@@ -179,6 +179,18 @@ eth1_pins: eth1 {
<RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
};
+ qspi0_pins: qspi0 {
+ qspi0-data {
+ pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+ power-source = <1800>;
+ };
+
+ qspi0-ctrl {
+ pins = "QSPI0_SPCLK", "QSPI0_SSL";
+ power-source = <1800>;
+ };
+ };
+
sdhi0_emmc_pins: sd0emmc {
sd0_emmc_data {
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
@@ -230,6 +242,42 @@ sd0_mux_uhs {
};
};
+&sbc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0x00000000 0x0001c000>;
+ };
+
+ partition@1d000 { /* fip is at offset 0x200 */
+ label = "fip";
+ reg = <0x0001d000 0x7e3000>;
+ };
+
+ partition@800000 {
+ label = "user";
+ reg = <0x800000 0x800000>;
+ };
+ };
+ };
+};
+
#if (SW_SW0_DEV_SEL)
&sdhi0 {
pinctrl-0 = <&sdhi0_emmc_pins>;
Enable Renesas at25ql128a flash connected to QSPI0. Tested the flash by flashing bootloaders: flash_erase /dev/mtd0 0 0 flash_erase /dev/mtd1 0 0 mtd_debug write /dev/mtd0 0 ${BL2_FILE_SIZE} ${BL2_IMAGE} mtd_debug write /dev/mtd1 512 ${FIP_FILE_SIZE} ${FIP_IMAGE} Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v2: * New patch. --- .../boot/dts/renesas/rzg2ul-smarc-som.dtsi | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+)