diff mbox series

[v2,3/8] media: rcar-csi2: Allow writing any code and data value to PHTW

Message ID 20240830203104.3479124-4-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State New
Delegated to: Kieran Bingham
Headers show
Series media: rcar-csi2: Add support for V4M | expand

Commit Message

Niklas Söderlund Aug. 30, 2024, 8:30 p.m. UTC 
The helper to write an array of code and data values to the PHY Test
Interface Write Register (PHTW) register uses the case where both code
and data are zero as an exit condition. This prevents writing data = 0
and code = 0 to the register.

Up until now this has been OK as no such combination where needed, and
it was a convenient exit condition. In future writing data = 0 and code
= 0 to the PHTW register will be needed.

Avoid using an exit condition when writing an array of PHTW values and
instead pass the length of the array to the helper. This allows any
combination of code and data to be written.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/platform/renesas/rcar-csi2.c | 29 ++++++++--------------
 1 file changed, 11 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 932826ee0961..5ab19f94fcde 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -1473,13 +1473,13 @@  static int rcsi2_phtw_write(struct rcar_csi2 *priv, u8 data, u8 code)
 }
 
 static int rcsi2_phtw_write_array(struct rcar_csi2 *priv,
-				  const struct phtw_value *values)
+				  const struct phtw_value *values,
+				  unsigned int size)
 {
-	const struct phtw_value *value;
 	int ret;
 
-	for (value = values; value->data || value->code; value++) {
-		ret = rcsi2_phtw_write(priv, value->data, value->code);
+	for (unsigned int i = 0; i < size; i++) {
+		ret = rcsi2_phtw_write(priv, values[i].data, values[i].code);
 		if (ret)
 			return ret;
 	}
@@ -1520,7 +1520,6 @@  static int __rcsi2_init_phtw_h3_v3h_m3n(struct rcar_csi2 *priv,
 		{ .data = 0x11, .code = 0xe4 },
 		{ .data = 0x01, .code = 0xe5 },
 		{ .data = 0x10, .code = 0x04 },
-		{ /* sentinel */ },
 	};
 
 	static const struct phtw_value step2[] = {
@@ -1529,12 +1528,11 @@  static int __rcsi2_init_phtw_h3_v3h_m3n(struct rcar_csi2 *priv,
 		{ .data = 0x4b, .code = 0xac },
 		{ .data = 0x03, .code = 0x00 },
 		{ .data = 0x80, .code = 0x07 },
-		{ /* sentinel */ },
 	};
 
 	int ret;
 
-	ret = rcsi2_phtw_write_array(priv, step1);
+	ret = rcsi2_phtw_write_array(priv, step1, ARRAY_SIZE(step1));
 	if (ret)
 		return ret;
 
@@ -1549,7 +1547,7 @@  static int __rcsi2_init_phtw_h3_v3h_m3n(struct rcar_csi2 *priv,
 			return ret;
 	}
 
-	return rcsi2_phtw_write_array(priv, step2);
+	return rcsi2_phtw_write_array(priv, step2, ARRAY_SIZE(step2));
 }
 
 static int rcsi2_init_phtw_h3_v3h_m3n(struct rcar_csi2 *priv, unsigned int mbps)
@@ -1575,10 +1573,9 @@  static int rcsi2_phy_post_init_v3m_e3(struct rcar_csi2 *priv)
 		{ .data = 0xee, .code = 0x54 },
 		{ .data = 0xee, .code = 0x84 },
 		{ .data = 0xee, .code = 0x94 },
-		{ /* sentinel */ },
 	};
 
-	return rcsi2_phtw_write_array(priv, step1);
+	return rcsi2_phtw_write_array(priv, step1, ARRAY_SIZE(step1));
 }
 
 static int rcsi2_init_phtw_v3u(struct rcar_csi2 *priv,
@@ -1587,20 +1584,17 @@  static int rcsi2_init_phtw_v3u(struct rcar_csi2 *priv,
 	/* In case of 1500Mbps or less */
 	static const struct phtw_value step1[] = {
 		{ .data = 0xcc, .code = 0xe2 },
-		{ /* sentinel */ },
 	};
 
 	static const struct phtw_value step2[] = {
 		{ .data = 0x01, .code = 0xe3 },
 		{ .data = 0x11, .code = 0xe4 },
 		{ .data = 0x01, .code = 0xe5 },
-		{ /* sentinel */ },
 	};
 
 	/* In case of 1500Mbps or less */
 	static const struct phtw_value step3[] = {
 		{ .data = 0x38, .code = 0x08 },
-		{ /* sentinel */ },
 	};
 
 	static const struct phtw_value step4[] = {
@@ -1608,29 +1602,28 @@  static int rcsi2_init_phtw_v3u(struct rcar_csi2 *priv,
 		{ .data = 0x4b, .code = 0xac },
 		{ .data = 0x03, .code = 0x00 },
 		{ .data = 0x80, .code = 0x07 },
-		{ /* sentinel */ },
 	};
 
 	int ret;
 
 	if (mbps != 0 && mbps <= 1500)
-		ret = rcsi2_phtw_write_array(priv, step1);
+		ret = rcsi2_phtw_write_array(priv, step1, ARRAY_SIZE(step1));
 	else
 		ret = rcsi2_phtw_write_mbps(priv, mbps, phtw_mbps_v3u, 0xe2);
 	if (ret)
 		return ret;
 
-	ret = rcsi2_phtw_write_array(priv, step2);
+	ret = rcsi2_phtw_write_array(priv, step2, ARRAY_SIZE(step2));
 	if (ret)
 		return ret;
 
 	if (mbps != 0 && mbps <= 1500) {
-		ret = rcsi2_phtw_write_array(priv, step3);
+		ret = rcsi2_phtw_write_array(priv, step3, ARRAY_SIZE(step3));
 		if (ret)
 			return ret;
 	}
 
-	ret = rcsi2_phtw_write_array(priv, step4);
+	ret = rcsi2_phtw_write_array(priv, step4, ARRAY_SIZE(step4));
 	if (ret)
 		return ret;