| Message ID | 20221118010627.70576-9-hal.feng@starfivetech.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Conor Dooley |
| Headers | show |
| Series | Basic clock and reset support for StarFive JH7110 RISC-V SoC | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/patch_count | success | Link |
| conchuod/cover_letter | success | Series has a cover letter |
| conchuod/tree_selection | success | Guessed tree name to be for-next |
| conchuod/fixes_present | success | Fixes tag not required for -next series |
| conchuod/verify_signedoff | success | Signed-off-by tag matches author and committer |
| conchuod/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| conchuod/module_param | success | Was 0 now: 0 |
| conchuod/build_rv32_defconfig | success | Build OK |
| conchuod/build_warn_rv64 | success | Errors and warnings before: 0 this patch: 0 |
| conchuod/dtb_warn_rv64 | success | Errors and warnings before: 0 this patch: 0 |
| conchuod/header_inline | success | No static functions without inline keyword in header files |
| conchuod/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 169 lines checked |
| conchuod/source_inline | success | Was 0 now: 0 |
| conchuod/build_rv64_nommu_k210_defconfig | success | Build OK |
| conchuod/verify_fixes | success | No Fixes tag |
| conchuod/build_rv64_nommu_virt_defconfig | success | Build OK |
On Fri, 18 Nov 2022 at 02:06, Hal Feng <hal.feng@starfivetech.com> wrote: > > From: Emil Renner Berthing <kernel@esmil.dk> > > Add resets for the StarFive JH7110 system (SYS) and always-on (AON) > reset controller. > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > --- > MAINTAINERS | 5 +- > include/dt-bindings/reset/starfive-jh7110.h | 154 ++++++++++++++++++++ > 2 files changed, 157 insertions(+), 2 deletions(-) > create mode 100644 include/dt-bindings/reset/starfive-jh7110.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index e97dac9c0ee4..eeab26f5597c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -19614,12 +19614,13 @@ F: Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml > F: drivers/pinctrl/starfive/ > F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h > > -STARFIVE JH7100 RESET CONTROLLER DRIVERS > +STARFIVE RESET CONTROLLER DRIVERS > M: Emil Renner Berthing <kernel@esmil.dk> > +M: Hal Feng <hal.feng@starfivetech.com> > S: Maintained > F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml > F: drivers/reset/starfive/ > -F: include/dt-bindings/reset/starfive-jh7100.h > +F: include/dt-bindings/reset/starfive* > > STATIC BRANCH/CALL > M: Peter Zijlstra <peterz@infradead.org> > diff --git a/include/dt-bindings/reset/starfive-jh7110.h b/include/dt-bindings/reset/starfive-jh7110.h > new file mode 100644 > index 000000000000..1a5bab671161 > --- /dev/null > +++ b/include/dt-bindings/reset/starfive-jh7110.h > @@ -0,0 +1,154 @@ > +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ > +/* > + * Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk> I'm not sure how this ended up here, but I definitely didn't start working on this before 2022. > + */ > + > +#ifndef __DT_BINDINGS_RESET_STARFIVE_JH7110_H__ > +#define __DT_BINDINGS_RESET_STARFIVE_JH7110_H__ > + > +/* SYSCRG resets */ > +#define JH7110_SYSRST_JTAG2APB 0 > +#define JH7110_SYSRST_SYSCON 1 > +#define JH7110_SYSRST_IOMUX 2 > +#define JH7110_SYSRST_BUS 3 > +#define JH7110_SYSRST_DEBUG 4 > +#define JH7110_SYSRST_CORE0 5 > +#define JH7110_SYSRST_CORE1 6 > +#define JH7110_SYSRST_CORE2 7 > +#define JH7110_SYSRST_CORE3 8 > +#define JH7110_SYSRST_CORE4 9 > +#define JH7110_SYSRST_CORE0_ST 10 > +#define JH7110_SYSRST_CORE1_ST 11 > +#define JH7110_SYSRST_CORE2_ST 12 > +#define JH7110_SYSRST_CORE3_ST 13 > +#define JH7110_SYSRST_CORE4_ST 14 > +#define JH7110_SYSRST_TRACE0 15 > +#define JH7110_SYSRST_TRACE1 16 > +#define JH7110_SYSRST_TRACE2 17 > +#define JH7110_SYSRST_TRACE3 18 > +#define JH7110_SYSRST_TRACE4 19 > +#define JH7110_SYSRST_TRACE_COM 20 > +#define JH7110_SYSRST_GPU_APB 21 > +#define JH7110_SYSRST_GPU_DOMA 22 > +#define JH7110_SYSRST_NOC_BUS_APB_BUS 23 > +#define JH7110_SYSRST_NOC_BUS_AXICFG0_AXI 24 > +#define JH7110_SYSRST_NOC_BUS_CPU_AXI 25 > +#define JH7110_SYSRST_NOC_BUS_DISP_AXI 26 > +#define JH7110_SYSRST_NOC_BUS_GPU_AXI 27 > +#define JH7110_SYSRST_NOC_BUS_ISP_AXI 28 > +#define JH7110_SYSRST_NOC_BUS_DDRC 29 > +#define JH7110_SYSRST_NOC_BUS_STG_AXI 30 > +#define JH7110_SYSRST_NOC_BUS_VDEC_AXI 31 > + > +#define JH7110_SYSRST_NOC_BUS_VENC_AXI 32 > +#define JH7110_SYSRST_AXI_CFG1_DEC_AHB 33 > +#define JH7110_SYSRST_AXI_CFG1_DEC_MAIN 34 > +#define JH7110_SYSRST_AXI_CFG0_DEC_MAIN 35 > +#define JH7110_SYSRST_AXI_CFG0_DEC_MAIN_DIV 36 > +#define JH7110_SYSRST_AXI_CFG0_DEC_HIFI4 37 > +#define JH7110_SYSRST_DDR_AXI 38 > +#define JH7110_SYSRST_DDR_OSC 39 > +#define JH7110_SYSRST_DDR_APB 40 > +#define JH7110_SYSRST_DOM_ISP_TOP_N 41 > +#define JH7110_SYSRST_DOM_ISP_TOP_AXI 42 > +#define JH7110_SYSRST_DOM_VOUT_TOP_SRC 43 > +#define JH7110_SYSRST_CODAJ12_AXI 44 > +#define JH7110_SYSRST_CODAJ12_CORE 45 > +#define JH7110_SYSRST_CODAJ12_APB 46 > +#define JH7110_SYSRST_WAVE511_AXI 47 > +#define JH7110_SYSRST_WAVE511_BPU 48 > +#define JH7110_SYSRST_WAVE511_VCE 49 > +#define JH7110_SYSRST_WAVE511_APB 50 > +#define JH7110_SYSRST_VDEC_JPG_ARB_JPG 51 > +#define JH7110_SYSRST_VDEC_JPG_ARB_MAIN 52 > +#define JH7110_SYSRST_AXIMEM0_AXI 53 > +#define JH7110_SYSRST_WAVE420L_AXI 54 > +#define JH7110_SYSRST_WAVE420L_BPU 55 > +#define JH7110_SYSRST_WAVE420L_VCE 56 > +#define JH7110_SYSRST_WAVE420L_APB 57 > +#define JH7110_SYSRST_AXIMEM1_AXI 58 > +#define JH7110_SYSRST_AXIMEM2_AXI 59 > +#define JH7110_SYSRST_INTMEM 60 > +#define JH7110_SYSRST_QSPI_AHB 61 > +#define JH7110_SYSRST_QSPI_APB 62 > +#define JH7110_SYSRST_QSPI_REF 63 > + > +#define JH7110_SYSRST_SDIO0_AHB 64 > +#define JH7110_SYSRST_SDIO1_AHB 65 > +#define JH7110_SYSRST_GMAC1_AXI 66 > +#define JH7110_SYSRST_GMAC1_AHB 67 > +#define JH7110_SYSRST_MAILBOX 68 > +#define JH7110_SYSRST_SPI0_APB 69 > +#define JH7110_SYSRST_SPI1_APB 70 > +#define JH7110_SYSRST_SPI2_APB 71 > +#define JH7110_SYSRST_SPI3_APB 72 > +#define JH7110_SYSRST_SPI4_APB 73 > +#define JH7110_SYSRST_SPI5_APB 74 > +#define JH7110_SYSRST_SPI6_APB 75 > +#define JH7110_SYSRST_I2C0_APB 76 > +#define JH7110_SYSRST_I2C1_APB 77 > +#define JH7110_SYSRST_I2C2_APB 78 > +#define JH7110_SYSRST_I2C3_APB 79 > +#define JH7110_SYSRST_I2C4_APB 80 > +#define JH7110_SYSRST_I2C5_APB 81 > +#define JH7110_SYSRST_I2C6_APB 82 > +#define JH7110_SYSRST_UART0_APB 83 > +#define JH7110_SYSRST_UART0_CORE 84 > +#define JH7110_SYSRST_UART1_APB 85 > +#define JH7110_SYSRST_UART1_CORE 86 > +#define JH7110_SYSRST_UART2_APB 87 > +#define JH7110_SYSRST_UART2_CORE 88 > +#define JH7110_SYSRST_UART3_APB 89 > +#define JH7110_SYSRST_UART3_CORE 90 > +#define JH7110_SYSRST_UART4_APB 91 > +#define JH7110_SYSRST_UART4_CORE 92 > +#define JH7110_SYSRST_UART5_APB 93 > +#define JH7110_SYSRST_UART5_CORE 94 > +#define JH7110_SYSRST_SPDIF_APB 95 > + > +#define JH7110_SYSRST_PWMDAC_APB 96 > +#define JH7110_SYSRST_PDM_DMIC 97 > +#define JH7110_SYSRST_PDM_APB 98 > +#define JH7110_SYSRST_I2SRX_APB 99 > +#define JH7110_SYSRST_I2SRX_BCLK 100 > +#define JH7110_SYSRST_I2STX0_APB 101 > +#define JH7110_SYSRST_I2STX0_BCLK 102 > +#define JH7110_SYSRST_I2STX1_APB 103 > +#define JH7110_SYSRST_I2STX1_BCLK 104 > +#define JH7110_SYSRST_TDM_AHB 105 > +#define JH7110_SYSRST_TDM_CORE 106 > +#define JH7110_SYSRST_TDM_APB 107 > +#define JH7110_SYSRST_PWM_APB 108 > +#define JH7110_SYSRST_WDT_APB 109 > +#define JH7110_SYSRST_WDT_CORE 110 > +#define JH7110_SYSRST_CAN0_APB 111 > +#define JH7110_SYSRST_CAN0_CORE 112 > +#define JH7110_SYSRST_CAN0_TIMER 113 > +#define JH7110_SYSRST_CAN1_APB 114 > +#define JH7110_SYSRST_CAN1_CORE 115 > +#define JH7110_SYSRST_CAN1_TIMER 116 > +#define JH7110_SYSRST_TIMER_APB 117 > +#define JH7110_SYSRST_TIMER0 118 > +#define JH7110_SYSRST_TIMER1 119 > +#define JH7110_SYSRST_TIMER2 120 > +#define JH7110_SYSRST_TIMER3 121 > +#define JH7110_SYSRST_INT_CTRL_APB 122 > +#define JH7110_SYSRST_TEMP_APB 123 > +#define JH7110_SYSRST_TEMP_CORE 124 > +#define JH7110_SYSRST_JTAG_CERTIFICATION 125 > + > +#define JH7110_SYSRST_END 126 > + > +/* AONCRG resets */ > +#define JH7110_AONRST_GMAC0_AXI 0 > +#define JH7110_AONRST_GMAC0_AHB 1 > +#define JH7110_AONRST_AON_IOMUX 2 > +#define JH7110_AONRST_PMU_APB 3 > +#define JH7110_AONRST_PMU_WKUP 4 > +#define JH7110_AONRST_RTC_APB 5 > +#define JH7110_AONRST_RTC_CAL 6 > +#define JH7110_AONRST_RTC_32K 7 > + > +#define JH7110_AONRST_END 8 > + > +#endif /* __DT_BINDINGS_RESET_STARFIVE_JH7110_H__ */ > -- > 2.38.1 >
On 18/11/2022 02:06, Hal Feng wrote: > From: Emil Renner Berthing <kernel@esmil.dk> > > Add resets for the StarFive JH7110 system (SYS) and always-on (AON) > reset controller. > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > --- > MAINTAINERS | 5 +- > include/dt-bindings/reset/starfive-jh7110.h | 154 ++++++++++++++++++++ > 2 files changed, 157 insertions(+), 2 deletions(-) > create mode 100644 include/dt-bindings/reset/starfive-jh7110.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index e97dac9c0ee4..eeab26f5597c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -19614,12 +19614,13 @@ F: Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml > F: drivers/pinctrl/starfive/ > F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h > > -STARFIVE JH7100 RESET CONTROLLER DRIVERS > +STARFIVE RESET CONTROLLER DRIVERS > M: Emil Renner Berthing <kernel@esmil.dk> > +M: Hal Feng <hal.feng@starfivetech.com> > S: Maintained > F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml > F: drivers/reset/starfive/ > -F: include/dt-bindings/reset/starfive-jh7100.h > +F: include/dt-bindings/reset/starfive* > > STATIC BRANCH/CALL > M: Peter Zijlstra <peterz@infradead.org> > diff --git a/include/dt-bindings/reset/starfive-jh7110.h b/include/dt-bindings/reset/starfive-jh7110.h Filename based / the same as compatible (or bindings filename). Best regards, Krzysztof
On 18/11/2022 02:06, Hal Feng wrote: > From: Emil Renner Berthing <kernel@esmil.dk> > > Add resets for the StarFive JH7110 system (SYS) and always-on (AON) > reset controller. > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > --- > MAINTAINERS | 5 +- > include/dt-bindings/reset/starfive-jh7110.h | 154 ++++++++++++++++++++ > 2 files changed, 157 insertions(+), 2 deletions(-) > create mode 100644 include/dt-bindings/reset/starfive-jh7110.h > Thank you for your patch. There is something to discuss/improve. > +#define JH7110_SYSRST_TIMER0 118 > +#define JH7110_SYSRST_TIMER1 119 > +#define JH7110_SYSRST_TIMER2 120 > +#define JH7110_SYSRST_TIMER3 121 > +#define JH7110_SYSRST_INT_CTRL_APB 122 > +#define JH7110_SYSRST_TEMP_APB 123 > +#define JH7110_SYSRST_TEMP_CORE 124 > +#define JH7110_SYSRST_JTAG_CERTIFICATION 125 > + > +#define JH7110_SYSRST_END 126 Drop weird indentation in the middle of syntax. > + > +/* AONCRG resets */ > +#define JH7110_AONRST_GMAC0_AXI 0 > +#define JH7110_AONRST_GMAC0_AHB 1 > +#define JH7110_AONRST_AON_IOMUX 2 > +#define JH7110_AONRST_PMU_APB 3 > +#define JH7110_AONRST_PMU_WKUP 4 > +#define JH7110_AONRST_RTC_APB 5 > +#define JH7110_AONRST_RTC_CAL 6 > +#define JH7110_AONRST_RTC_32K 7 > + > +#define JH7110_AONRST_END 8 Ditto > + > +#endif /* __DT_BINDINGS_RESET_STARFIVE_JH7110_H__ */ Best regards, Krzysztof
On Sat, 19 Nov 2022 00:47:21 +0800, Emil Renner Berthing wrote: > On Fri, 18 Nov 2022 at 02:06, Hal Feng <hal.feng@starfivetech.com> wrote: > > diff --git a/include/dt-bindings/reset/starfive-jh7110.h b/include/dt-bindings/reset/starfive-jh7110.h > > new file mode 100644 > > index 000000000000..1a5bab671161 > > --- /dev/null > > +++ b/include/dt-bindings/reset/starfive-jh7110.h > > @@ -0,0 +1,154 @@ > > +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ > > +/* > > + * Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk> > > I'm not sure how this ended up here, but I definitely didn't start > working on this before 2022. I just cherry-picked your commit. And I found the same problem in your latest branch. Anyway, I will fix it. Best regards, Hal
On Mon, 21 Nov 2022 09:50:13 +0100, Krzysztof Kozlowski wrote: > On 18/11/2022 02:06, Hal Feng wrote: > > From: Emil Renner Berthing <kernel@esmil.dk> > > > > Add resets for the StarFive JH7110 system (SYS) and always-on (AON) > > reset controller. > > > > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> > > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > > --- > > MAINTAINERS | 5 +- > > include/dt-bindings/reset/starfive-jh7110.h | 154 ++++++++++++++++++++ > > 2 files changed, 157 insertions(+), 2 deletions(-) > > create mode 100644 include/dt-bindings/reset/starfive-jh7110.h > > > > Thank you for your patch. There is something to discuss/improve. > > > +#define JH7110_SYSRST_TIMER0 118 > > +#define JH7110_SYSRST_TIMER1 119 > > +#define JH7110_SYSRST_TIMER2 120 > > +#define JH7110_SYSRST_TIMER3 121 > > +#define JH7110_SYSRST_INT_CTRL_APB 122 > > +#define JH7110_SYSRST_TEMP_APB 123 > > +#define JH7110_SYSRST_TEMP_CORE 124 > > +#define JH7110_SYSRST_JTAG_CERTIFICATION 125 > > + > > +#define JH7110_SYSRST_END 126 > > Drop weird indentation in the middle of syntax. Will fix it. > > > + > > +/* AONCRG resets */ > > +#define JH7110_AONRST_GMAC0_AXI 0 > > +#define JH7110_AONRST_GMAC0_AHB 1 > > +#define JH7110_AONRST_AON_IOMUX 2 > > +#define JH7110_AONRST_PMU_APB 3 > > +#define JH7110_AONRST_PMU_WKUP 4 > > +#define JH7110_AONRST_RTC_APB 5 > > +#define JH7110_AONRST_RTC_CAL 6 > > +#define JH7110_AONRST_RTC_32K 7 > > + > > +#define JH7110_AONRST_END 8 > > Ditto Will fix it. Thanks. Best regards, Hal
diff --git a/MAINTAINERS b/MAINTAINERS index e97dac9c0ee4..eeab26f5597c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19614,12 +19614,13 @@ F: Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml F: drivers/pinctrl/starfive/ F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h -STARFIVE JH7100 RESET CONTROLLER DRIVERS +STARFIVE RESET CONTROLLER DRIVERS M: Emil Renner Berthing <kernel@esmil.dk> +M: Hal Feng <hal.feng@starfivetech.com> S: Maintained F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml F: drivers/reset/starfive/ -F: include/dt-bindings/reset/starfive-jh7100.h +F: include/dt-bindings/reset/starfive* STATIC BRANCH/CALL M: Peter Zijlstra <peterz@infradead.org> diff --git a/include/dt-bindings/reset/starfive-jh7110.h b/include/dt-bindings/reset/starfive-jh7110.h new file mode 100644 index 000000000000..1a5bab671161 --- /dev/null +++ b/include/dt-bindings/reset/starfive-jh7110.h @@ -0,0 +1,154 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* + * Copyright (C) 2021-2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +#ifndef __DT_BINDINGS_RESET_STARFIVE_JH7110_H__ +#define __DT_BINDINGS_RESET_STARFIVE_JH7110_H__ + +/* SYSCRG resets */ +#define JH7110_SYSRST_JTAG2APB 0 +#define JH7110_SYSRST_SYSCON 1 +#define JH7110_SYSRST_IOMUX 2 +#define JH7110_SYSRST_BUS 3 +#define JH7110_SYSRST_DEBUG 4 +#define JH7110_SYSRST_CORE0 5 +#define JH7110_SYSRST_CORE1 6 +#define JH7110_SYSRST_CORE2 7 +#define JH7110_SYSRST_CORE3 8 +#define JH7110_SYSRST_CORE4 9 +#define JH7110_SYSRST_CORE0_ST 10 +#define JH7110_SYSRST_CORE1_ST 11 +#define JH7110_SYSRST_CORE2_ST 12 +#define JH7110_SYSRST_CORE3_ST 13 +#define JH7110_SYSRST_CORE4_ST 14 +#define JH7110_SYSRST_TRACE0 15 +#define JH7110_SYSRST_TRACE1 16 +#define JH7110_SYSRST_TRACE2 17 +#define JH7110_SYSRST_TRACE3 18 +#define JH7110_SYSRST_TRACE4 19 +#define JH7110_SYSRST_TRACE_COM 20 +#define JH7110_SYSRST_GPU_APB 21 +#define JH7110_SYSRST_GPU_DOMA 22 +#define JH7110_SYSRST_NOC_BUS_APB_BUS 23 +#define JH7110_SYSRST_NOC_BUS_AXICFG0_AXI 24 +#define JH7110_SYSRST_NOC_BUS_CPU_AXI 25 +#define JH7110_SYSRST_NOC_BUS_DISP_AXI 26 +#define JH7110_SYSRST_NOC_BUS_GPU_AXI 27 +#define JH7110_SYSRST_NOC_BUS_ISP_AXI 28 +#define JH7110_SYSRST_NOC_BUS_DDRC 29 +#define JH7110_SYSRST_NOC_BUS_STG_AXI 30 +#define JH7110_SYSRST_NOC_BUS_VDEC_AXI 31 + +#define JH7110_SYSRST_NOC_BUS_VENC_AXI 32 +#define JH7110_SYSRST_AXI_CFG1_DEC_AHB 33 +#define JH7110_SYSRST_AXI_CFG1_DEC_MAIN 34 +#define JH7110_SYSRST_AXI_CFG0_DEC_MAIN 35 +#define JH7110_SYSRST_AXI_CFG0_DEC_MAIN_DIV 36 +#define JH7110_SYSRST_AXI_CFG0_DEC_HIFI4 37 +#define JH7110_SYSRST_DDR_AXI 38 +#define JH7110_SYSRST_DDR_OSC 39 +#define JH7110_SYSRST_DDR_APB 40 +#define JH7110_SYSRST_DOM_ISP_TOP_N 41 +#define JH7110_SYSRST_DOM_ISP_TOP_AXI 42 +#define JH7110_SYSRST_DOM_VOUT_TOP_SRC 43 +#define JH7110_SYSRST_CODAJ12_AXI 44 +#define JH7110_SYSRST_CODAJ12_CORE 45 +#define JH7110_SYSRST_CODAJ12_APB 46 +#define JH7110_SYSRST_WAVE511_AXI 47 +#define JH7110_SYSRST_WAVE511_BPU 48 +#define JH7110_SYSRST_WAVE511_VCE 49 +#define JH7110_SYSRST_WAVE511_APB 50 +#define JH7110_SYSRST_VDEC_JPG_ARB_JPG 51 +#define JH7110_SYSRST_VDEC_JPG_ARB_MAIN 52 +#define JH7110_SYSRST_AXIMEM0_AXI 53 +#define JH7110_SYSRST_WAVE420L_AXI 54 +#define JH7110_SYSRST_WAVE420L_BPU 55 +#define JH7110_SYSRST_WAVE420L_VCE 56 +#define JH7110_SYSRST_WAVE420L_APB 57 +#define JH7110_SYSRST_AXIMEM1_AXI 58 +#define JH7110_SYSRST_AXIMEM2_AXI 59 +#define JH7110_SYSRST_INTMEM 60 +#define JH7110_SYSRST_QSPI_AHB 61 +#define JH7110_SYSRST_QSPI_APB 62 +#define JH7110_SYSRST_QSPI_REF 63 + +#define JH7110_SYSRST_SDIO0_AHB 64 +#define JH7110_SYSRST_SDIO1_AHB 65 +#define JH7110_SYSRST_GMAC1_AXI 66 +#define JH7110_SYSRST_GMAC1_AHB 67 +#define JH7110_SYSRST_MAILBOX 68 +#define JH7110_SYSRST_SPI0_APB 69 +#define JH7110_SYSRST_SPI1_APB 70 +#define JH7110_SYSRST_SPI2_APB 71 +#define JH7110_SYSRST_SPI3_APB 72 +#define JH7110_SYSRST_SPI4_APB 73 +#define JH7110_SYSRST_SPI5_APB 74 +#define JH7110_SYSRST_SPI6_APB 75 +#define JH7110_SYSRST_I2C0_APB 76 +#define JH7110_SYSRST_I2C1_APB 77 +#define JH7110_SYSRST_I2C2_APB 78 +#define JH7110_SYSRST_I2C3_APB 79 +#define JH7110_SYSRST_I2C4_APB 80 +#define JH7110_SYSRST_I2C5_APB 81 +#define JH7110_SYSRST_I2C6_APB 82 +#define JH7110_SYSRST_UART0_APB 83 +#define JH7110_SYSRST_UART0_CORE 84 +#define JH7110_SYSRST_UART1_APB 85 +#define JH7110_SYSRST_UART1_CORE 86 +#define JH7110_SYSRST_UART2_APB 87 +#define JH7110_SYSRST_UART2_CORE 88 +#define JH7110_SYSRST_UART3_APB 89 +#define JH7110_SYSRST_UART3_CORE 90 +#define JH7110_SYSRST_UART4_APB 91 +#define JH7110_SYSRST_UART4_CORE 92 +#define JH7110_SYSRST_UART5_APB 93 +#define JH7110_SYSRST_UART5_CORE 94 +#define JH7110_SYSRST_SPDIF_APB 95 + +#define JH7110_SYSRST_PWMDAC_APB 96 +#define JH7110_SYSRST_PDM_DMIC 97 +#define JH7110_SYSRST_PDM_APB 98 +#define JH7110_SYSRST_I2SRX_APB 99 +#define JH7110_SYSRST_I2SRX_BCLK 100 +#define JH7110_SYSRST_I2STX0_APB 101 +#define JH7110_SYSRST_I2STX0_BCLK 102 +#define JH7110_SYSRST_I2STX1_APB 103 +#define JH7110_SYSRST_I2STX1_BCLK 104 +#define JH7110_SYSRST_TDM_AHB 105 +#define JH7110_SYSRST_TDM_CORE 106 +#define JH7110_SYSRST_TDM_APB 107 +#define JH7110_SYSRST_PWM_APB 108 +#define JH7110_SYSRST_WDT_APB 109 +#define JH7110_SYSRST_WDT_CORE 110 +#define JH7110_SYSRST_CAN0_APB 111 +#define JH7110_SYSRST_CAN0_CORE 112 +#define JH7110_SYSRST_CAN0_TIMER 113 +#define JH7110_SYSRST_CAN1_APB 114 +#define JH7110_SYSRST_CAN1_CORE 115 +#define JH7110_SYSRST_CAN1_TIMER 116 +#define JH7110_SYSRST_TIMER_APB 117 +#define JH7110_SYSRST_TIMER0 118 +#define JH7110_SYSRST_TIMER1 119 +#define JH7110_SYSRST_TIMER2 120 +#define JH7110_SYSRST_TIMER3 121 +#define JH7110_SYSRST_INT_CTRL_APB 122 +#define JH7110_SYSRST_TEMP_APB 123 +#define JH7110_SYSRST_TEMP_CORE 124 +#define JH7110_SYSRST_JTAG_CERTIFICATION 125 + +#define JH7110_SYSRST_END 126 + +/* AONCRG resets */ +#define JH7110_AONRST_GMAC0_AXI 0 +#define JH7110_AONRST_GMAC0_AHB 1 +#define JH7110_AONRST_AON_IOMUX 2 +#define JH7110_AONRST_PMU_APB 3 +#define JH7110_AONRST_PMU_WKUP 4 +#define JH7110_AONRST_RTC_APB 5 +#define JH7110_AONRST_RTC_CAL 6 +#define JH7110_AONRST_RTC_32K 7 + +#define JH7110_AONRST_END 8 + +#endif /* __DT_BINDINGS_RESET_STARFIVE_JH7110_H__ */