diff mbox series

arm64: dts: renesas: condor: switch from EtherAVB to GEther

Message ID 4f9e79ca-5d61-8dd4-fe79-42e8f7562f90@cogentembedded.com (mailing list archive)
State Accepted
Commit eab53fdfd60a84b0cc514d4f1f5d79226c76df01
Delegated to: Simon Horman
Headers show
Series arm64: dts: renesas: condor: switch from EtherAVB to GEther | expand

Commit Message

Sergei Shtylyov Oct. 18, 2018, 4:48 p.m. UTC
The "official" Condor boards have always been wired to mount NFS via
GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
to Cogent Embedded, so we've been having an unpleasant situation where
a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
extension board is plugged in). Switch from EtherAVB to GEther at last!

Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
The patch is against Linus' 'linux.git' repo -- coulan't find a fitting
brancxh in Simon Horman's 'renesas.git' repo...

 arch/arm64/boot/dts/renesas/r8a77980-condor.dts |   47 ++++++++++++------------
 1 file changed, 24 insertions(+), 23 deletions(-)

Comments

Simon Horman Oct. 31, 2018, 2:30 p.m. UTC | #1
On Thu, Oct 18, 2018 at 07:48:53PM +0300, Sergei Shtylyov wrote:
> The "official" Condor boards have always been wired to mount NFS via
> GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
> to Cogent Embedded, so we've been having an unpleasant situation where
> a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
> extension board is plugged in). Switch from EtherAVB to GEther at last!
> 
> Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support")
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Thanks, applied for v4.21.
Sergei Shtylyov Oct. 31, 2018, 5:29 p.m. UTC | #2
On 10/31/2018 5:30 PM, Simon Horman wrote:

>> The "official" Condor boards have always been wired to mount NFS via
>> GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
>> to Cogent Embedded, so we've been having an unpleasant situation where
>> a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
>> extension board is plugged in). Switch from EtherAVB to GEther at last!
>>
>> Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support")
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Thanks, applied for v4.21.

    Wait, this was intended as a fix for 4.20...

MBR, Sergei
Simon Horman Nov. 2, 2018, 11:25 a.m. UTC | #3
On Wed, Oct 31, 2018 at 08:29:50PM +0300, Sergei Shtylyov wrote:
> On 10/31/2018 5:30 PM, Simon Horman wrote:
> 
> > > The "official" Condor boards have always been wired to mount NFS via
> > > GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
> > > to Cogent Embedded, so we've been having an unpleasant situation where
> > > a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
> > > extension board is plugged in). Switch from EtherAVB to GEther at last!
> > > 
> > > Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support")
> > > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> > 
> > Thanks, applied for v4.21.
> 
>    Wait, this was intended as a fix for 4.20...

Thanks, I have re-queued this as a fix for v4.20.
diff mbox series

Patch

Index: linux/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
===================================================================
--- linux.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ linux/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -15,7 +15,7 @@ 
 
 	aliases {
 		serial0 = &scif0;
-		ethernet0 = &avb;
+		ethernet0 = &gether;
 	};
 
 	chosen {
@@ -47,23 +47,6 @@ 
 	};
 };
 
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy0>;
-	renesas,no-ether-link;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
 &canfd {
 	pinctrl-0 = <&canfd0_pins>;
 	pinctrl-names = "default";
@@ -82,6 +65,23 @@ 
 	clock-frequency = <32768>;
 };
 
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
@@ -118,16 +118,17 @@ 
 };
 
 &pfc {
-	avb_pins: avb {
-		groups = "avb_mdio", "avb_rgmii";
-		function = "avb";
-	};
-
 	canfd0_pins: canfd0 {
 		groups = "canfd0_data_a";
 		function = "canfd0";
 	};
 
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
 	i2c0_pins: i2c0 {
 		groups = "i2c0";
 		function = "i2c0";