)
State Mainlined
Commit 61893eccf6f2f097ed66e162253a5038fd42e43f
Delegated to: Kieran Bingham
Headers show
Series media: renesas: rcar-csi2: Use the subdev active state | expand

Commit Message

Jacopo Mondi June 17, 2024, 4:11 p.m. UTC
The adv748x-csi2 driver configures the CSI-2 transmitter to
automatically infer the image stream format from the connected
frontend (HDMI or AFE).

Setting a new format on the subdevice hence does not actually control
the CSI-2 output format, but it's only there for the purpose of
pipeline validation.

However, there is currently no validation that the supplied media bus
code is valid and supported by the device.

With the introduction of enum_mbus_codes a list of supported format is
now available, use it to validate that the supplied format is correct
and use the default UYVY8 one if that's not the case.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/i2c/adv748x/adv748x-csi2.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Laurent Pinchart June 18, 2024, 3:06 p.m. UTC | #1
Hi Jacopo,

Thank you for the patch.

On Mon, Jun 17, 2024 at 06:11:30PM +0200, Jacopo Mondi wrote:
> The adv748x-csi2 driver configures the CSI-2 transmitter to
> automatically infer the image stream format from the connected
> frontend (HDMI or AFE).
> 
> Setting a new format on the subdevice hence does not actually control
> the CSI-2 output format, but it's only there for the purpose of
> pipeline validation.
> 
> However, there is currently no validation that the supplied media bus
> code is valid and supported by the device.
> 
> With the introduction of enum_mbus_codes a list of supported format is
> now available, use it to validate that the supplied format is correct
> and use the default UYVY8 one if that's not the case.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 29b18b6c8b0e..0cdb397d9e0a 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -218,6 +218,22 @@ static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> +static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, u32 code)
> +{
> +	const unsigned int *codes = is_txa(tx) ?
> +				    adv748x_csi2_txa_fmts :
> +				    adv748x_csi2_txb_fmts;
> +	size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts)
> +				     : ARRAY_SIZE(adv748x_csi2_txb_fmts);
> +
> +	for (unsigned int i = 0; i < num_fmts; i++) {
> +		if (codes[i] == code)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
>  static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  				   struct v4l2_subdev_state *sd_state,
>  				   struct v4l2_subdev_format *sdformat)
> @@ -227,6 +243,13 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  	struct v4l2_mbus_framefmt *mbusformat;
>  	int ret = 0;
>  
> +	/*
> +	 * Make sure the format is supported, if not default it to
> +	 * UYVY8 as it's supported by both TXes.
> +	 */
> +	if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code))
> +		sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
> +
>  	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
>  						 sdformat->which);
>  	if (!mbusformat)
diff mbox series

Patch

diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 29b18b6c8b0e..0cdb397d9e0a 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -218,6 +218,22 @@  static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx, u32 code)
+{
+	const unsigned int *codes = is_txa(tx) ?
+				    adv748x_csi2_txa_fmts :
+				    adv748x_csi2_txb_fmts;
+	size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts)
+				     : ARRAY_SIZE(adv748x_csi2_txb_fmts);
+
+	for (unsigned int i = 0; i < num_fmts; i++) {
+		if (codes[i] == code)
+			return true;
+	}
+
+	return false;
+}
+
 static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
 				   struct v4l2_subdev_state *sd_state,
 				   struct v4l2_subdev_format *sdformat)
@@ -227,6 +243,13 @@  static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
 	struct v4l2_mbus_framefmt *mbusformat;
 	int ret = 0;
 
+	/*
+	 * Make sure the format is supported, if not default it to
+	 * UYVY8 as it's supported by both TXes.
+	 */
+	if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code))
+		sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
+
 	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
 						 sdformat->which);
 	if (!mbusformat)