@@ -92,11 +92,11 @@ config DRM_FSL_LDB
config DRM_ITE_IT6505
tristate "ITE IT6505 DisplayPort bridge"
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HDCP_HELPER
+ select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
select EXTCON
select CRYPTO
@@ -225,10 +225,10 @@ config DRM_PARADE_PS8622
config DRM_PARADE_PS8640
tristate "Parade PS8640 MIPI DSI to eDP Converter"
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
select DRM_MIPI_DSI
select DRM_PANEL
@@ -380,7 +380,6 @@ config DRM_TI_SN65DSI83
config DRM_TI_SN65DSI86
tristate "TI SN65DSI86 DSI to eDP bridge"
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
@@ -389,6 +388,7 @@ config DRM_TI_SN65DSI86
select DRM_PANEL
select DRM_MIPI_DSI
select AUXILIARY_BUS
+ select DRM_DISPLAY_DP_AUX_BUS
help
Texas Instruments SN65DSI86 DSI to eDP Bridge driver
@@ -33,11 +33,11 @@ config DRM_ANALOGIX_DP
config DRM_ANALOGIX_ANX7625
tristate "Analogix Anx7625 MIPI to DP interface support"
depends on DRM
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HDCP_HELPER
+ select DRM_DISPLAY_DP_AUX_BUS
select DRM_MIPI_DSI
help
ANX7625 is an ultra-low power 4K mobile HD transmitter
@@ -11,7 +11,6 @@ config DRM_DISPLAY_DP_AUX_BUS
tristate "DRM DisplayPort AUX bus support"
depends on DRM
depends on OF || COMPILE_TEST
- default y
config DRM_DISPLAY_DP_AUX_CEC
bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
@@ -22,11 +22,11 @@ config DRM_MEDIATEK
config DRM_MEDIATEK_DP
tristate "DRM DPTX Support for MediaTek SoCs"
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on DRM_MEDIATEK
select PHY_MTK_DP
select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_DP_AUX_BUS
help
DRM/KMS Display Port driver for MediaTek SoCs.
@@ -5,7 +5,6 @@ config DRM_MSM
depends on ARCH_QCOM || SOC_IMX5 || COMPILE_TEST
depends on COMMON_CLK
depends on DRM
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on IOMMU_SUPPORT
depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
@@ -16,6 +15,7 @@ config DRM_MSM
select IOMMU_IO_PGTABLE
select QCOM_MDT_LOADER if ARCH_QCOM
select REGULATOR
+ select DRM_DISPLAY_DP_AUX_BUS
select DRM_DISPLAY_DP_HELPER
select DRM_EXEC
select DRM_KMS_HELPER
@@ -571,11 +571,11 @@ config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
config DRM_PANEL_SAMSUNG_ATNA33XC20
tristate "Samsung ATNA33XC20 eDP panel"
depends on BACKLIGHT_CLASS_DEVICE
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
depends on PM
select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_DP_AUX_BUS
help
DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
be handled by the DRM_PANEL_SIMPLE driver because its power
@@ -811,12 +811,12 @@ config DRM_PANEL_STARTEK_KD070FHFID015
config DRM_PANEL_EDP
tristate "support for simple Embedded DisplayPort panels"
depends on BACKLIGHT_CLASS_DEVICE
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
depends on PM
select VIDEOMODE_HELPERS
select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
help
DRM panel driver for dumb eDP panels that need at most a regulator and
@@ -4,11 +4,11 @@ config DRM_TEGRA
depends on ARCH_TEGRA || COMPILE_TEST
depends on COMMON_CLK
depends on DRM
- depends on DRM_DISPLAY_DP_AUX_BUS
depends on DRM_DISPLAY_HELPER
depends on OF
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HDMI_HELPER
+ select DRM_DISPLAY_DP_AUX_BUS
select DRM_KMS_HELPER
select DRM_MIPI_DSI
select DRM_PANEL
This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/gpu/drm/bridge/Kconfig | 6 +++--- drivers/gpu/drm/bridge/analogix/Kconfig | 2 +- drivers/gpu/drm/display/Kconfig | 1 - drivers/gpu/drm/mediatek/Kconfig | 2 +- drivers/gpu/drm/msm/Kconfig | 2 +- drivers/gpu/drm/panel/Kconfig | 4 ++-- drivers/gpu/drm/tegra/Kconfig | 2 +- 7 files changed, 9 insertions(+), 10 deletions(-)