diff mbox series

[v1,1/4] dt-bindings: hwmon: Add starfive,jh71x0-temp

Message ID 20230103013145.9570-2-hal.feng@starfivetech.com (mailing list archive)
State Not Applicable
Headers show
Series Temperature sensor support for StarFive JH7110 RISC-V SoC | expand

Checks

Context Check Description
conchuod/tree_selection fail Failed to apply to next/pending-fixes or riscv/for-next

Commit Message

Hal Feng Jan. 3, 2023, 1:31 a.m. UTC
From: Emil Renner Berthing <kernel@esmil.dk>

Add bindings for the temperature sensor on the StarFive JH7100 and
JH7110 SoCs.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../bindings/hwmon/starfive,jh71x0-temp.yaml  | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml

Comments

Guenter Roeck Jan. 3, 2023, 10:14 p.m. UTC | #1
On Tue, Jan 03, 2023 at 09:31:42AM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
> 
> Add bindings for the temperature sensor on the StarFive JH7100 and
> JH7110 SoCs.
> 
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

The previous version of this bindings document (v3, 
https://patchwork.kernel.org/project/linux-hwmon/patch/20210726171802.1052716-2-kernel@esmil.dk/
had been reviewed by Rob Herring. Even though this version is named differently
(starfive,jh71x0-temp.yaml instead of starfive,jh7100-temp.yaml), the old version
should be referenced, and there should be a change log.

Guenter

> ---
>  .../bindings/hwmon/starfive,jh71x0-temp.yaml  | 75 +++++++++++++++++++
>  1 file changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
> new file mode 100644
> index 000000000000..2600881e2cdc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH71x0 Temperature Sensor
> +
> +maintainers:
> +  - Emil Renner Berthing <kernel@esmil.dk>
> +
> +description: |
> +  StarFive Technology Co. JH71x0 embedded temperature sensor
> +
> +properties:
> +  compatible:
> +    enum:
> +      - starfive,jh7100-temp
> +      - starfive,jh7110-temp
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: "sense"
> +      - const: "bus"
> +
> +  '#thermal-sensor-cells':
> +    const: 0
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    minItems: 2
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: "sense"
> +      - const: "bus"
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - resets
> +  - reset-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/starfive-jh7100.h>
> +    #include <dt-bindings/reset/starfive-jh7100.h>
> +
> +    tmon@124a0000 {
> +        compatible = "starfive,jh7100-temp";
> +        reg = <0x124a0000 0x10000>;
> +        clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
> +                 <&clkgen JH7100_CLK_TEMP_APB>;
> +        clock-names = "sense", "bus";
> +        #thermal-sensor-cells = <0>;
> +        interrupts = <122>;
> +        resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
> +                 <&rstgen JH7100_RSTN_TEMP_APB>;
> +        reset-names = "sense", "bus";
> +    };
Hal Feng Feb. 6, 2023, 5:16 p.m. UTC | #2
On Tue, 3 Jan 2023 14:14:05 -0800, Guenter Roeck wrote:
> On Tue, Jan 03, 2023 at 09:31:42AM +0800, Hal Feng wrote:
>> From: Emil Renner Berthing <kernel@esmil.dk>
>> 
>> Add bindings for the temperature sensor on the StarFive JH7100 and
>> JH7110 SoCs.
>> 
>> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
>> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> 
> The previous version of this bindings document (v3, 
> https://patchwork.kernel.org/project/linux-hwmon/patch/20210726171802.1052716-2-kernel@esmil.dk/
> had been reviewed by Rob Herring. Even though this version is named differently
> (starfive,jh71x0-temp.yaml instead of starfive,jh7100-temp.yaml), the old version
> should be referenced, and there should be a change log.

Will add the Reviewed-by tag of Rob and add a change log. Thank you again.

Best regards,
Hal
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
new file mode 100644
index 000000000000..2600881e2cdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
@@ -0,0 +1,75 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH71x0 Temperature Sensor
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+description: |
+  StarFive Technology Co. JH71x0 embedded temperature sensor
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-temp
+      - starfive,jh7110-temp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: "sense"
+      - const: "bus"
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: "sense"
+      - const: "bus"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+    #include <dt-bindings/reset/starfive-jh7100.h>
+
+    tmon@124a0000 {
+        compatible = "starfive,jh7100-temp";
+        reg = <0x124a0000 0x10000>;
+        clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
+                 <&clkgen JH7100_CLK_TEMP_APB>;
+        clock-names = "sense", "bus";
+        #thermal-sensor-cells = <0>;
+        interrupts = <122>;
+        resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
+                 <&rstgen JH7100_RSTN_TEMP_APB>;
+        reset-names = "sense", "bus";
+    };