===================================================================
@@ -32,6 +32,11 @@ compatible: "renesas,pcie-r8a7743" for t
and PCIe bus clocks.
- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+Optional properties:
+- phys: from common PHY binding: PHY phandle and specifier (only make sense
+ for R-Car gen3 SoCs where the PCIe PHYs have their own register blocks).
+- phy-names: from common PHY binding: should be "pcie".
+
Example:
SoC-specific DT Entry:
===================================================================
@@ -24,6 +24,7 @@
#include <linux/of_pci.h>
#include <linux/of_platform.h>
#include <linux/pci.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
@@ -140,6 +141,7 @@ static inline struct rcar_msi *to_rcar_m
/* Structure representing the PCIe interface */
struct rcar_pcie {
struct device *dev;
+ struct phy *phy;
void __iomem *base;
struct list_head resources;
int root_bus_nr;
@@ -667,6 +669,21 @@ static int rcar_pcie_hw_init_gen2(struct
return rcar_pcie_hw_init(pcie);
}
+static int rcar_pcie_hw_init_gen3(struct rcar_pcie *pcie)
+{
+ int err;
+
+ err = phy_init(pcie->phy);
+ if (err)
+ return err;
+
+ err = phy_power_on(pcie->phy);
+ if (err)
+ return err;
+
+ return rcar_pcie_hw_init(pcie);
+}
+
static int rcar_msi_alloc(struct rcar_msi *chip)
{
int msi;
@@ -916,6 +933,10 @@ static int rcar_pcie_get_resources(struc
struct resource res;
int err, i;
+ pcie->phy = devm_phy_optional_get(dev, "pcie");
+ if (IS_ERR(pcie->phy))
+ return PTR_ERR(pcie->phy);
+
err = of_address_to_resource(dev->of_node, 0, &res);
if (err)
return err;
@@ -1068,8 +1089,10 @@ static const struct of_device_id rcar_pc
.data = rcar_pcie_hw_init_gen2 },
{ .compatible = "renesas,pcie-rcar-gen2",
.data = rcar_pcie_hw_init_gen2 },
- { .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },
- { .compatible = "renesas,pcie-rcar-gen3", .data = rcar_pcie_hw_init },
+ { .compatible = "renesas,pcie-r8a7795",
+ .data = rcar_pcie_hw_init_gen3 },
+ { .compatible = "renesas,pcie-rcar-gen3",
+ .data = rcar_pcie_hw_init_gen3 },
{},
};
On R-Car gen3 SoCs the PCIe PHY has its own register region -- and I have written a generic PHY driver for it, thus we need to add the corresponding code in rcar_pcie_hw_init_gen3() and call devm_phy_optional_get() at the driver's probing time, so that the existing R-Car gen3 device trees (not having a PHY node) would still work (we only need to power up the PHY on R-Car V3H). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes in version 2: - updated the bindings. Documentation/devicetree/bindings/pci/rcar-pci.txt | 5 +++ drivers/pci/host/pcie-rcar.c | 27 +++++++++++++++++++-- 2 files changed, 30 insertions(+), 2 deletions(-)