| Message ID | 20221223094801.181315-2-xingyu.wu@starfivetech.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add timer driver for StarFive JH7110 RISC-V SoC | expand |
| Context | Check | Description |
|---|---|---|
| conchuod/tree_selection | fail | Failed to apply to next/pending-fixes or riscv/for-next |
On 23/12/2022 10:47, Xingyu Wu wrote: > Add bindings for the timer on the JH7110 > RISC-V SoC by StarFive Technology Ltd. Please wrap commit message according to Linux coding style / submission process (neither too early nor over the limit): https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586 > > Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> > --- > .../timer/starfive,jh7110-timers.yaml | 105 ++++++++++++++++++ > 1 file changed, 105 insertions(+) > create mode 100644 Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml > > diff --git a/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml > new file mode 100644 > index 000000000000..fe58dc056313 > --- /dev/null > +++ b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/timer/starfive,jh7110-timers.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: StarFive Timers Not enough, really not enough. Describe the hardware. > + > +maintainers: > + - Samin Guo <samin.guo@starfivetech.com> > + - Xingyu Wu <xingyu.wu@starfivetech.com> > + > +properties: > + compatible: > + const: starfive,jh7110-timers Why plural "timers", not "timer"? The module is usually called timer - see other hardware that type. > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: timer channel 0 interrupt > + - description: timer channel 1 interrupt > + - description: timer channel 2 interrupt > + - description: timer channel 3 interrupt > + > + interrupt-names: > + items: > + - const: timer0 > + - const: timer1 > + - const: timer2 > + - const: timer3 I would just drop the names, not really useful. Unless you plan to add here some generic interrupt (like you did for clock-names)? > + > + clocks: > + items: > + - description: timer channel 0 clock > + - description: timer channel 1 clock > + - description: timer channel 2 clock > + - description: timer channel 3 clock > + - description: APB clock > + > + clock-names: > + items: > + - const: timer0 > + - const: timer1 > + - const: timer2 > + - const: timer3 > + - const: apb > + > + resets: > + items: > + - description: timer channel 0 reset > + - description: timer channel 1 reset > + - description: timer channel 2 reset > + - description: timer channel 3 reset > + - description: APB reset > + > + reset-names: > + items: > + - const: timer0 > + - const: timer1 > + - const: timer2 > + - const: timer3 > + - const: apb > + > + clock-frequency: > + description: The frequency of the clock that drives the counter, in Hz. Why do you need it? Use common clk framework to get that frequency. Also, sort the nodes somehow, e.g. compatible/reg/clocks/clock-frequency/interrupts/resets. > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - resets > + - reset-names > + - clock-frequency > + > +unevaluatedProperties: false Did you test the binding? Best regards, Krzysztof
On 2022/12/23 18:25, Krzysztof Kozlowski wrote: > On 23/12/2022 10:47, Xingyu Wu wrote: >> Add bindings for the timer on the JH7110 >> RISC-V SoC by StarFive Technology Ltd. > > Please wrap commit message according to Linux coding style / submission > process (neither too early nor over the limit): > https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586 > > >> >> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> >> --- >> .../timer/starfive,jh7110-timers.yaml | 105 ++++++++++++++++++ >> 1 file changed, 105 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml >> >> diff --git a/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml >> new file mode 100644 >> index 000000000000..fe58dc056313 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml >> @@ -0,0 +1,105 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/timer/starfive,jh7110-timers.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: StarFive Timers > > > Not enough, really not enough. Describe the hardware. Will add. Thanks. > >> + >> +maintainers: >> + - Samin Guo <samin.guo@starfivetech.com> >> + - Xingyu Wu <xingyu.wu@starfivetech.com> >> + >> +properties: >> + compatible: >> + const: starfive,jh7110-timers > > Why plural "timers", not "timer"? The module is usually called timer - > see other hardware that type. > Will fix. Thanks. >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + items: >> + - description: timer channel 0 interrupt >> + - description: timer channel 1 interrupt >> + - description: timer channel 2 interrupt >> + - description: timer channel 3 interrupt >> + >> + interrupt-names: >> + items: >> + - const: timer0 >> + - const: timer1 >> + - const: timer2 >> + - const: timer3 > > I would just drop the names, not really useful. Unless you plan to add > here some generic interrupt (like you did for clock-names)? Will drop. Thanks. > >> + >> + clocks: >> + items: >> + - description: timer channel 0 clock >> + - description: timer channel 1 clock >> + - description: timer channel 2 clock >> + - description: timer channel 3 clock >> + - description: APB clock >> + >> + clock-names: >> + items: >> + - const: timer0 >> + - const: timer1 >> + - const: timer2 >> + - const: timer3 >> + - const: apb >> + >> + resets: >> + items: >> + - description: timer channel 0 reset >> + - description: timer channel 1 reset >> + - description: timer channel 2 reset >> + - description: timer channel 3 reset >> + - description: APB reset >> + >> + reset-names: >> + items: >> + - const: timer0 >> + - const: timer1 >> + - const: timer2 >> + - const: timer3 >> + - const: apb >> + >> + clock-frequency: >> + description: The frequency of the clock that drives the counter, in Hz. > > Why do you need it? Use common clk framework to get that frequency. Because normally this timer driver is loaded earlier than the clock tree driver, it won't get that frequency by clk framework and this 'clock-frequency' node is used instead. > > Also, sort the nodes somehow, e.g. > compatible/reg/clocks/clock-frequency/interrupts/resets. Will reorder. Thanks. > > >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + - interrupt-names >> + - clocks >> + - clock-names >> + - resets >> + - reset-names >> + - clock-frequency >> + >> +unevaluatedProperties: false > > Did you test the binding? Yes, I had tested by 'dt_binding_check'. Do you mean the 'unevaluatedProperties' is wrong and use 'additionalProperties'? Best regards, Xingyu Wu
On 10/01/2023 03:14, Xingyu Wu wrote: > On 2022/12/23 18:25, Krzysztof Kozlowski wrote: >> On 23/12/2022 10:47, Xingyu Wu wrote: >>> Add bindings for the timer on the JH7110 >>> RISC-V SoC by StarFive Technology Ltd. >> >> Please wrap commit message according to Linux coding style / submission >> process (neither too early nor over the limit): >> https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586 >> >> >>> >>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> >>> --- >>> .../timer/starfive,jh7110-timers.yaml | 105 ++++++++++++++++++ >>> 1 file changed, 105 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml >>> >>> diff --git a/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml >>> new file mode 100644 >>> index 000000000000..fe58dc056313 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml >>> @@ -0,0 +1,105 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/timer/starfive,jh7110-timers.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: StarFive Timers >> >> >> Not enough, really not enough. Describe the hardware. > > Will add. Thanks. > >> >>> + >>> +maintainers: >>> + - Samin Guo <samin.guo@starfivetech.com> >>> + - Xingyu Wu <xingyu.wu@starfivetech.com> >>> + >>> +properties: >>> + compatible: >>> + const: starfive,jh7110-timers >> >> Why plural "timers", not "timer"? The module is usually called timer - >> see other hardware that type. >> > > Will fix. Thanks. > >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + interrupts: >>> + items: >>> + - description: timer channel 0 interrupt >>> + - description: timer channel 1 interrupt >>> + - description: timer channel 2 interrupt >>> + - description: timer channel 3 interrupt >>> + >>> + interrupt-names: >>> + items: >>> + - const: timer0 >>> + - const: timer1 >>> + - const: timer2 >>> + - const: timer3 >> >> I would just drop the names, not really useful. Unless you plan to add >> here some generic interrupt (like you did for clock-names)? > > Will drop. Thanks. > >> >>> + >>> + clocks: >>> + items: >>> + - description: timer channel 0 clock >>> + - description: timer channel 1 clock >>> + - description: timer channel 2 clock >>> + - description: timer channel 3 clock >>> + - description: APB clock >>> + >>> + clock-names: >>> + items: >>> + - const: timer0 >>> + - const: timer1 >>> + - const: timer2 >>> + - const: timer3 >>> + - const: apb >>> + >>> + resets: >>> + items: >>> + - description: timer channel 0 reset >>> + - description: timer channel 1 reset >>> + - description: timer channel 2 reset >>> + - description: timer channel 3 reset >>> + - description: APB reset >>> + >>> + reset-names: >>> + items: >>> + - const: timer0 >>> + - const: timer1 >>> + - const: timer2 >>> + - const: timer3 >>> + - const: apb >>> + >>> + clock-frequency: >>> + description: The frequency of the clock that drives the counter, in Hz. >> >> Why do you need it? Use common clk framework to get that frequency. > > Because normally this timer driver is loaded earlier than the clock tree driver, it won't get > that frequency by clk framework and this 'clock-frequency' node is used instead. I don't think that clk framework or fixed clocks are not available at this time... of_clk_init is before timer. > >> >> Also, sort the nodes somehow, e.g. >> compatible/reg/clocks/clock-frequency/interrupts/resets. > > Will reorder. Thanks. > >> >> >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - interrupts >>> + - interrupt-names >>> + - clocks >>> + - clock-names >>> + - resets >>> + - reset-names >>> + - clock-frequency >>> + >>> +unevaluatedProperties: false >> >> Did you test the binding? > > Yes, I had tested by 'dt_binding_check'. Do you mean the 'unevaluatedProperties' is wrong > and use 'additionalProperties'? Yes, previously it was generating a warning but I do not see Rob's bot answer so maybe something changed. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml new file mode 100644 index 000000000000..fe58dc056313 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/starfive,jh7110-timers.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive Timers + +maintainers: + - Samin Guo <samin.guo@starfivetech.com> + - Xingyu Wu <xingyu.wu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-timers + + reg: + maxItems: 1 + + interrupts: + items: + - description: timer channel 0 interrupt + - description: timer channel 1 interrupt + - description: timer channel 2 interrupt + - description: timer channel 3 interrupt + + interrupt-names: + items: + - const: timer0 + - const: timer1 + - const: timer2 + - const: timer3 + + clocks: + items: + - description: timer channel 0 clock + - description: timer channel 1 clock + - description: timer channel 2 clock + - description: timer channel 3 clock + - description: APB clock + + clock-names: + items: + - const: timer0 + - const: timer1 + - const: timer2 + - const: timer3 + - const: apb + + resets: + items: + - description: timer channel 0 reset + - description: timer channel 1 reset + - description: timer channel 2 reset + - description: timer channel 3 reset + - description: APB reset + + reset-names: + items: + - const: timer0 + - const: timer1 + - const: timer2 + - const: timer3 + - const: apb + + clock-frequency: + description: The frequency of the clock that drives the counter, in Hz. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - clock-frequency + +unevaluatedProperties: false + +examples: + - | + timer@13050000 { + compatible = "starfive,jh7110-timers"; + reg = <0x13050000 0x10000>; + interrupts = <69>, <70>, <71> ,<72>; + interrupt-names = "timer0", "timer1", "timer2", "timer3"; + clocks = <&clk 125>, + <&clk 126>, + <&clk 127>, + <&clk 128>, + <&clk 124>; + clock-names = "timer0", "timer1", + "timer2", "timer3", "apb"; + resets = <&rst 118>, + <&rst 119>, + <&rst 120>, + <&rst 121>, + <&rst 117>; + reset-names = "timer0", "timer1", + "timer2", "timer3", "apb"; + clock-frequency = <24000000>; + }; +
Add bindings for the timer on the JH7110 RISC-V SoC by StarFive Technology Ltd. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> --- .../timer/starfive,jh7110-timers.yaml | 105 ++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/starfive,jh7110-timers.yaml