diff mbox series

[v2,13/17] riscv: dts: microchip: use hart and clk defines for icicle kit

Message ID 20211217093325.30612-14-conor.dooley@microchip.com (mailing list archive)
State New, archived
Headers show
Series Update the Icicle Kit device tree | expand

Commit Message

Conor Dooley Dec. 17, 2021, 9:33 a.m. UTC 
From: Conor Dooley <conor.dooley@microchip.com>

Update the Microchip Icicle kit device tree by replacing interrupt and
clock related magic numbers with their defined counterparts.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../microchip/microchip-mpfs-icicle-kit.dts   |  2 +-
 .../boot/dts/microchip/microchip-mpfs.dtsi    | 55 +++++++++++--------
 2 files changed, 34 insertions(+), 23 deletions(-)

Comments

Geert Uytterhoeven Dec. 17, 2021, 1:40 p.m. UTC | #1 
Hi Conor,

Thanks for your patch!

On Fri, Dec 17, 2021 at 10:33 AM <conor.dooley@microchip.com> wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> Update the Microchip Icicle kit device tree by replacing interrupt and
> clock related magic numbers with their defined counterparts.

Usually we make a distinction between (a) numbers that can be looked
up easily in a datasheet, and (b) numbers that were made up because
we needed some mapping. Of course both types of numbers are fixed,
and cannot be changed.

For (a), we tend to use the hardcoded numbers in the DTS files, to
avoid reviewers having to go through another layer of indirection
(i.e. does the number for the define match the number in the
datasheet?).
For (b), we use the defines, as there is no other official place to
look up the numbers.

> --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
> @@ -2,6 +2,8 @@
>  /* Copyright (c) 2020 Microchip Technology Inc */
>
>  /dts-v1/;
> +#include "dt-bindings/clock/microchip,mpfs-clock.h"

The clock numbers we're made-up, so they fall under (b).

> +#include "dt-bindings/interrupt-controller/riscv-hart.h"

I believe these are just the official CLIC interrupt IDs, so they
fall under (a)?

> @@ -165,11 +167,16 @@ cache-controller@2010000 {
>                 clint@2000000 {
>                         compatible = "sifive,fu540-c000-clint", "sifive,clint0";
>                         reg = <0x0 0x2000000 0x0 0xC000>;
> -                       interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> -                                             <&cpu1_intc 3>, <&cpu1_intc 7>,
> -                                             <&cpu2_intc 3>, <&cpu2_intc 7>,
> -                                             <&cpu3_intc 3>, <&cpu3_intc 7>,
> -                                             <&cpu4_intc 3>, <&cpu4_intc 7>;
> +                       interrupts-extended = <&cpu0_intc HART_INT_M_SOFT>,
> +                                             <&cpu0_intc HART_INT_M_TIMER>,
> +                                             <&cpu1_intc HART_INT_M_SOFT>,
> +                                             <&cpu1_intc HART_INT_M_TIMER>,
> +                                             <&cpu2_intc HART_INT_M_SOFT>,
> +                                             <&cpu2_intc HART_INT_M_TIMER>,
> +                                             <&cpu3_intc HART_INT_M_SOFT>,
> +                                             <&cpu3_intc HART_INT_M_TIMER>,
> +                                             <&cpu4_intc HART_INT_M_SOFT>,
> +                                             <&cpu4_intc HART_INT_M_TIMER>;

Hence I'm not sure we want changes like this?

>                 };
>
>                 plic: interrupt-controller@c000000 {
         };
>
> @@ -210,7 +221,7 @@ serial0: serial@20000000 {
>                         interrupt-parent = <&plic>;
>                         interrupts = <90>;
>                         current-speed = <115200>;
> -                       clocks = <&clkcfg 8>;
> +                       clocks = <&clkcfg CLK_MMUART0>;

But this change is fine.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
index 0c748ae1b006..6d19ba196f12 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
@@ -31,7 +31,7 @@  cpus {
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>;
-		clocks = <&clkcfg 26>;
+		clocks = <&clkcfg CLK_DDRC>;
 	};
 };
 
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index 869aaf0d5c06..ce9151edd1b6 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -2,6 +2,8 @@ 
 /* Copyright (c) 2020 Microchip Technology Inc */
 
 /dts-v1/;
+#include "dt-bindings/clock/microchip,mpfs-clock.h"
+#include "dt-bindings/interrupt-controller/riscv-hart.h"
 
 / {
 	#address-cells = <2>;
@@ -14,7 +16,6 @@  cpus {
 		#size-cells = <0>;
 
 		cpu@0 {
-			clock-frequency = <0>;
 			compatible = "sifive,e51", "sifive,rocket0", "riscv";
 			device_type = "cpu";
 			i-cache-block-size = <64>;
@@ -22,6 +23,7 @@  cpu@0 {
 			i-cache-size = <16384>;
 			reg = <0>;
 			riscv,isa = "rv64imac";
+			clocks = <&clkcfg CLK_CPU>;
 			status = "disabled";
 
 			cpu0_intc: interrupt-controller {
@@ -32,7 +34,6 @@  cpu0_intc: interrupt-controller {
 		};
 
 		cpu@1 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;
@@ -48,6 +49,7 @@  cpu@1 {
 			mmu-type = "riscv,sv39";
 			reg = <1>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 
@@ -59,7 +61,6 @@  cpu1_intc: interrupt-controller {
 		};
 
 		cpu@2 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;
@@ -75,6 +76,7 @@  cpu@2 {
 			mmu-type = "riscv,sv39";
 			reg = <2>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 
@@ -86,7 +88,6 @@  cpu2_intc: interrupt-controller {
 		};
 
 		cpu@3 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;
@@ -102,6 +103,7 @@  cpu@3 {
 			mmu-type = "riscv,sv39";
 			reg = <3>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 
@@ -113,7 +115,6 @@  cpu3_intc: interrupt-controller {
 		};
 
 		cpu@4 {
-			clock-frequency = <0>;
 			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
 			d-cache-block-size = <64>;
 			d-cache-sets = <64>;
@@ -129,6 +130,7 @@  cpu@4 {
 			mmu-type = "riscv,sv39";
 			reg = <4>;
 			riscv,isa = "rv64imafdc";
+			clocks = <&clkcfg CLK_CPU>;
 			tlb-split;
 			status = "okay";
 			cpu4_intc: interrupt-controller {
@@ -165,11 +167,16 @@  cache-controller@2010000 {
 		clint@2000000 {
 			compatible = "sifive,fu540-c000-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0xC000>;
-			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
-					      <&cpu1_intc 3>, <&cpu1_intc 7>,
-					      <&cpu2_intc 3>, <&cpu2_intc 7>,
-					      <&cpu3_intc 3>, <&cpu3_intc 7>,
-					      <&cpu4_intc 3>, <&cpu4_intc 7>;
+			interrupts-extended = <&cpu0_intc HART_INT_M_SOFT>,
+					      <&cpu0_intc HART_INT_M_TIMER>,
+					      <&cpu1_intc HART_INT_M_SOFT>,
+					      <&cpu1_intc HART_INT_M_TIMER>,
+					      <&cpu2_intc HART_INT_M_SOFT>,
+					      <&cpu2_intc HART_INT_M_TIMER>,
+					      <&cpu3_intc HART_INT_M_SOFT>,
+					      <&cpu3_intc HART_INT_M_TIMER>,
+					      <&cpu4_intc HART_INT_M_SOFT>,
+					      <&cpu4_intc HART_INT_M_TIMER>;
 		};
 
 		plic: interrupt-controller@c000000 {
@@ -178,11 +185,15 @@  plic: interrupt-controller@c000000 {
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11>,
-					      <&cpu1_intc 11>, <&cpu1_intc 9>,
-					      <&cpu2_intc 11>, <&cpu2_intc 9>,
-					      <&cpu3_intc 11>, <&cpu3_intc 9>,
-					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			interrupts-extended = <&cpu0_intc HART_INT_M_EXT>,
+					      <&cpu1_intc HART_INT_M_EXT>,
+					      <&cpu1_intc HART_INT_S_EXT>,
+					      <&cpu2_intc HART_INT_M_EXT>,
+					      <&cpu2_intc HART_INT_S_EXT>,
+					      <&cpu3_intc HART_INT_M_EXT>,
+					      <&cpu3_intc HART_INT_S_EXT>,
+					      <&cpu4_intc HART_INT_M_EXT>,
+					      <&cpu4_intc HART_INT_S_EXT>;
 			riscv,ndev = <186>;
 		};
 
@@ -210,7 +221,7 @@  serial0: serial@20000000 {
 			interrupt-parent = <&plic>;
 			interrupts = <90>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 8>;
+			clocks = <&clkcfg CLK_MMUART0>;
 			status = "disabled";
 		};
 
@@ -222,7 +233,7 @@  serial1: serial@20100000 {
 			interrupt-parent = <&plic>;
 			interrupts = <91>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 9>;
+			clocks = <&clkcfg CLK_MMUART1>;
 			status = "disabled";
 		};
 
@@ -234,7 +245,7 @@  serial2: serial@20102000 {
 			interrupt-parent = <&plic>;
 			interrupts = <92>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 10>;
+			clocks = <&clkcfg CLK_MMUART2>;
 			status = "disabled";
 		};
 
@@ -246,7 +257,7 @@  serial3: serial@20104000 {
 			interrupt-parent = <&plic>;
 			interrupts = <93>;
 			current-speed = <115200>;
-			clocks = <&clkcfg 11>;
+			clocks = <&clkcfg CLK_MMUART3>;
 			status = "disabled";
 		};
 
@@ -256,7 +267,7 @@  mmc: mmc@20008000 {
 			reg = <0x0 0x20008000 0x0 0x1000>;
 			interrupt-parent = <&plic>;
 			interrupts = <88>, <89>;
-			clocks = <&clkcfg 6>;
+			clocks = <&clkcfg CLK_MMC>;
 			max-frequency = <200000000>;
 			status = "disabled";
 		};
@@ -267,7 +278,7 @@  emac0: ethernet@20110000 {
 			interrupt-parent = <&plic>;
 			interrupts = <64>, <65>, <66>, <67>;
 			local-mac-address = [00 00 00 00 00 00];
-			clocks = <&clkcfg 4>, <&clkcfg 2>;
+			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 			#address-cells = <1>;
@@ -280,7 +291,7 @@  emac1: ethernet@20112000 {
 			interrupt-parent = <&plic>;
 			interrupts = <70>, <71>, <72>, <73>;
 			local-mac-address = [00 00 00 00 00 00];
-			clocks = <&clkcfg 5>, <&clkcfg 2>;
+			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
 			status = "disabled";
 			clock-names = "pclk", "hclk";
 			#address-cells = <1>;