Message ID | 20240926180903.479895-3-sean.anderson@linux.dev (mailing list archive) |
---|---|
State | Mainlined |
Commit | 908a4a3ca34c0fc82022b7254e7eb8d3e0a59f81 |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | arm64: dts: renesas: Add SD/OE pin properties | expand |
Hi Sean, On Thu, Sep 26, 2024 at 8:09 PM Sean Anderson <sean.anderson@linux.dev> wrote: > Add SD/OE pin properties to the devicetree so that Linux can configure > the pin without relying on the OTP. This configuration is based on > inspection of the schematic (which shows the SD/OE pin permanently tied > high). > > Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> There is no change in the output of grep 10: /sys/kernel/debug/regmap/*-006a/registers before/after this patch, so Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
On Fri, Sep 27, 2024 at 12:34 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > On Thu, Sep 26, 2024 at 8:09 PM Sean Anderson <sean.anderson@linux.dev> wrote: > > Add SD/OE pin properties to the devicetree so that Linux can configure > > the pin without relying on the OTP. This configuration is based on > > inspection of the schematic (which shows the SD/OE pin permanently tied > > high). > > > > Signed-off-by: Sean Anderson <sean.anderson@linux.dev> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > There is no change in the output of > > grep 10: /sys/kernel/debug/regmap/*-006a/registers > > before/after this patch, so > Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Thanks, will queue in renesas-devel for v6.13. Gr{oetje,eeting}s, Geert
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index a2f66f916048..2a2cd788ffec 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -234,6 +234,8 @@ versaclock5: clock-generator@6a { #clock-cells = <1>; clocks = <&x23_clk>; clock-names = "xin"; + idt,shutdown = <0>; + idt,output-enable-active = <1>; }; };
Add SD/OE pin properties to the devicetree so that Linux can configure the pin without relying on the OTP. This configuration is based on inspection of the schematic (which shows the SD/OE pin permanently tied high). Signed-off-by: Sean Anderson <sean.anderson@linux.dev> --- arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 ++ 1 file changed, 2 insertions(+)