From patchwork Thu Feb 25 23:52:57 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Horman X-Patchwork-Id: 8427901 Return-Path: X-Original-To: patchwork-linux-renesas-soc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 9D4E39FC33 for ; Thu, 25 Feb 2016 23:53:24 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 17FF820268 for ; Thu, 25 Feb 2016 23:53:24 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7248620266 for ; Thu, 25 Feb 2016 23:53:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752542AbcBYXxX (ORCPT ); Thu, 25 Feb 2016 18:53:23 -0500 Received: from kirsty.vergenet.net ([202.4.237.240]:42563 "EHLO kirsty.vergenet.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752375AbcBYXxW (ORCPT ); Thu, 25 Feb 2016 18:53:22 -0500 Received: from penelope.kanocho.kobe.vergenet.net (aa046235.ppp.asahi-net.or.jp [110.5.46.235]) by kirsty.vergenet.net (Postfix) with ESMTPSA id 3B9D025BE88; Fri, 26 Feb 2016 10:53:15 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=verge.net.au; s=mail; t=1456444395; bh=zOntSgpYsHdEA8ZNRwSJ4e0GeCKcjF+sfYRaZjrLcaE=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=CXOMm2MRlM9gJR3ToVrzJUzbmyf0i91F2zOGw7SgUZ71zl42iazMQQruq4Ucekjd1 q7AD32/H6GQdjFCAZow1tvQo/P5UnxKu+AxqzQmDUN/jRfFl2fkBWFlu1deBV7blS2 fYHjKifFPjHxgLn8U8LcjDf1ejEBTov3oNIBHKXw= Received: by penelope.kanocho.kobe.vergenet.net (Postfix, from userid 7100) id 430EC60D25; Fri, 26 Feb 2016 10:53:10 +1100 (AEDT) From: Simon Horman To: linux-renesas-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Magnus Damm , Kuninori Morimoto , Simon Horman Subject: [PATCH 08/19] ARM: dts: r8a7791: enable to use thermal-zone Date: Fri, 26 Feb 2016 08:52:57 +0900 Message-Id: X-Mailer: git-send-email 2.7.0.rc3.207.g0ac5344 In-Reply-To: References: Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org X-Spam-Status: No, score=-1.8 required=5.0 tests=BAYES_00,DKIM_SIGNED, UNPARSEABLE_RELAY autolearn=no version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Kuninori Morimoto This patch enables to use thermal-zone on r8a7791. This thermal sensor can measure temperature from -40000 to 125000, but over 117000 can be critical on this chip. Thus, default critical temperature is now set as 115000 (this driver is using 5000 steps) (Current critical temperature is using it as 90000, but there is no big reason about it) And it doesn't check thermal zone periodically (same as current behavior). You can exchange it by modifying polling-delay[-passive] property. You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS, but you need to take care to use it, since it will call orderly_poweroff() it it reaches to the value. echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 8910236e64bf..f1732dde114b 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -69,6 +69,25 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -185,12 +204,15 @@ power-domains = <&cpg_clocks>; }; - thermal@e61f0000 { - compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal"; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7791", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = ; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; power-domains = <&cpg_clocks>; + #thermal-sensor-cells = <0>; }; timer {