new file mode 100644
@@ -0,0 +1,54 @@
+Simple-Graph-Card:
+
+Simple-Graph-Card specifies audio DAI connections of SoC <-> codec.
+It is based on common bindings for device graphs.
+see ${LINUX}/Documentation/devicetree/bindings/graph.txt
+
+Basically, Simple-Graph-Card is same as Simple-Card, but using graph style.
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+
+Below are same as Simple-Card.
+
+- simple-audio-card,name
+- simple-audio-card,widgets
+- simple-audio-card,routing
+- simple-audio-card,mclk-fs
+- simple-audio-card,hp-det-gpio
+- simple-audio-card,mic-det-gpio
+- simple-audio-card,format
+- simple-audio-card,frame-master
+- simple-audio-card,bitclock-master
+- simple-audio-card,bitclock-inversion
+- simple-audio-card,frame-inversion
+- simple-audio-card,mclk-fs
+- simple-audio-card,dai-tdm-slot-num
+- simple-audio-card,dai-tdm-slot-width
+- clocks / system-clock-frequency
+
+Example
+
+ak4643: codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ ...
+ port {
+ ak4643_port: endpoint {
+ remote-endpoint = <&rcar_ak4643_port>;
+ clocks = <&audio_clock>;
+ };
+ };
+};
+
+rcar_sound {
+ ...
+ port {
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&ak4643_port>;
+ simple-audio-card,frame-master = <&ak4643_port>;
+
+ rcar_ak4643_port: endpoint {
+ remote-endpoint = <&ak4643_port>;
+ playback = <&ssi0 &src2 &dvc0>;
+ capture = <&ssi1 &src3 &dvc1>;
+ };
+ };
+};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> --- .../bindings/sound/simple-graph-card.txt | 54 ++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/simple-graph-card.txt