| Message ID | 6793280eb1a3376a1aa4d408a8931202050c828d.1615454845.git.matti.vaittinen@fi.rohmeurope.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Extend regulator notification support | expand |
On Thu, 11 Mar 2021 12:23:33 +0200, Matti Vaittinen wrote: > BD9576MUF provides over-current protection and detection. Current is > measured as voltage loss over external FET. Allow specifying FET's on > resistance so current monitoring limits can be converted to voltages. > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > --- > v3: > - no changes > v2: > - use standard micro-ohms suffix > > .../devicetree/bindings/regulator/rohm,bd9576-regulator.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml:31:35: [error] empty value in block mapping (empty-values) dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties:description: "External FET's ON-resistance. Required if VoutS1 OCP/OCW is to be set." is not of type 'object', 'boolean' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties:rohm,ocw-fet-ron-micro-ohms: None is not of type 'object', 'boolean' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties: {'enum': ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'if', 'items', 'maxItems', 'maximum', 'minItems', 'minimum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'propertyNames', 'required', 'then', 'unevaluatedProperties']} is not allowed for 'description' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: ignoring, error in schema: patternProperties: regulator-.+: properties: rohm,ocw-fet-ron-micro-ohms warning: no schema found in file: ./Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml See https://patchwork.ozlabs.org/patch/1451051 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml index b6515a0cee62..9c119c1b1904 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -27,6 +27,11 @@ patternProperties: Properties for single regulator. $ref: "regulator.yaml#" + properties: + rohm,ocw-fet-ron-micro-ohms: + description: External FET's ON-resistance. Required if VoutS1 OCP/OCW is + to be set. + required: - regulator-name
BD9576MUF provides over-current protection and detection. Current is measured as voltage loss over external FET. Allow specifying FET's on resistance so current monitoring limits can be converted to voltages. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- v3: - no changes v2: - use standard micro-ohms suffix .../devicetree/bindings/regulator/rohm,bd9576-regulator.yaml | 5 +++++ 1 file changed, 5 insertions(+)