diff mbox series

[RESEND,v7,4/5] riscv: dts: allwinner: d1: Add LED controller node

Message ID 20221231235541.13568-5-samuel@sholland.org (mailing list archive)
State Handled Elsewhere
Delegated to: Conor Dooley
Headers show
Series leds: Allwinner A100 LED controller support | expand

Checks

Context Check Description
conchuod/tree_selection fail Failed to apply to next/pending-fixes or riscv/for-next

Commit Message

Samuel Holland Dec. 31, 2022, 11:55 p.m. UTC 
Allwinner D1 contains an LED controller. Add its devicetree node, as
well as the pinmux used by the reference board design.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---

(no changes since v5)

Changes in v5:
 - New patch for v5

 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi      |  6 ++++++
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 15 +++++++++++++++
 2 files changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
index 97e7cbb32597..28a6df83ec08 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
@@ -58,6 +58,12 @@  i2c2_pb0_pins: i2c2-pb0-pins {
 		function = "i2c2";
 	};
 
+	/omit-if-no-ref/
+	ledc_pc0_pin: ledc-pc0-pin {
+		pins = "PC0";
+		function = "ledc";
+	};
+
 	/omit-if-no-ref/
 	uart0_pb8_pins: uart0-pb8-pins {
 		pins = "PB8", "PB9";
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index dff363a3c934..6b70b3cf4965 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -138,6 +138,21 @@  ccu: clock-controller@2001000 {
 			#reset-cells = <1>;
 		};
 
+		ledc: led-controller@2008000 {
+			compatible = "allwinner,sun20i-d1-ledc",
+				     "allwinner,sun50i-a100-ledc";
+			reg = <0x2008000 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(20) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_LEDC>;
+			dmas = <&dma 42>;
+			dma-names = "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		dmic: dmic@2031000 {
 			compatible = "allwinner,sun20i-d1-dmic",
 				     "allwinner,sun50i-h6-dmic";