| Message ID | 20221017210542.979051-1-cristian.ciocaltea@collabora.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Enable initial support for StarFive VisionFive V1 SBC | expand |
On Tue, Oct 18, 2022 at 12:05:39AM +0300, Cristian Ciocaltea wrote: > The StarFive VisionFive V1 SBC [1] is similar with the already supported > BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. > > In addition to documenting the necessary compatibles, this patch series > moves most of the content from jh7100-beaglev-starlight.dts to a new file > jh7100-common.dtsi, to be shared between the two boards. > > No other changes are required in order to successfully boot the board. > > [1] https://github.com/starfive-tech/VisionFive Hey Cristian, Apologies for the delay here, we've been sorting out re-routing RISC-V DT stuff via the SoC tree. That should be sorted now, so I have picked the series up. Should be at: https://git.kernel.org/conor/c/a3fe69160c7328a284ebc711ccb689f3beec42dc Thanks, Conor. > > Changes in v4: > - Rebased onto v6.1.0-rc1 > - Fixed a conflict in patch 2/3 as pinctrl-starfive.h has been renamed > to pinctrl-starfive-jh7100.h > > Changes in v3: > - Added Reviewed-by tag from Krzysztof in patch 1/3 > - Optimized patch 2/3 by enabling copy detection on "git format-patch", > as indicated by Krzysztof > > Changes in v2: > - Simplified documentation by using 'enum' instead of 'const' in > patch 1/3, according to Conor's review > - Added Reviewed-by tags from Conor > > Cristian Ciocaltea (3): > dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board > riscv: dts: starfive: Add common DT for JH7100 based boards > riscv: dts: starfive: Add StarFive VisionFive V1 device tree > > .../devicetree/bindings/riscv/starfive.yaml | 4 +- > arch/riscv/boot/dts/starfive/Makefile | 2 +- > .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- > ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - > .../jh7100-starfive-visionfive-v1.dts | 20 +++ > 5 files changed, 25 insertions(+), 157 deletions(-) > copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) > create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts > > > base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780 > -- > 2.38.0 >
On 11/16/22 19:50, Conor Dooley wrote: > On Tue, Oct 18, 2022 at 12:05:39AM +0300, Cristian Ciocaltea wrote: >> The StarFive VisionFive V1 SBC [1] is similar with the already supported >> BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. >> >> In addition to documenting the necessary compatibles, this patch series >> moves most of the content from jh7100-beaglev-starlight.dts to a new file >> jh7100-common.dtsi, to be shared between the two boards. >> >> No other changes are required in order to successfully boot the board. >> >> [1] https://github.com/starfive-tech/VisionFive > > Hey Cristian, > > Apologies for the delay here, we've been sorting out re-routing RISC-V > DT stuff via the SoC tree. That should be sorted now, so I have picked > the series up. Should be at: > https://git.kernel.org/conor/c/a3fe69160c7328a284ebc711ccb689f3beec42dc Hi Conor, No problem, thanks for taking care of this! Regards, Cristian > Thanks, > Conor. > >> >> Changes in v4: >> - Rebased onto v6.1.0-rc1 >> - Fixed a conflict in patch 2/3 as pinctrl-starfive.h has been renamed >> to pinctrl-starfive-jh7100.h >> >> Changes in v3: >> - Added Reviewed-by tag from Krzysztof in patch 1/3 >> - Optimized patch 2/3 by enabling copy detection on "git format-patch", >> as indicated by Krzysztof >> >> Changes in v2: >> - Simplified documentation by using 'enum' instead of 'const' in >> patch 1/3, according to Conor's review >> - Added Reviewed-by tags from Conor >> >> Cristian Ciocaltea (3): >> dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board >> riscv: dts: starfive: Add common DT for JH7100 based boards >> riscv: dts: starfive: Add StarFive VisionFive V1 device tree >> >> .../devicetree/bindings/riscv/starfive.yaml | 4 +- >> arch/riscv/boot/dts/starfive/Makefile | 2 +- >> .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- >> ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - >> .../jh7100-starfive-visionfive-v1.dts | 20 +++ >> 5 files changed, 25 insertions(+), 157 deletions(-) >> copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) >> create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts >> >> >> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780 >> -- >> 2.38.0 >>
The StarFive VisionFive V1 SBC [1] is similar with the already supported BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC. In addition to documenting the necessary compatibles, this patch series moves most of the content from jh7100-beaglev-starlight.dts to a new file jh7100-common.dtsi, to be shared between the two boards. No other changes are required in order to successfully boot the board. [1] https://github.com/starfive-tech/VisionFive Changes in v4: - Rebased onto v6.1.0-rc1 - Fixed a conflict in patch 2/3 as pinctrl-starfive.h has been renamed to pinctrl-starfive-jh7100.h Changes in v3: - Added Reviewed-by tag from Krzysztof in patch 1/3 - Optimized patch 2/3 by enabling copy detection on "git format-patch", as indicated by Krzysztof Changes in v2: - Simplified documentation by using 'enum' instead of 'const' in patch 1/3, according to Conor's review - Added Reviewed-by tags from Conor Cristian Ciocaltea (3): dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board riscv: dts: starfive: Add common DT for JH7100 based boards riscv: dts: starfive: Add StarFive VisionFive V1 device tree .../devicetree/bindings/riscv/starfive.yaml | 4 +- arch/riscv/boot/dts/starfive/Makefile | 2 +- .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +----------------- ...aglev-starlight.dts => jh7100-common.dtsi} | 3 - .../jh7100-starfive-visionfive-v1.dts | 20 +++ 5 files changed, 25 insertions(+), 157 deletions(-) copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%) create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780