| Message ID | 20230120141002.2442-7-ysionneau@kalray.eu (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Upstream kvx Linux port | expand |
On Fri, 20 Jan 2023 15:09:37 +0100, Yann Sionneau wrote: > From: Jules Maselbas <jmaselbas@kalray.eu> > > Add documentation for `kalray,kv3-1-ipi-ctrl` binding. > > Co-developed-by: Jules Maselbas <jmaselbas@kalray.eu> > Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> > Signed-off-by: Yann Sionneau <ysionneau@kalray.eu> > --- > > Notes: > V1 -> V2: new patch > > .../kalray/kalray,kv3-1-ipi-ctrl.yaml | 44 +++++++++++++++++++ > 1 file changed, 44 insertions(+) > create mode 100644 Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml: $id: 'http://devicetree.org/schemas/kalray/kalray,kv3-1-ipi-ctrl#' does not match 'http://devicetree.org/schemas/.*\\.yaml#' from schema $id: http://devicetree.org/meta-schemas/base.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml: 'maintainers' is a required property hint: Metaschema for devicetree binding documentation from schema $id: http://devicetree.org/meta-schemas/base.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml: 'oneOf' conditional failed, one must be fixed: 'unevaluatedProperties' is a required property 'additionalProperties' is a required property hint: Either unevaluatedProperties or additionalProperties must be present from schema $id: http://devicetree.org/meta-schemas/core.yaml# ./Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/kalray/kalray,kv3-1-ipi-ctrl.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.example.dtb: inter-processor-interrupt@ad0000: reg: [[0, 11337728], [0, 4096]] is too long From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.example.dtb: inter-processor-interrupt@ad0000: 'interrupt-parent' is a required property From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230120141002.2442-7-ysionneau@kalray.eu The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 20/01/2023 15:09, Yann Sionneau wrote: > From: Jules Maselbas <jmaselbas@kalray.eu> > > Add documentation for `kalray,kv3-1-ipi-ctrl` binding. > > Co-developed-by: Jules Maselbas <jmaselbas@kalray.eu> > Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> > Signed-off-by: Yann Sionneau <ysionneau@kalray.eu> > --- > > Notes: > V1 -> V2: new patch > > .../kalray/kalray,kv3-1-ipi-ctrl.yaml | 44 +++++++++++++++++++ > 1 file changed, 44 insertions(+) > create mode 100644 Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml Wrong directory. Interrupt controllers go to respective subsystem directory. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml b/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml new file mode 100644 index 000000000000..dc8026b12905 --- /dev/null +++ b/Documentation/devicetree/bindings/kalray/kalray,kv3-1-ipi-ctrl.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/kalray/kalray,kv3-1-ipi-ctrl# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kalray kv3-1 Inter-Processor Interrupt Controller (IPI) + +description: | + The Inter-Processor Interrupt Controller (IPI) provides a fast synchronization + mechanism to the software. It exposes eight independent set of registers that + can be use to notify each processor in the cluster. + A set of registers contains two 32-bit registers: + - 17-bit interrupt control, one bit per core, raise an interrupt on write + - 17-bit mask, one per core, to enable interrupts + + Bit at offsets 0 to 15 selects cores in the cluster, respectively PE0 to PE15, + while bit at offset 16 is for the cluster Resource Manager (RM) core. + + The eight output interrupts are connected to each processor core interrupt + controller (intc). + +properties: + compatible: + const: kalray,kv3-1-ipi-ctrl + reg: + maxItems: 1 + +required: + - compatible + - reg + - interrupt-parent + - interrupts + +examples: + - | + ipi: inter-processor-interrupt@ad0000 { + compatible = "kalray,kv3-1-ipi-ctrl"; + reg = <0x00 0xad0000 0x00 0x1000>; + interrupt-parent = <&intc>; + interrupts = <24>; + }; + +...