[RFC] drm: rcar-du: make all sub-symbols depend on DRM_RCAR_DU

Commit Message

Randy Dunlap March 6, 2020, 3:17 a.m. UTC

From: Randy Dunlap <[e-mail]>

DRM_RCAR_CMM depends on DRM_RCAR_DU. Since the following Kconfig
symbols do not depend on DRM_RCAR_DU, the menu presentation is
broken for these and following non-R-Car Kconfig symbols.

Is it safe/appropriate to make all of these symbols depend on
DRM_RCAR_DU?  It make the kconfig menu presentation much cleaner.

Signed-off-by: Randy Dunlap <[e-mail]>
Cc: Laurent Pinchart <[e-mail]>
Cc: Kieran Bingham <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Cc: Koji Matsuoka <[e-mail]>
Cc: Dave Airlie <[e-mail]>
---
 drivers/gpu/drm/rcar-du/Kconfig |    3 +++
 1 file changed, 3 insertions(+)

Comments

Geert Uytterhoeven March 6, 2020, 8 a.m. UTC | #1

Hi Randy,

Thanks for your patch!

On Fri, Mar 6, 2020 at 4:18 AM Randy Dunlap <[e-mail]> wrote:
> From: Randy Dunlap <[e-mail]>
>
> DRM_RCAR_CMM depends on DRM_RCAR_DU. Since the following Kconfig
> symbols do not depend on DRM_RCAR_DU, the menu presentation is
> broken for these and following non-R-Car Kconfig symbols.
>
> Is it safe/appropriate to make all of these symbols depend on
> DRM_RCAR_DU?  It make the kconfig menu presentation much cleaner.

I think it is.
But I'd use a big "#if DRM_RCAR_DU" block instead of individual dependencies.

> Signed-off-by: Randy Dunlap <[e-mail]>

> --- linux-next-20200305.orig/drivers/gpu/drm/rcar-du/Kconfig
> +++ linux-next-20200305/drivers/gpu/drm/rcar-du/Kconfig
> @@ -24,6 +24,7 @@ config DRM_RCAR_CMM
>  config DRM_RCAR_DW_HDMI
>         tristate "R-Car DU Gen3 HDMI Encoder Support"
>         depends on DRM && OF
> +       depends on DRM_RCAR_DU
>         select DRM_DW_HDMI
>         help
>           Enable support for R-Car Gen3 internal HDMI encoder.
> @@ -31,6 +32,7 @@ config DRM_RCAR_DW_HDMI
>  config DRM_RCAR_LVDS
>         tristate "R-Car DU LVDS Encoder Support"
>         depends on DRM && DRM_BRIDGE && OF
> +       depends on DRM_RCAR_DU
>         select DRM_PANEL
>         select OF_FLATTREE
>         select OF_OVERLAY
> @@ -47,4 +49,5 @@ config DRM_RCAR_VSP
>
>  config DRM_RCAR_WRITEBACK
>         bool
> +       depends on DRM_RCAR_DU
>         default y if ARM64

Gr{oetje,eeting}s,

                        Geert

Laurent Pinchart March 6, 2020, 2:28 p.m. UTC | #2

Hi Randy,

On Thu, Mar 05, 2020 at 07:17:49PM -0800, Randy Dunlap wrote:
> From: Randy Dunlap <[e-mail]>
> 
> DRM_RCAR_CMM depends on DRM_RCAR_DU. Since the following Kconfig
> symbols do not depend on DRM_RCAR_DU, the menu presentation is
> broken for these and following non-R-Car Kconfig symbols.
> 
> Is it safe/appropriate to make all of these symbols depend on
> DRM_RCAR_DU?  It make the kconfig menu presentation much cleaner.

As those drivers are useless without DRM_RCAR_DU, I'm fine with this
change. It however prevents test-compiling those drivers when
DRM_RCAR_DU is disabled, but I see little reason to do so anyway, I
expect compile tests to aim for as large coverage as possible, and they
should thus enable DRM_RCAR_DU.

Would you like to submit a new version without this question, and
possibly addressing Geert's concern if you think it's appropriate, or
should I do so when applying ?

> Signed-off-by: Randy Dunlap <[e-mail]>
> Cc: Laurent Pinchart <[e-mail]>
> Cc: Kieran Bingham <[e-mail]>
> Cc: [e-mail]
> Cc: [e-mail]
> Cc: Koji Matsuoka <[e-mail]>
> Cc: Dave Airlie <[e-mail]>
> ---
>  drivers/gpu/drm/rcar-du/Kconfig |    3 +++
>  1 file changed, 3 insertions(+)
> 
> --- linux-next-20200305.orig/drivers/gpu/drm/rcar-du/Kconfig
> +++ linux-next-20200305/drivers/gpu/drm/rcar-du/Kconfig
> @@ -24,6 +24,7 @@ config DRM_RCAR_CMM
>  config DRM_RCAR_DW_HDMI
>  	tristate "R-Car DU Gen3 HDMI Encoder Support"
>  	depends on DRM && OF
> +	depends on DRM_RCAR_DU
>  	select DRM_DW_HDMI
>  	help
>  	  Enable support for R-Car Gen3 internal HDMI encoder.
> @@ -31,6 +32,7 @@ config DRM_RCAR_DW_HDMI
>  config DRM_RCAR_LVDS
>  	tristate "R-Car DU LVDS Encoder Support"
>  	depends on DRM && DRM_BRIDGE && OF
> +	depends on DRM_RCAR_DU
>  	select DRM_PANEL
>  	select OF_FLATTREE
>  	select OF_OVERLAY
> @@ -47,4 +49,5 @@ config DRM_RCAR_VSP
>  
>  config DRM_RCAR_WRITEBACK
>  	bool
> +	depends on DRM_RCAR_DU
>  	default y if ARM64

Is this one needed ? The symbol should not be shown in the kconfig menu
as it has no text.

Randy Dunlap March 6, 2020, 3:09 p.m. UTC | #3

On 3/6/20 6:28 AM, Laurent Pinchart wrote:
> Hi Randy,
> 
> On Thu, Mar 05, 2020 at 07:17:49PM -0800, Randy Dunlap wrote:
>> From: Randy Dunlap <[e-mail]>
>>
>> DRM_RCAR_CMM depends on DRM_RCAR_DU. Since the following Kconfig
>> symbols do not depend on DRM_RCAR_DU, the menu presentation is
>> broken for these and following non-R-Car Kconfig symbols.
>>
>> Is it safe/appropriate to make all of these symbols depend on
>> DRM_RCAR_DU?  It make the kconfig menu presentation much cleaner.
> 
> As those drivers are useless without DRM_RCAR_DU, I'm fine with this
> change. It however prevents test-compiling those drivers when
> DRM_RCAR_DU is disabled, but I see little reason to do so anyway, I
> expect compile tests to aim for as large coverage as possible, and they
> should thus enable DRM_RCAR_DU.
> 
> Would you like to submit a new version without this question, and
> possibly addressing Geert's concern if you think it's appropriate, or
> should I do so when applying ?
> 
>> Signed-off-by: Randy Dunlap <[e-mail]>
>> Cc: Laurent Pinchart <[e-mail]>
>> Cc: Kieran Bingham <[e-mail]>
>> Cc: [e-mail]
>> Cc: [e-mail]
>> Cc: Koji Matsuoka <[e-mail]>
>> Cc: Dave Airlie <[e-mail]>
>> ---
>>  drivers/gpu/drm/rcar-du/Kconfig |    3 +++
>>  1 file changed, 3 insertions(+)
>>
>> --- linux-next-20200305.orig/drivers/gpu/drm/rcar-du/Kconfig
>> +++ linux-next-20200305/drivers/gpu/drm/rcar-du/Kconfig
>> @@ -24,6 +24,7 @@ config DRM_RCAR_CMM
>>  config DRM_RCAR_DW_HDMI
>>  	tristate "R-Car DU Gen3 HDMI Encoder Support"
>>  	depends on DRM && OF
>> +	depends on DRM_RCAR_DU
>>  	select DRM_DW_HDMI
>>  	help
>>  	  Enable support for R-Car Gen3 internal HDMI encoder.
>> @@ -31,6 +32,7 @@ config DRM_RCAR_DW_HDMI
>>  config DRM_RCAR_LVDS
>>  	tristate "R-Car DU LVDS Encoder Support"
>>  	depends on DRM && DRM_BRIDGE && OF
>> +	depends on DRM_RCAR_DU
>>  	select DRM_PANEL
>>  	select OF_FLATTREE
>>  	select OF_OVERLAY
>> @@ -47,4 +49,5 @@ config DRM_RCAR_VSP
>>  
>>  config DRM_RCAR_WRITEBACK
>>  	bool
>> +	depends on DRM_RCAR_DU
>>  	default y if ARM64
> 
> Is this one needed ? The symbol should not be shown in the kconfig menu
> as it has no text.

Hi Laurent,
I tried the patch without that line as my first attempt and there was
still a problem with the menu, so I will resubmit the patch using a block
as Geert suggested.

thanks.

Patch

--- linux-next-20200305.orig/drivers/gpu/drm/rcar-du/Kconfig
+++ linux-next-20200305/drivers/gpu/drm/rcar-du/Kconfig
@@ -24,6 +24,7 @@  config DRM_RCAR_CMM
 config DRM_RCAR_DW_HDMI
 	tristate "R-Car DU Gen3 HDMI Encoder Support"
 	depends on DRM && OF
+	depends on DRM_RCAR_DU
 	select DRM_DW_HDMI
 	help
 	  Enable support for R-Car Gen3 internal HDMI encoder.
@@ -31,6 +32,7 @@  config DRM_RCAR_DW_HDMI
 config DRM_RCAR_LVDS
 	tristate "R-Car DU LVDS Encoder Support"
 	depends on DRM && DRM_BRIDGE && OF
+	depends on DRM_RCAR_DU
 	select DRM_PANEL
 	select OF_FLATTREE
 	select OF_OVERLAY
@@ -47,4 +49,5 @@  config DRM_RCAR_VSP
 
 config DRM_RCAR_WRITEBACK
 	bool
+	depends on DRM_RCAR_DU
 	default y if ARM64