diff mbox series

[32/53] arm64: dts: renesas: r8a774a1: Add PCIe device nodes

Message ID a5a41d50ffe77d250655f767eb192dbbc387edd7.1561107232.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit a5a41d50ffe77d250655f767eb192dbbc387edd7
Delegated to: Simon Horman
Headers show
Series [GIT,PULL] Renesas ARM64 Based SoC DT Updates for v5.3 | expand

Commit Message

Simon Horman June 21, 2019, 9:16 a.m. UTC 
From: Biju Das <biju.das@bp.renesas.com>

This patch adds PCIe{0,1} device nodes for R8A774A1 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 54 +++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 4b1332feaae5..eb9f299ff8db 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1914,6 +1914,60 @@ 
 			resets = <&cpg 408>;
 		};
 
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
 		fdp1@fe940000 {
 			compatible = "renesas,fdp1";
 			reg = <0 0xfe940000 0 0x2400>;