@@ -91,8 +91,12 @@ r8a779g0-white-hawk-ard-audio-da7212-dtbs := r8a779g0-white-hawk.dtb white-hawk-
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtb
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single.dtb
+r8a779g2-white-hawk-single-ard-audio-da7212-dtbs := r8a779g2-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single-ard-audio-da7212.dtb
dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single.dtb
+r8a779g3-white-hawk-single-ard-audio-da7212-dtbs := r8a779g3-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single-ard-audio-da7212.dtb
dtb-$(CONFIG_ARCH_R8A779H0) += r8a779h0-gray-hawk-single.dtb
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the White Hawk board with ARD-AUDIO-DA7212 Board
+ * Device Tree Source for the White Hawk (Single) board with ARD-AUDIO-DA7212
+ * Board
*
* You can find and buy "ARD-AUDIO-DA7212" at Digi-Key
*
@@ -27,12 +28,12 @@
* +----------------------------+
* |Breakout board |
* | | +---------------+
- * |CN34 (I2C CN) | |J1 |
+ * |CN(30)34 (I2C CN) | |J1 |
* | I2C0_SCL pin3 |<----->| pin20 SCL |
* | I2C0_SDA pin5 |<----->| pin18 SDA |
* | | +---------------+
* | | +-----------------------+
- * |CN4 (Power) | |J7 |
+ * |CN(300)4 (Power) | |J7 |
* | 3v3 (v) pin9 |<----->| pin4 / pin8 3.3v |
* | GND (v) pin3 / pin4 |<----->| pin12 / pin14 GND |
* +----------------------------+ +-----------------------+
White Hawk Single boards can use the same ARD-AUDIO-DA7212 external audio board as the White Hawk board stack. Add support for building DTBs for them, and document the small differences in connector labels. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/Makefile | 4 ++++ .../boot/dts/renesas/white-hawk-ard-audio-da7212.dtso | 7 ++++--- 2 files changed, 8 insertions(+), 3 deletions(-)