mbox series

[v2,0/5] Basic pinctrl support for StarFive JH7110 RISC-V SoC

Message ID 20221118011108.70715-1-hal.feng@starfivetech.com (mailing list archive)
Headers show
Series Basic pinctrl support for StarFive JH7110 RISC-V SoC | expand

Message

Hal Feng Nov. 18, 2022, 1:11 a.m. UTC 
The original patch series "Basic StarFive JH7110 RISC-V SoC support" [1]
is split into 3 patch series. They respectively add basic clock&reset,
pinctrl and device tree support for StarFive JH7110 SoC. These patch
series are independent, but the Visionfive2 board can boot up successfully
only if all these patches series applied. This one adds basic pinctrl
support. This patch series is pulled out from the patch 22~26 of v1 [1].
You can simply get or review the patches at the link [2].

[1]: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
[2]: https://github.com/hal-feng/linux/commits/visionfive2-minimal

Changes since v1:
- Rebased on tag v6.1-rc5.
- Dropped patch 22 and 23 since they were merged in v6.1-rc1.
- Removed some unused macros and register values which do not belong to
  bindings. Simplified pinctrl definitions in patch 24. (by Krzysztof)
- Split the bindings into sys pinctrl bindings and aon pinctrl bindings,
  and split patch 25 into two patches.
- Made the bindings follow generic pinctrl bindings. (by Krzysztof)
- Fixed some wrong indentation in bindings, and checked it with
  `make dt_binding_check`.
- Split the patch 26 into two patches which added sys and aon pinctrl
  driver respectively.
- Restructured the pinctrl drivers so made them follow generic pinctrl
  bindings. Rewrote `dt_node_to_map` and extracted the public code to make
  it clearer.

  v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/

Jianlong Huang (5):
  dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions
  dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
  dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
  pinctrl: starfive: Add StarFive JH7110 sys controller driver
  pinctrl: starfive: Add StarFive JH7110 aon controller driver

 .../pinctrl/starfive,jh7110-aon-pinctrl.yaml  | 134 +++
 .../pinctrl/starfive,jh7110-sys-pinctrl.yaml  | 165 +++
 MAINTAINERS                                   |   7 +-
 drivers/pinctrl/starfive/Kconfig              |  21 +
 drivers/pinctrl/starfive/Makefile             |   5 +
 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 192 ++++
 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 464 +++++++++
 drivers/pinctrl/starfive/pinctrl-starfive.c   | 972 ++++++++++++++++++
 drivers/pinctrl/starfive/pinctrl-starfive.h   |  72 ++
 .../pinctrl/pinctrl-starfive-jh7110.h         | 427 ++++++++
 10 files changed, 2456 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
 create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h


base-commit: 094226ad94f471a9f19e8f8e7140a09c2625abaa
prerequisite-patch-id: 6b1b43a55b9773bec61ab6c1bbaa54dccbac0837
prerequisite-patch-id: 09c98554df52d17ba5fd604125f8cdd62cbe80d1
prerequisite-patch-id: 29fe0b0c19b6f0cd31114ee9fe17fe9732047f33
prerequisite-patch-id: c59d9908de90e09ba2b9a81aadbf9fb9f00c8f04
prerequisite-patch-id: 94ac03d518993921bcfc9cc9f58d7da0c3528b51
prerequisite-patch-id: 694f7400375f5b85581fc1821e427334507826f2
prerequisite-patch-id: 699d49c4439dadb4b7cf900857f027d050cd6093
prerequisite-patch-id: 40d773f5a19912f731ee5fd4739ed2e3c2157b07
prerequisite-patch-id: 2bc3fd6df5dda116efe882045863d6c88aa81b3a
prerequisite-patch-id: 735e62255c75801bdc4c0b4107850bce821ff7f5
prerequisite-patch-id: b2a923b922e661fa6085185f33c1f1e733db9110
prerequisite-patch-id: b2bbc28354075432f059344eba5a127a653475cf
prerequisite-patch-id: 70eab7b7eee728afcd90e40f6743d1356f6d81ab
prerequisite-patch-id: 6276b2a23818c65ff2ad3d65b562615690cffee9

Comments

Hal Feng Nov. 18, 2022, 7:17 a.m. UTC | #1 
On Fri, 18 Nov 2022 09:11:03 +0800, Hal Feng wrote:
> The original patch series "Basic StarFive JH7110 RISC-V SoC support" [1]
> is split into 3 patch series. They respectively add basic clock&reset,
> pinctrl and device tree support for StarFive JH7110 SoC. These patch
> series are independent, but the Visionfive2 board can boot up successfully

Note that this patch series depends on the patch series [1].

[1] https://lore.kernel.org/all/20221118010627.70576-1-hal.feng@starfivetech.com/

> only if all these patches series applied. This one adds basic pinctrl