diff mbox series

[v5,3/6] arm64: dts: allwinner: a100: Add device node for DMA controller

Message ID 20220826050942.20067-4-samuel@sholland.org (mailing list archive)
State New, archived
Headers show
Series leds: Allwinner A100 LED controller support | expand

Commit Message

Samuel Holland Aug. 26, 2022, 5:09 a.m. UTC 
From: Yangtao Li <frank@allwinnertech.com>

The A100 SoC has a DMA controller that supports 8 DMA channels
to and from various peripherals.

Add a device node for it.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

Changes in v5:
 - New patch for v5, needed since the LEDC binding requires DMA
 - From previous submission: fixed off-by-one in dma-requests property

 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index 548539c93ab0..5453a3bb7d81 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -101,6 +101,18 @@  ccu: clock@3001000 {
 			#reset-cells = <1>;
 		};
 
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			resets = <&ccu RST_BUS_DMA>;
+			dma-channels = <8>;
+			dma-requests = <52>;
+			#dma-cells = <1>;
+		};
+
 		gic: interrupt-controller@3021000 {
 			compatible = "arm,gic-400";
 			reg = <0x03021000 0x1000>, <0x03022000 0x2000>,