diff mbox series

[v2] riscv: mm: init: make pt_ops_set_[early|late|fixmap] static

Message ID 20220516143204.2603-1-jszhang@kernel.org (mailing list archive)
State New, archived
Headers show
Series [v2] riscv: mm: init: make pt_ops_set_[early|late|fixmap] static | expand

Commit Message

Jisheng Zhang May 16, 2022, 2:32 p.m. UTC
These three functions are only used in init.c, so make them static.
Fix W=1 warnings like below:

arch/riscv/mm/init.c:721:13: warning: no previous prototype for function
'pt_ops_set_early' [-Wmissing-prototypes]
   void __init pt_ops_set_early(void)
               ^

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
---

since v1:
 - collect Reviewed-by tag
 - move out from the static key series as a separate patch

 arch/riscv/mm/init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Atish Patra May 22, 2022, 8:21 a.m. UTC | #1
On Mon, May 16, 2022 at 7:41 AM Jisheng Zhang <jszhang@kernel.org> wrote:
>
> These three functions are only used in init.c, so make them static.
> Fix W=1 warnings like below:
>
> arch/riscv/mm/init.c:721:13: warning: no previous prototype for function
> 'pt_ops_set_early' [-Wmissing-prototypes]
>    void __init pt_ops_set_early(void)
>                ^
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> ---
>
> since v1:
>  - collect Reviewed-by tag
>  - move out from the static key series as a separate patch
>
>  arch/riscv/mm/init.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 05ed641a1134..5f3f26dd9f21 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -849,7 +849,7 @@ static void __init create_fdt_early_page_table(pgd_t *pgdir, uintptr_t dtb_pa)
>   * MMU is not enabled, the page tables are allocated directly using
>   * early_pmd/pud/p4d and the address returned is the physical one.
>   */
> -void __init pt_ops_set_early(void)
> +static void __init pt_ops_set_early(void)
>  {
>         pt_ops.alloc_pte = alloc_pte_early;
>         pt_ops.get_pte_virt = get_pte_virt_early;
> @@ -871,7 +871,7 @@ void __init pt_ops_set_early(void)
>   * Note that this is called with MMU disabled, hence kernel_mapping_pa_to_va,
>   * but it will be used as described above.
>   */
> -void __init pt_ops_set_fixmap(void)
> +static void __init pt_ops_set_fixmap(void)
>  {
>         pt_ops.alloc_pte = kernel_mapping_pa_to_va((uintptr_t)alloc_pte_fixmap);
>         pt_ops.get_pte_virt = kernel_mapping_pa_to_va((uintptr_t)get_pte_virt_fixmap);
> @@ -889,7 +889,7 @@ void __init pt_ops_set_fixmap(void)
>   * MMU is enabled and page table setup is complete, so from now, we can use
>   * generic page allocation functions to setup page table.
>   */
> -void __init pt_ops_set_late(void)
> +static void __init pt_ops_set_late(void)
>  {
>         pt_ops.alloc_pte = alloc_pte_late;
>         pt_ops.get_pte_virt = get_pte_virt_late;
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv


Reviewed-by: Atish Patra <atishp@rivosinc.com>
Palmer Dabbelt June 3, 2022, 1:34 a.m. UTC | #2
On Mon, 16 May 2022 07:32:04 PDT (-0700), jszhang@kernel.org wrote:
> These three functions are only used in init.c, so make them static.
> Fix W=1 warnings like below:
>
> arch/riscv/mm/init.c:721:13: warning: no previous prototype for function
> 'pt_ops_set_early' [-Wmissing-prototypes]
>    void __init pt_ops_set_early(void)
>                ^
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> ---
>
> since v1:
>  - collect Reviewed-by tag
>  - move out from the static key series as a separate patch
>
>  arch/riscv/mm/init.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 05ed641a1134..5f3f26dd9f21 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -849,7 +849,7 @@ static void __init create_fdt_early_page_table(pgd_t *pgdir, uintptr_t dtb_pa)
>   * MMU is not enabled, the page tables are allocated directly using
>   * early_pmd/pud/p4d and the address returned is the physical one.
>   */
> -void __init pt_ops_set_early(void)
> +static void __init pt_ops_set_early(void)
>  {
>  	pt_ops.alloc_pte = alloc_pte_early;
>  	pt_ops.get_pte_virt = get_pte_virt_early;
> @@ -871,7 +871,7 @@ void __init pt_ops_set_early(void)
>   * Note that this is called with MMU disabled, hence kernel_mapping_pa_to_va,
>   * but it will be used as described above.
>   */
> -void __init pt_ops_set_fixmap(void)
> +static void __init pt_ops_set_fixmap(void)
>  {
>  	pt_ops.alloc_pte = kernel_mapping_pa_to_va((uintptr_t)alloc_pte_fixmap);
>  	pt_ops.get_pte_virt = kernel_mapping_pa_to_va((uintptr_t)get_pte_virt_fixmap);
> @@ -889,7 +889,7 @@ void __init pt_ops_set_fixmap(void)
>   * MMU is enabled and page table setup is complete, so from now, we can use
>   * generic page allocation functions to setup page table.
>   */
> -void __init pt_ops_set_late(void)
> +static void __init pt_ops_set_late(void)
>  {
>  	pt_ops.alloc_pte = alloc_pte_late;
>  	pt_ops.get_pte_virt = get_pte_virt_late;

Thanks, this is on for-next.
diff mbox series

Patch

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 05ed641a1134..5f3f26dd9f21 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -849,7 +849,7 @@  static void __init create_fdt_early_page_table(pgd_t *pgdir, uintptr_t dtb_pa)
  * MMU is not enabled, the page tables are allocated directly using
  * early_pmd/pud/p4d and the address returned is the physical one.
  */
-void __init pt_ops_set_early(void)
+static void __init pt_ops_set_early(void)
 {
 	pt_ops.alloc_pte = alloc_pte_early;
 	pt_ops.get_pte_virt = get_pte_virt_early;
@@ -871,7 +871,7 @@  void __init pt_ops_set_early(void)
  * Note that this is called with MMU disabled, hence kernel_mapping_pa_to_va,
  * but it will be used as described above.
  */
-void __init pt_ops_set_fixmap(void)
+static void __init pt_ops_set_fixmap(void)
 {
 	pt_ops.alloc_pte = kernel_mapping_pa_to_va((uintptr_t)alloc_pte_fixmap);
 	pt_ops.get_pte_virt = kernel_mapping_pa_to_va((uintptr_t)get_pte_virt_fixmap);
@@ -889,7 +889,7 @@  void __init pt_ops_set_fixmap(void)
  * MMU is enabled and page table setup is complete, so from now, we can use
  * generic page allocation functions to setup page table.
  */
-void __init pt_ops_set_late(void)
+static void __init pt_ops_set_late(void)
 {
 	pt_ops.alloc_pte = alloc_pte_late;
 	pt_ops.get_pte_virt = get_pte_virt_late;