diff mbox series

PCI: fu740: RFC: force gen1 and get devices probing

Message ID 20220204183316.328937-1-ben.dooks@codethink.co.uk (mailing list archive)
State New, archived
Headers show
Series PCI: fu740: RFC: force gen1 and get devices probing | expand

Commit Message

Ben Dooks Feb. 4, 2022, 6:33 p.m. UTC
The dw pcie core does not probe devices unless this fix
from u-boot is applied. The link must be changed to gen1
and then the system will see all the other pcie devices
behind the unmatched board's bridge.

This is a quick PoC to try and get our test farm working
when a system does not have the pcie initialised by a
u-boot script.

I will look at a proper patch when I am back in the office
---
 drivers/pci/controller/dwc/pcie-fu740.c | 37 +++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

Comments

David Abdurachmanov Feb. 4, 2022, 7:12 p.m. UTC | #1
On Fri, Feb 4, 2022 at 8:35 PM Ben Dooks <ben.dooks@codethink.co.uk> wrote:
>
> The dw pcie core does not probe devices unless this fix
> from u-boot is applied. The link must be changed to gen1
> and then the system will see all the other pcie devices
> behind the unmatched board's bridge.
>
> This is a quick PoC to try and get our test farm working
> when a system does not have the pcie initialised by a
> u-boot script.
>
> I will look at a proper patch when I am back in the office

Hi,

Have you looked into the patches posted for Linux and U-Boot from
Maciej W. Rozycki?

On the Linux side (not reviewed yet):
[PATCH v3] pci: Work around ASMedia ASM2824 PCIe link training failures
https://www.spinics.net/lists/linux-pci/msg120112.html

The U-Boot fix was merged a few days ago.

david

> ---
>  drivers/pci/controller/dwc/pcie-fu740.c | 37 +++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
> index 960e58ead5f2..44f792764e45 100644
> --- a/drivers/pci/controller/dwc/pcie-fu740.c
> +++ b/drivers/pci/controller/dwc/pcie-fu740.c
> @@ -181,11 +181,48 @@ static void fu740_pcie_init_phy(struct fu740_pcie *afp)
>         fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
>  }
>
> +/* u-boot forces system to gen1 otherwise nothing probes... */
> +static void pcie_sifive_force_gen1(struct dw_pcie *dw, struct fu740_pcie *afp )
> +{
> +       unsigned val;
> +
> +#if 0
> +       /* u-boot code */
> +        /* ctrl_ro_wr_enable */
> +        val = readl(sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
> +        val |= DBI_RO_WR_EN;
> +        writel(val, sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
> +
> +        /* configure link cap */
> +        linkcap = readl(sv->dw.dbi_base + PF0_PCIE_CAP_LINK_CAP);
> +        linkcap |= PCIE_LINK_CAP_MAX_SPEED_MASK;
> +        writel(linkcap, sv->dw.dbi_base + PF0_PCIE_CAP_LINK_CAP);
> +
> +        /* ctrl_ro_wr_disable */
> +        val &= ~DBI_RO_WR_EN;
> +        writel(val, sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
> +#endif
> +
> +       val = readl_relaxed(dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
> +       val |= PCIE_DBI_RO_WR_EN;
> +       writel_relaxed(val, dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
> +
> +       val = readl(dw->dbi_base + 0x70 + 0x0c);
> +       val |= 0xf;
> +       writel(val, dw->dbi_base + 0x70 + 0x0c);
> +
> +       val = readl_relaxed(dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
> +       val &= ~PCIE_DBI_RO_WR_EN;
> +       writel_relaxed(val, dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
> +}
> +
>  static int fu740_pcie_start_link(struct dw_pcie *pci)
>  {
>         struct device *dev = pci->dev;
>         struct fu740_pcie *afp = dev_get_drvdata(dev);
>
> +       pcie_sifive_force_gen1(pci, afp);
> +
>         /* Enable LTSSM */
>         writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
>         return 0;
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Ben Dooks Feb. 5, 2022, 8:59 a.m. UTC | #2
On 2022-02-04 19:12, David Abdurachmanov wrote:
> On Fri, Feb 4, 2022 at 8:35 PM Ben Dooks <ben.dooks@codethink.co.uk> 
> wrote:
>> 
>> The dw pcie core does not probe devices unless this fix
>> from u-boot is applied. The link must be changed to gen1
>> and then the system will see all the other pcie devices
>> behind the unmatched board's bridge.
>> 
>> This is a quick PoC to try and get our test farm working
>> when a system does not have the pcie initialised by a
>> u-boot script.
>> 
>> I will look at a proper patch when I am back in the office
> 
> Hi,
> 
> Have you looked into the patches posted for Linux and U-Boot from
> Maciej W. Rozycki?

I haven't seen any u-boot patches, but I do know u-boot has been
able to do this since 2021.08 release as a colleague has apparently
know about needing to initialise PCIe under u-boot to get Linux to
properly enumerate devices.

Do you have a reference to these, trivial google searches did not
show any patches.

> On the Linux side (not reviewed yet):
> [PATCH v3] pci: Work around ASMedia ASM2824 PCIe link training failures
> https://www.spinics.net/lists/linux-pci/msg120112.html

This is not the issue, we do not see even the ASMedia PCIe bridge
if u-boot does not have PCIe initialisation done.

> The U-Boot fix was merged a few days ago.

Ok, but I think the kernel should also have this fix done as it
seems bad to have to upgrade u-boot on all the machines for
something that is not a large fix.

> david
> 
>> ---
>>  drivers/pci/controller/dwc/pcie-fu740.c | 37 
>> +++++++++++++++++++++++++
>>  1 file changed, 37 insertions(+)
>> 
>> diff --git a/drivers/pci/controller/dwc/pcie-fu740.c 
>> b/drivers/pci/controller/dwc/pcie-fu740.c
>> index 960e58ead5f2..44f792764e45 100644
>> --- a/drivers/pci/controller/dwc/pcie-fu740.c
>> +++ b/drivers/pci/controller/dwc/pcie-fu740.c
>> @@ -181,11 +181,48 @@ static void fu740_pcie_init_phy(struct 
>> fu740_pcie *afp)
>>         fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, 
>> PCIEX8MGMT_PHY_INIT_VAL, afp);
>>  }
>> 
>> +/* u-boot forces system to gen1 otherwise nothing probes... */
>> +static void pcie_sifive_force_gen1(struct dw_pcie *dw, struct 
>> fu740_pcie *afp )
>> +{
>> +       unsigned val;
>> +
>> +#if 0
>> +       /* u-boot code */
>> +        /* ctrl_ro_wr_enable */
>> +        val = readl(sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
>> +        val |= DBI_RO_WR_EN;
>> +        writel(val, sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
>> +
>> +        /* configure link cap */
>> +        linkcap = readl(sv->dw.dbi_base + PF0_PCIE_CAP_LINK_CAP);
>> +        linkcap |= PCIE_LINK_CAP_MAX_SPEED_MASK;
>> +        writel(linkcap, sv->dw.dbi_base + PF0_PCIE_CAP_LINK_CAP);
>> +
>> +        /* ctrl_ro_wr_disable */
>> +        val &= ~DBI_RO_WR_EN;
>> +        writel(val, sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
>> +#endif
>> +
>> +       val = readl_relaxed(dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
>> +       val |= PCIE_DBI_RO_WR_EN;
>> +       writel_relaxed(val, dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);

I've found pre-made functions for these.

>> +
>> +       val = readl(dw->dbi_base + 0x70 + 0x0c);
>> +       val |= 0xf;
>> +       writel(val, dw->dbi_base + 0x70 + 0x0c);

Will fix to config-register 0x0c and try and find the relevant macros
for this and the proper accessor macros for the dw driver.

>> +
>> +       val = readl_relaxed(dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
>> +       val &= ~PCIE_DBI_RO_WR_EN;
>> +       writel_relaxed(val, dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
>> +}
>> +
>>  static int fu740_pcie_start_link(struct dw_pcie *pci)
>>  {
>>         struct device *dev = pci->dev;
>>         struct fu740_pcie *afp = dev_get_drvdata(dev);
>> 
>> +       pcie_sifive_force_gen1(pci, afp);

I'll change this to fu740_pcie_force_gen1()

>> +
>>         /* Enable LTSSM */
>>         writel_relaxed(0x1, afp->mgmt_base + 
>> PCIEX8MGMT_APP_LTSSM_ENABLE);
>>         return 0;
>> --
>> 2.34.1
>> 
>> 
>> _______________________________________________
>> linux-riscv mailing list
>> linux-riscv@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
index 960e58ead5f2..44f792764e45 100644
--- a/drivers/pci/controller/dwc/pcie-fu740.c
+++ b/drivers/pci/controller/dwc/pcie-fu740.c
@@ -181,11 +181,48 @@  static void fu740_pcie_init_phy(struct fu740_pcie *afp)
 	fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp);
 }
 
+/* u-boot forces system to gen1 otherwise nothing probes... */
+static void pcie_sifive_force_gen1(struct dw_pcie *dw, struct fu740_pcie *afp )
+{
+	unsigned val;
+
+#if 0
+	/* u-boot code */
+        /* ctrl_ro_wr_enable */
+        val = readl(sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
+        val |= DBI_RO_WR_EN;
+        writel(val, sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
+
+        /* configure link cap */
+        linkcap = readl(sv->dw.dbi_base + PF0_PCIE_CAP_LINK_CAP);
+        linkcap |= PCIE_LINK_CAP_MAX_SPEED_MASK;
+        writel(linkcap, sv->dw.dbi_base + PF0_PCIE_CAP_LINK_CAP);
+
+        /* ctrl_ro_wr_disable */
+        val &= ~DBI_RO_WR_EN;
+        writel(val, sv->dw.dbi_base + PCIE_MISC_CONTROL_1);
+#endif
+
+	val = readl_relaxed(dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
+	val |= PCIE_DBI_RO_WR_EN;
+	writel_relaxed(val, dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
+
+	val = readl(dw->dbi_base + 0x70 + 0x0c);
+	val |= 0xf;
+	writel(val, dw->dbi_base + 0x70 + 0x0c);
+
+	val = readl_relaxed(dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
+	val &= ~PCIE_DBI_RO_WR_EN;
+	writel_relaxed(val, dw->dbi_base +  PCIE_MISC_CONTROL_1_OFF);
+}
+
 static int fu740_pcie_start_link(struct dw_pcie *pci)
 {
 	struct device *dev = pci->dev;
 	struct fu740_pcie *afp = dev_get_drvdata(dev);
 
+	pcie_sifive_force_gen1(pci, afp);
+
 	/* Enable LTSSM */
 	writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
 	return 0;