mbox series

[v2,0/1] riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function

Message ID 20241119031232.50726-1-e@freeshell.de (mailing list archive)
Headers show
Series riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function | expand

Message

E Shattow Nov. 19, 2024, 3:12 a.m. UTC 
Enable host mode JH7110 on-chip USB for Pine64 Star64 by setting host mode
and connect vbus pinctrl.

This functionality depends on setting the USB over-current register to disable at bootloader phase, for example U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20241012031328.4268-6-minda.chen@starfivetech.com/

If the over-current register is not prepared for us then the result is no
change in functional outcome with this patch applied; there is an error
visible to the user and this usb configuration fails (same as it is now).

Changes since v1:
 - Rebase on linux-next/master
 - use tabs for code indent

E Shattow (1):
  riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function

 .../boot/dts/starfive/jh7110-pine64-star64.dts | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)