Message ID | 20241210170953.2936724-22-claudiu.beznea.uj@bp.renesas.com (mailing list archive) |
---|---|
State | New |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | Add audio support for the Renesas RZ/G3S SoC | expand |
On Tue, Dec 10, 2024 at 6:10 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Add versa3 clock generator node. It provides the clocks for the Ethernet > PHY, PCIe, audio devices. > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Thanks, will queue in renesas-devel for v6.14. Gr{oetje,eeting}s, Geert
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index 2ed01d391554..6e58d47d85b0 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -92,6 +92,12 @@ vcc_sdhi2: regulator2 { gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; #if SW_CONFIG3 == SW_ON @@ -152,6 +158,30 @@ &extal_clk { &i2c1 { status = "okay"; + + versa3: clock-generator@68 { + compatible = "renesas,5l35023"; + reg = <0x68>; + clocks = <&x3_clk>; + #clock-cells = <1>; + assigned-clocks = <&versa3 0>, + <&versa3 1>, + <&versa3 2>, + <&versa3 3>, + <&versa3 4>, + <&versa3 5>; + assigned-clock-rates = <24000000>, + <12288000>, + <11289600>, + <25000000>, + <100000000>, + <100000000>; + renesas,settings = [ + 80 00 11 19 4c 42 dc 2f 06 7d 20 1a 5f 1e f2 27 + 00 40 00 00 00 00 00 00 06 0c 19 02 3f f0 90 86 + a0 80 30 30 9c + ]; + }; }; #if SW_CONFIG2 == SW_ON