diff mbox series

riscv: dts: canaan: Fix SPI3 bus width

Message ID 20220308131642.95374-1-Niklas.Cassel@wdc.com (mailing list archive)
State New, archived
Headers show
Series riscv: dts: canaan: Fix SPI3 bus width | expand

Commit Message

Niklas Cassel March 8, 2022, 1:16 p.m. UTC 
From: Niklas Cassel <niklas.cassel@wdc.com>

According to the K210 Standalone SDK Programming guide:
https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf

Section 15.4.3.3:
SPI0 and SPI1 supports: standard, dual, quad and octal transfers.
SPI3 supports: standard, dual and quad transfers (octal is not supported).

In order to support quad transfers (Quad SPI), SPI3 must have four IO wires
connected to the SPI flash.

Update the device tree to specify the correct bus width.

Tested on maix bit, maix dock and maixduino, which all have the same
SPI flash (gd25lq128d) connected to SPI3. maix go is untested, but it
would not make sense for this k210 board to be designed differently.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
---
 arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts  | 2 ++
 arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts | 2 ++
 arch/riscv/boot/dts/canaan/sipeed_maix_go.dts   | 2 ++
 arch/riscv/boot/dts/canaan/sipeed_maixduino.dts | 2 ++
 4 files changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts
index 984872f3d3a9..ff71ec35f4e4 100644
--- a/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts
+++ b/arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts
@@ -204,6 +204,8 @@  flash@0 {
 		reg = <0>;
 		spi-max-frequency = <50000000>;
 		m25p,fast-read;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		broken-flash-reset;
 	};
 };
diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts
index 7ba99b4da304..8d23401b0bbb 100644
--- a/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts
+++ b/arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts
@@ -205,6 +205,8 @@  flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		broken-flash-reset;
 	};
diff --git a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
index be9b12c9b374..24fd83b43d9d 100644
--- a/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
+++ b/arch/riscv/boot/dts/canaan/sipeed_maix_go.dts
@@ -213,6 +213,8 @@  flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		broken-flash-reset;
 	};
diff --git a/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
index 031c0c28f819..25341f38292a 100644
--- a/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
+++ b/arch/riscv/boot/dts/canaan/sipeed_maixduino.dts
@@ -178,6 +178,8 @@  flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		broken-flash-reset;
 	};