@@ -56,7 +56,7 @@ config PINCTRL_SH_PFC
This enables pin control drivers for Renesas SuperH and ARM platforms
config PINCTRL_RZA1
- bool "RZ/A1 gpio and pinctrl driver"
+ bool "gpio and pinctrl driver for RZ/A1"
depends on OF
depends on ARCH_R7S72100 || COMPILE_TEST
select GPIOLIB
@@ -67,7 +67,7 @@ config PINCTRL_RZA1
This selects pinctrl driver for Renesas RZ/A1 platforms.
config PINCTRL_RZA2
- bool "RZ/A2 gpio and pinctrl driver"
+ bool "gpio and pinctrl driver for RZ/A2"
depends on OF
depends on ARCH_R7S9210 || COMPILE_TEST
select GPIOLIB
@@ -78,7 +78,7 @@ config PINCTRL_RZA2
This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms.
config PINCTRL_RZN1
- bool "RZ/N1 pinctrl driver"
+ bool "pin control support for RZ/N1"
depends on OF
depends on ARCH_RZN1 || COMPILE_TEST
select GENERIC_PINCTRL_GROUPS
@@ -100,142 +100,142 @@ config PINCTRL_SH_FUNC_GPIO
This enables legacy function GPIOs for SH platforms
config PINCTRL_PFC_EMEV2
- bool "Emma Mobile EV2 pin control support" if COMPILE_TEST
+ bool "pin control support for Emma Mobile EV2" if COMPILE_TEST
config PINCTRL_PFC_R8A73A4
- bool "R-Mobile APE6 pin control support" if COMPILE_TEST
+ bool "pin control support for R-Mobile APE6" if COMPILE_TEST
select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_R8A7740
- bool "R-Mobile A1 pin control support" if COMPILE_TEST
+ bool "pin control support for R-Mobile A1" if COMPILE_TEST
select PINCTRL_SH_PFC_GPIO
config PINCTRL_PFC_R8A7742
- bool "RZ/G1H pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G1H" if COMPILE_TEST
config PINCTRL_PFC_R8A7743
- bool "RZ/G1M pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G1M" if COMPILE_TEST
config PINCTRL_PFC_R8A7744
- bool "RZ/G1N pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G1N" if COMPILE_TEST
config PINCTRL_PFC_R8A7745
- bool "RZ/G1E pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G1E" if COMPILE_TEST
config PINCTRL_PFC_R8A77470
- bool "RZ/G1C pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G1C" if COMPILE_TEST
config PINCTRL_PFC_R8A774A1
- bool "RZ/G2M pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G2M" if COMPILE_TEST
config PINCTRL_PFC_R8A774B1
- bool "RZ/G2N pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G2N" if COMPILE_TEST
config PINCTRL_PFC_R8A774C0
- bool "RZ/G2E pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G2E" if COMPILE_TEST
config PINCTRL_PFC_R8A774E1
- bool "RZ/G2H pin control support" if COMPILE_TEST
+ bool "pin control support for RZ/G2H" if COMPILE_TEST
config PINCTRL_PFC_R8A7778
- bool "R-Car M1A pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car M1A" if COMPILE_TEST
config PINCTRL_PFC_R8A7779
- bool "R-Car H1 pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car H1" if COMPILE_TEST
config PINCTRL_PFC_R8A7790
- bool "R-Car H2 pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car H2" if COMPILE_TEST
config PINCTRL_PFC_R8A7791
- bool "R-Car M2-W pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car M2-W" if COMPILE_TEST
config PINCTRL_PFC_R8A7792
- bool "R-Car V2H pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car V2H" if COMPILE_TEST
config PINCTRL_PFC_R8A7793
- bool "R-Car M2-N pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car M2-N" if COMPILE_TEST
config PINCTRL_PFC_R8A7794
- bool "R-Car E2 pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car E2" if COMPILE_TEST
config PINCTRL_PFC_R8A77950
- bool "R-Car H3 ES1.x pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car H3 ES1.x" if COMPILE_TEST
config PINCTRL_PFC_R8A77951
- bool "R-Car H3 ES2.0+ pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car H3 ES2.0+" if COMPILE_TEST
config PINCTRL_PFC_R8A77960
- bool "R-Car M3-W pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car M3-W" if COMPILE_TEST
config PINCTRL_PFC_R8A77961
- bool "R-Car M3-W+ pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car M3-W+" if COMPILE_TEST
config PINCTRL_PFC_R8A77965
- bool "R-Car M3-N pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car M3-N" if COMPILE_TEST
config PINCTRL_PFC_R8A77970
- bool "R-Car V3M pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car V3M" if COMPILE_TEST
config PINCTRL_PFC_R8A77980
- bool "R-Car V3H pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car V3H" if COMPILE_TEST
config PINCTRL_PFC_R8A77990
- bool "R-Car E3 pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car E3" if COMPILE_TEST
config PINCTRL_PFC_R8A77995
- bool "R-Car D3 pin control support" if COMPILE_TEST
+ bool "pin control support for R-Car D3" if COMPILE_TEST
config PINCTRL_PFC_SH7203
- bool "SH7203 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7203" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7264
- bool "SH7264 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7264" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7269
- bool "SH7269 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7269" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH73A0
- bool "SH-Mobile AG5 pin control support" if COMPILE_TEST
+ bool "pin control support for SH-Mobile AG5" if COMPILE_TEST
select PINCTRL_SH_PFC_GPIO
select REGULATOR
config PINCTRL_PFC_SH7720
- bool "SH7720 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7720" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7722
- bool "SH7722 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7722" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7723
- bool "SH-Mobile R2 pin control support" if COMPILE_TEST
+ bool "pin control support for SH-Mobile R2" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7724
- bool "SH-Mobile R2R pin control support" if COMPILE_TEST
+ bool "pin control support for SH-Mobile R2R" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7734
- bool "SH7734 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7734" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7757
- bool "SH7757 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7757" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7785
- bool "SH7785 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7785" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SH7786
- bool "SH7786 pin control support" if COMPILE_TEST
+ bool "pin control support for SH7786" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
config PINCTRL_PFC_SHX3
- bool "SH-X3 pin control support" if COMPILE_TEST
+ bool "pin control support for SH-X3" if COMPILE_TEST
select PINCTRL_SH_FUNC_GPIO
endmenu