Message ID | 20240930160845.8520-7-paul@pbarker.dev (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | Extend GbEth checksum offload support to VLAN/IPv6 packets | expand |
On 9/30/24 19:08, Paul Barker wrote: > From: Paul Barker <paul.barker.ct@bp.renesas.com> > > For IPv4 packets, the header checksum will always be calculated in software > in the TX path (Documentation/networking/checksum-offloads.rst says "No > offloading of the IP header checksum is performed; it is always done in > software.") so there is no advantage in asking the hardware to also > calculate this checksum. > > Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> [...] MBR, Sergey
diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h index 98496aa39f3d..a5b4f4fe77b1 100644 --- a/drivers/net/ethernet/renesas/ravb.h +++ b/drivers/net/ethernet/renesas/ravb.h @@ -998,7 +998,7 @@ enum CSR1_BIT { CSR1_TDHD = 0x08000000, }; -#define CSR1_CSUM_ENABLE (CSR1_TIP4 | CSR1_TTCP4 | CSR1_TUDP4) +#define CSR1_CSUM_ENABLE (CSR1_TTCP4 | CSR1_TUDP4) enum CSR2_BIT { CSR2_RIP4 = 0x00000001,