| Message ID | 20240828102226.223-3-paul.barker.ct@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Fix maximum TX/RX frame sizes in ravb driver | expand |
Hi Paul, Thanks for your work. On 2024-08-28 11:22:26 +0100, Paul Barker wrote: > The RX frame size limit should not be based on the current MTU setting. > Instead it should be based on the hardware capabilities. > > Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") > Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> > Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > drivers/net/ethernet/renesas/ravb_main.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c > index 471a68b0146e..b103632de4d4 100644 > --- a/drivers/net/ethernet/renesas/ravb_main.c > +++ b/drivers/net/ethernet/renesas/ravb_main.c > @@ -555,8 +555,10 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) > > static void ravb_emac_init_rcar(struct net_device *ndev) > { > + struct ravb_private *priv = netdev_priv(ndev); > + > /* Receive frame limit set register */ I wonder if we also should expand this comment to explain the addition of ETH_FCS_LEN, I have to look this up every time :-) How would you feel about adding something like? /* Set receive frame length * * The length set here described the frame from the destination * address up to and including the CRC data. However only the frame * data, exuding the CRC, are transferred to memory. To allow for * the largest frames add the CRC length to the maximum Rx * descriptor size. */ > - ravb_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, RFLR); > + ravb_write(ndev, priv->info->rx_max_frame_size + ETH_FCS_LEN, RFLR); > > /* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */ > ravb_write(ndev, ECMR_ZPF | ECMR_DM | > -- > 2.43.0 >
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 471a68b0146e..b103632de4d4 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -555,8 +555,10 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) static void ravb_emac_init_rcar(struct net_device *ndev) { + struct ravb_private *priv = netdev_priv(ndev); + /* Receive frame limit set register */ - ravb_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN, RFLR); + ravb_write(ndev, priv->info->rx_max_frame_size + ETH_FCS_LEN, RFLR); /* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */ ravb_write(ndev, ECMR_ZPF | ECMR_DM |
The RX frame size limit should not be based on the current MTU setting. Instead it should be based on the hardware capabilities. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> --- drivers/net/ethernet/renesas/ravb_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)