diff mbox series

[RFT,4/5] sh_eth: add sh_eth_cpu_data::gecmr flag

Message ID bea798e8-c1dc-1170-a8af-6e3749714651@cogentembedded.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series sh_eth: get rid of the dedicated regiseter mapping for RZ/A1 (R7S72100) | expand

Commit Message

Sergei Shtylyov Feb. 3, 2020, 7:49 p.m. UTC 
Not all Ether controllers having the Gigabit register layout have GECMR --
RZ/A1 (AKA R7S72100) actually has the same layout but no Gigabit speed
support and hence no GECMR. In the past, the new register map table was
added for this SoC, now I think we should have used the existing Gigabit
table with the differences (such as GECMR) covered by the mere flags in
the 'struct sh_eth_cpu_data'. Add such flag for GECMR -- and then we can
get rid of the R7S72100 specific layout in the next patch...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 drivers/net/ethernet/renesas/sh_eth.c |   14 +++++++++++++-
 drivers/net/ethernet/renesas/sh_eth.h |    1 +
 2 files changed, 14 insertions(+), 1 deletion(-)
diff mbox series

Patch

Index: net-next/drivers/net/ethernet/renesas/sh_eth.c
===================================================================
--- net-next.orig/drivers/net/ethernet/renesas/sh_eth.c
+++ net-next/drivers/net/ethernet/renesas/sh_eth.c
@@ -569,6 +569,9 @@  static void sh_eth_set_rate_gether(struc
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
+	if (WARN_ON(!mdp->cd->gecmr))
+		return;
+
 	switch (mdp->speed) {
 	case 10: /* 10BASE */
 		sh_eth_write(ndev, GECMR_10, GECMR);
@@ -663,6 +666,7 @@  static struct sh_eth_cpu_data r8a7740_da
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
@@ -788,6 +792,7 @@  static struct sh_eth_cpu_data r8a77980_d
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.nbst		= 1,
@@ -957,6 +962,9 @@  static void sh_eth_set_rate_giga(struct
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
+	if (WARN_ON(!mdp->cd->gecmr))
+		return;
+
 	switch (mdp->speed) {
 	case 10: /* 10BASE */
 		sh_eth_write(ndev, 0x00000000, GECMR);
@@ -1002,6 +1010,7 @@  static struct sh_eth_cpu_data sh7757_dat
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.rpadir		= 1,
@@ -1042,6 +1051,7 @@  static struct sh_eth_cpu_data sh7734_dat
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.no_trimd	= 1,
@@ -1083,6 +1093,7 @@  static struct sh_eth_cpu_data sh7763_dat
 	.apr		= 1,
 	.mpr		= 1,
 	.tpauser	= 1,
+	.gecmr		= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
 	.no_trimd	= 1,
@@ -2181,7 +2192,8 @@  static size_t __sh_eth_get_regs(struct n
 	if (cd->tpauser)
 		add_reg(TPAUSER);
 	add_reg(TPAUSECR);
-	add_reg(GECMR);
+	if (cd->gecmr)
+		add_reg(GECMR);
 	if (cd->bculr)
 		add_reg(BCULR);
 	add_reg(MAHR);
Index: net-next/drivers/net/ethernet/renesas/sh_eth.h
===================================================================
--- net-next.orig/drivers/net/ethernet/renesas/sh_eth.h
+++ net-next/drivers/net/ethernet/renesas/sh_eth.h
@@ -490,6 +490,7 @@  struct sh_eth_cpu_data {
 	unsigned apr:1;		/* EtherC has APR */
 	unsigned mpr:1;		/* EtherC has MPR */
 	unsigned tpauser:1;	/* EtherC has TPAUSER */
+	unsigned gecmr:1;	/* EtherC has GECMR */
 	unsigned bculr:1;	/* EtherC has BCULR */
 	unsigned tsu:1;		/* EtherC has TSU */
 	unsigned hw_swap:1;	/* E-DMAC has DE bit in EDMR */